Abstract
Airport terminals are key infrastructures with rapid development currently, where the air-conditioning (AC) systems aim to guarantee the normal operation. This research investigated the AC systems in seven Chinese hub airport terminals by a large-scale on-site measurement. The average annual electricity consumption was 177 kWh/(m2 · year), in which 30–60% was consumed by AC systems. The terminal device of AC systems is one of the key components restricting the cooling performance. The commonly used terminal devices (i.e. air handling units) accounted for 40–74% of the AC electricity consumption. As an alternative, the AC system combining radiant floor and displacement ventilation could save 34% of the AC electricity consumption in one investigated airport terminal. Furthermore, the designed cooling capacities were 132–176 W/m2, while the measured values were only 43–90 W/m2. Thus, the AC systems, especially the terminal devices, should have the ability to adjust cooling capacity over a wide range to cope with this prevailing situation of low load rates. This study is beneficial for the design and operation of AC systems in airport terminals.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
