This study discusses the use of a membrane module for semi-direct evaporative air cooling. A cross-flow membrane module was used to carry out this air treatment process. For such a flow, it was proposed to describe and solve the heat and mass transfer model as a one-dimensional problem. The mathematical model was used to determine the moisture content and air temperature at the outlet from the module and the temperature of the circulating water. Results obtained using the proposed model are in good agreement with the experimental data. The relative error for the air temperature at the module outlet did not exceed 0.5%. For the moisture content, the relative error did not exceed 4%. For the circulating water temperature, the relative error did not exceed 0.6%. This paper also discusses the heating efficiency of the evaporative cooling process. Methods for determining the unit cooling indicator and the energy efficiency ratio are also proposed.
ASHRAE.Handbook of HVAC applications.
Atlanta:
ASHRAE, 2011.
2.
HeidarinejadGBozorgmehrMDelfaniSEsmaeelianJ.Experimental investigation of two-stage indirect/direct evaporative cooling system in various climatic conditions. Build Environ2009;
44: 2073–2079.
3.
HeidarinejadGHeidarinejadMDelfaniSEsmaeelianJ.Feasibility of using various kinds of cooling systems in a multi-climates country. Energ Build2008;
40: 1946–1953.
4.
GilaniNPoshtiriAH.Heat exchanger design of direct evaporative cooler based on outdoor and indoor environmental conditions. J Therm Sci Eng Appl2014;
6: 1–9.
5.
KovačevićISourbronM.The numerical model for direct evaporative cooler. Appl Therm Eng2017;
113: 8–19.
6.
BishoyiDSudhakarK.Experimental performance of a direct evaporative cooler in composite climate of India. Energ Build2017;
153: 190–200.
7.
SultanMEl-SharkawyIIMiyazakiTSahaBBKoyamaS.An overview of solid desiccant dehumidification and air conditioning systems. Renew Sust Energ Rev2015;
46: 16–29.
8.
WoodsJ.Membrane processes for heating, ventilation, and air conditioning. Renew Sust Energ Rev2014;
33: 290–304.
9.
LabbanOChenTGhoniemAFLienhardVJHNorfordLK.Next-generation HVAC: prospects for and limitations of desiccant and membrane-based dehumidification and cooling. Appl Energ2017;
200: 330–346.
10.
YangBYuanWGaoFGuoB.A review of membrane-based air dehumidification. Indoor Built Environ2015;
24: 11–26.
11.
EnglartS. An experimental study of the air humidification process using a membrane contactor. In: 9th Conference on interdisciplinary problems in environmental protection and engineering EKO-DOK 2017, Boguszow-Gorce, Poland, April 23–25 2017, E3S Web Conf 2017; 17: 00021.
12.
EnglartS. Experimental study of air evaporative cooling process using microporous membranes. In: International conference on advances in energy systems and environmental engineering (ASEE17), Wrocław, Poland, July 2–5 2017, E3S Web Conf 2017; 22: 00040.
13.
HuangSMZhangLZPeiLX.Transport phenomena in a cross-flow hollow fibre membrane bundle used for liquid desiccant air dehumidification.Indoor Built Environ2013;
22: 559–574.
14.
ZhangLZCaiRRXuJC.Moisture transport through asymmetric porous membranes with finger-like holes for indoor humidity control: a lattice Boltzmann simulation approach. Indoor Built Environ2016;
25: 151–168.
15.
BergeroSChiariA.Experimental and theoretical analysis of air humidification/dehumidification processes using hydrophobic capillary contactors. Appl Therm Eng2001;
21: 1119–1135.
16.
JohnsonDWYavuzturkCPruisJ.Analysis of heat and mass transfer phenomena in hollow fiber membranes used for evaporative cooling. J Membr Sci2003;
227: 159–171.
17.
ZhangLZHuangSM.Coupled heat and mass transfer in a counter flow hollow fiber membrane module for air humidification. Int J Heat Mass Transfer2011;
54: 1055–1063.
18.
ZhangLZ.Coupled heat and mass transfer in an application-scale cross-flow hollow fiber membrane module for air humidification. Int J Heat Mass Transfer2012;
55: 5861–5869.
19.
YangBYuanWHeXRenK.Air dehumidification by hollow fibre membrane with chilled water for spacecraft applications. Indoor Built Environ2016;
25: 758–771.
20.
ChenXSuYAydinDZhangXDingYReayDLawRRiffatS.Experimental investigations of polymer hollow fibre integrated evaporative cooling system with the fibre bundles in a spindle shape. Energ Build2017;
154: 166–174.
MahmudHKumarANarbaitzRMMatsuuraT.A study of mass transfer in the membrane air-stripping process using microporous polypropylene hollow fibers. J Membr Sci2000;
179: 29–41.
23.
EnglartS. Comparison heat and mass transfer coefficients in the shell side of the hollow fiber membrane module. In: 10th Conference on interdisciplinary problems in environmental protection and engineering EKO-DOK 2018, Polanica-Zdroj, Poland, April 16–18 2018, E3S Web Conf 2018; 44: 00040.
24.
CharlesNTJohnsonDW.The occurrence and characterization of fouling during membrane evaporative cooling. J Membr Sci2008;
319: 44–53.
25.
TomaszewskaMGrytaMMorawskiAW.Mass transfer of HCl and H2O across the hydrophobic membrane during membrane distillation. J Membr Sci2000;
166: 149–157.
26.
IncroperaFPDeWittDPBergmanTLLavineAS.Fundamentals of heat and mass transfer.
New York:
John Wiley & Sons Publishers Inc., 2007.
WattJR.Evaporative air conditioning handbook.
New York:
Chapman and Hall, 1986.
29.
Joint Committee Guides Metrology. Evaluation of measurement data – guide to the expression of uncertainty in measurement (GUM). Sèvres: Joint Committee Guides Metrology, Bureau International des Poids et Mesures, 2008.
30.
ZhangLZLiZXZhongTSPeiLX.Flow maldistribution and performance deteriorations in a cross flow hollow fiber membrane module for air humidification. J Membr Sci2013;
427: 1–9.
