The effect of envelope components on thermal performance of rural houses in Hubei,China

Abstract

Most farm houses in China are self-built. The process of design and construction of these houses generally lack theoretical and technical support logic and they do not comply with national standards. The objective of this research was to improve the thermal properties of farm houses in hot summer and cold winter regions of China. A rural house in Zijin Zhuang village, Hubei Province was selected to identify ways to improve its enclosure and the thermal performance of its building envelope. This paper considers the relationship between enclosure structure and thermal comfort, by quantitative comparison and analysis of thermal environmental data before and after refurbishment. DesignBuilder software was used to simulate the amount of energy consumed to attain the same indoor thermal comfort before and after the refurbishment. This study provides a reference exemplar for the construction of these farm houses in hot summer and cold winter areas.

Keywords

Rural houses Building envelope Thermal performance Refurbishment Thermal comfort China

Get full access to this article

View all access options for this article.

References

Yang

Peng

The multi-objective optimization design of the indoor thermal environment in the rural house-the practice of the reconstruction of the rural self-built housing in Chongqing. New Archit 2016; 169: 12–17 (in Chinese).

GB 50176-2016. National standard of People's Republic of China: code for thermal design of civil buildings. Beijing, China: Standardization Administration of China, 2016 (in Chinese).

ANSI/ASHRAE Standard 55-2017. Thermal environmental conditions for human occupancy. Atlanta: American Society of Heating, Refrigerating and Air-conditioning Engineers, 2017.

Peeters

de Dear

Hensen

D’Haeseleer

Thermal comfort in residential buildings: comfort values and scales for building energy simulation. Appl Energy 2009; 86: 772–780.

Yuan

Gan

Huang

Assessment of indoor thermal comfort. J Hubei Univ 2011; 23: 140–142.

Yuan

Paying attention to technology, emphasizing facts, advocating nature. World Archit 2002; 150: 18–21 (in Chinese).

Sarkar

Bose

Exploring impact of opaque building envelope components on thermal and energy performance of houses in lower western Himalayans for optimal selection. J Build Eng 2016; 7: 170–182.

Yang

Tian

Low-energy envelope design of residential building in hot summer and cold winter zone in China. Energy Build 2008; 40: 1536–1546.

Yan

Kong

Cao

Zhang

Meng

Investigation on passive energy-saving technologies of demonstration houses in Taohai pasture. Proc Eng 2017; 205: 2910–2917.

10.

Sadineni

Madala

Boehm

RF.

Passive building energy savings: a review of building envelope components. Renewable Sustain Energy Rev 2011; 15: 3617–3631.

11.

Serrano

de Gracia

Cabeza

LF.

Adaptation of rammed earth to modern construction systems. Appl Energy 2016; 175: 180–188.

12.

Liu

Wang

Ren

Xiao

Zhao

A preliminary study on the climate adaptive design of green rural houses in west China. Proc Eng 2017; 180: 735–740.

13.

Missoum

Hamidat

Loukarfi

Abdeladim

Impact of rural housing energy performance improvement on the energy balance in the North-West of Algeria. Energy Build 2014; 85: 374–388.

14.

Zhang

Jin

Thermal comfort in interior and semi-open spaces of rural folk houses in hot-humid areas. Build Environ 2018; 128: 336–347.

15.

Wang

Construction and design of sustainable housing in china's rural areas. Nanjing, China: Southeast University Press, 2014 (in Chinese).

16.

Wang

Huang

Ecotypic farmhouse adjusting measures to local conditions-study of farmhouse in Yizi Village of Linyi, Shandong (in Chinese). Huazhong Archit 2007; 25: 115–118.

17.

Zhang

Yang

Environmental evaluation of thermal insulation glazed hollow bead mortar. Constr Conserves Energy 2008; 36: 44–46 (in Chinese).

18.

GB/T50785-2012. Evaluation standard for indoor thermal environment in civil buildings. Beijing, China: Standardization Administration of China, 2012 (in Chinese).

19.

GB/T50824-2013. National standard of People's Republic of China: design standard for energy efficiency of rural residential buildings. Beijing, China: Standardization Administration of China, 2013 (in Chinese).

20.

GB/T18883-2002. National standard of People's Republic of China: indoor air quality standard. Beijing, China: Standardization Administration of China, 2002 (in Chinese).

21.

Boafo

Ahn

J-G

Kim

J-T

Kim

J-H.

Computing thermal bridge of VIP in building retrofits using DesignBuilder. Energy Proc 2015; 78: 400–405.

22.

National Meteorological Information Center, http://data.cma.cn/ (accessed 12 October 2017).