Heat shock is generated from zonal temperature differences. The pre-heating control through an air conditioning system can provide a good thermal environment, and reduce the risk of suffering heat shock in a house and with low energy consumption. In this study, a room air-conditioner (RAC) and air recirculating fan system (ARF) connected to the temperature zone of living room and washing room are applied in a detached house. The design aims to reduce the overconsumption of system energy and fulfil the healthy demand. With low air supply velocity (0.5 m/s) of ARF, the floor supply case can produce a saving of 33.9% energy for RAC to reach the target temperature 20°C in wash room (0.8 m height) in comparison to the ceiling supply case. However, return opening located on the floor was closer to RAC compared to ceiling case, hence, place of return opening should be accounted for energy reduction rate relatively.
TomanekL.Variation in the heat shock response and its implication for predicting the effect of global climate change on species’ biogeographical distribution ranges and metabolic costs.J Experiment Biol2010;
213: 971–979.
4.
FanYQToyoshimaMTakedaE. Influence of different air distraction system on “thermal – barrier –free” and energy saving – a case study on detached house in Japan. In Indoor Air 2016: Proceedings of the 14th International Conference on Indoor Air Quality and Climate, ISIAQ, Ghent, Belgium, 3rd – 8th July 2016.
5.
ANSI/ASHRAE Standard 55-2013. Thermal environment conditions for human occupancy.
Atlanta, GA:
American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2013.
6.
GaoNPZhangHNiuJL.Investigating indoor air quality and thermal comfort using a numerical thermal manikin.Indoor Built Environ2007;
16: 7–17.
7.
LaiDChenQ.A two-dimensional model for calculating heat transfer in the human body in a transient and non-uniform thermal environment.Energy Build2016;
118: 114–122.
8.
ZhuHWangHQYuCLiuZQ. Effects of simulated weightlessness on thermal sweating of human body: an experimental study. Indoor Built Environ2018, https://doi.org/10.1177/1420326X18770501 (accessed 26 June 2018).
9.
PeetersLDearRHensenJD’haeseleerW.Thermal comfort in residential buildings: comfort values and scales for building energy simulation.Appl Energy2009;
86: 772–780.
CaoGAwbiHBYaoRFanYQSirenKKosonenKZhangJ.A review of the performance of different ventilation and airflow distribution systems in buildings.Build Environ2014;
73: 171–186.
12.
FanYQItoK.Energy consumption analysis intended for real office space with energy recovery ventilator by integrating BES and CFD approaches.Build Environ2012;
52: 57–67.
13.
FanYQItoK.Integrated BES-CFD simulation for estimating the energy saving effect of energy recovery ventilator with CO2 demand-control ventilation system in office space.Indoor Built Environ2014;
23: 785–803.
IwafuneYYagitaY.High-resolution determinant analysis of Japanese residential electricity consumption using home energy management system data.Energy Build2016;
116: 274–284.
16.
ShimodaYYamaguchiYOkamuraTYamaguchiY.Prediction of greenhouse gas reduction potential in Japanese residential sector by residential energy end-use model.Appl Energy2010;
87: 1944–1952.
17.
FanYQToyashimaMSaitoM.Energy conservation and thermal environment analysis of room air conditioner with intermittent supply airflow.Int J Low-Carbon Technol2018;
13: 84–91.
18.
ANSI/ASHRAE Standard 62.1-2010. Ventilation for acceptable indoor air quality.
Atlanta, GA:
American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2010.
19.
ZhaiZQZhangZZhangWChenQ.Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: Part 1—summary of prevalent turbulence models.HVAC & R Res2007;
14: 853–870.
20.
ItoKKiaoIKurabuchiTUedaTEndoT.CFD benchmark tests for indoor environmental problems: Part 1 – isothermal/non-isothermal flow in 2D and 3D room model.Int J Architect Eng Technol2015;
2: 1–22.
21.
SrebricJChenQ.An example of verification, validation, and reporting of indoor environment CFD analyses (RP-1133). ASHRAE Transact2002;
108: 185–194.
22.
FanYQItoK.Optimization of indoor environmental quality and ventilation load in office space by multilevel coupling of BES and CFD.Build Simul2014;
7: 649–659.
23.
ZhangZZhangWZhaiZJChenQ.Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: Part 2 – comparison with experimental data from literature.HVAC & R Res2007;
13: 871–886.
24.
Kato S. Review of airflow and transport analysis in building using CFD and network model. Architectural Institute of Japan 2018; 1(3):299–309.
