The effect of temperature of the heating system elements is a parameter that could affect the airflow in terms of buoyancy and thermal comfort and that should be studied to ensure the quality of ventilation. This study aimed to assess the air change efficiency and thermal comfort with three thermal conditioning systems (radiators, underfloor heating and radiant ceiling) in winter conditions, varying its position in the interior space. This can be used by architects and engineers when planning the position of the heating systems or refurbishing a room. The experimental analysis was developed in the test chamber of the Laboratory of Ventilation of the University of Valladolid, serving as validation of multiple CFD simulations. The results show that, being the thermal comfort achieved, the mean air change efficiency varied only 2.40% among all cases, which makes this factor not significant. Even so, the trajectory of the airflow in the premise would be affected by the thermal action, due to the convective effect, presenting great differences according to the location of the thermal systems. Thus, the air trajectory could falter when it enters the room or rise towards the ceiling creating areas with lower temperature in its centre.
TianLLinZLiuJYaoTWangQ.The impact of temperature on mean local air age and thermal comfort in a stratum ventilated office. Build Environ2011;
46: 501–510.
3.
Pérez-LombardLOrtizJPoutC.A review on buildings energy consumption information. Energy Build2008;
40: 394–398.
4.
European Commission. SECH Project – SpaHousec. Analyses of the energy consumption of the household sector in Spain – final report. IDAE General Secretary Planning and Studies Department, Brussels, 16 June 2011.
5.
SandbergM.What is ventilation efficiency?Build Environ1981;
16: 123–135.
6.
LiddamentMW.A guide to energy efficient ventilation.
Coventry:
AIVC, 1996.
7.
MundtEMartin MathisenHNielsenPVMoserA. Guidebook No. 02: ventilation effectiveness. Mundt E (ed.) Helsinki: REHVA (Federation of European Heating and Air-conditioning Associations), 2004.
8.
MeissAFeijóMJ.Influencia de la ubicación de las aberturas en la eficiencia de la ventilación en viviendas. Inf la.Inf Constr2011;
63: 53–60.
9.
LiXWangXLiXLiY. Investigation on the relationship between flow pattern and air age. In: Sixth international IBPSA conference (Vol. II) IBPSA, Kyoto, Japan, September 13–15 1999.
10.
LeeKChoiS.Effect of geometric parameters on ventilation performance in a dry room. Dry Technol2002;
20: 1445–1461.
11.
HassanMAGuirguisNMShaalanMREl-ShazlyKM.Investigation of effects of window combinations on ventilation characteristics for thermal comfort in buildings. Desalination2007;
209: 251–260.
12.
GaoCFLeeWL.Evaluating the influence of openings configuration on natural ventilation performance of residential units in Hong Kong. Build Environ2011;
46: 961–969.
13.
NohK-CHanC-WOhM-D.Effect of the airflow rate of a ceiling type air-conditioner on ventilation effectiveness in a lecture room. Int J Refrig2008;
31: 180–188.
14.
ChaoCYHTungTCWBurnettJ.Influence of ventilation on indoor radon level. Build Environ1997;
32: 527–534.
15.
AwbiHB.Ventilation of buildings.
Abingdon, UK:
Taylor & Francis, 1991.
16.
KlepeisNENelsonWCOttWRRobinsonJPTsangAMSwitzerPBeharJVHernSCEngelmannWH.The National Human Activity Pattern Survey (NHAPS): a resource for assessing exposure to environmental pollutants. J Expo Sci Environ Epidemiol2001;
11: 231–252.
17.
WargockiP. Ventilation, indoor air quality, health, and productivity. In: Alan Hedge (Ed.) Ergonomic workplace design for health, wellness, and productivity. Abingdon, UK: Taylor & Francis, 2016, pp.39–72.
18.
FangerPO.Thermal comfort.
New York:
McGraw-Hill Book Company, 1973, p.256.
19.
LinZYaoTChowTTFongKFChanLS.Performance evaluation and design guidelines for stratum ventilation. Build Environ2011;
46: 2267–2279.
20.
ZhaoHLiuZZuoZ.Numerical simulation of indoor thermal environment effected by air supply temperature and grille angle on stratum ventilation in a typical office. Procedia Eng2015;
121: 779–784.
21.
MeissAFeijó-MuñozJGarcía-FuentesMA.Age-of-the-air in rooms according to the environmental condition of temperature: a case study. Energy Build2013;
67: 88–96.
22.
SandbergMEtheridgeDW.Building ventilation: theory and measurement.
Chichester:
John Wiley & Sons, 1996, p.754.
23.
KarmannCSchiavonSBaumanF.Thermal comfort in buildings using radiant vs. all-air systems: a critical literature review. Build Environ2017;
111: 123–131.
24.
OlesenBWMortensenEThorshaugeJBerg-MunchB.Thermal comfort in a room heated by different methods. ASHRAE Trans1980;
86: 34–48.
25.
CausoneFBaldinFOlesenBWCorgnatiSP.Floor heating and cooling combined with displacement ventilation: possibilities and limitations. Energy Build. 201;
42: 2338–2352.
26.
ReesSJHavesP.An experimental study of air flow and temperature distribution in a room with displacement ventilation and a chilled ceiling. Build Environ2013;
59: 358–368.
27.
DavidsonLOlssonE.Calculation of age and local purging flow rate in rooms. Build Environ1987;
22: 111–127.
28.
EN 13141-1. Ventilation for buildings – performance testing of components/products for residential ventilation – part 1: externally and internally mounted air transfer devices.
Brussels:
European Committee for Standardization (CEN), 2004.
29.
ISO 9972:2015. Thermal performance of buildings – determination of air permeability of buildings – fan pressurization method.
Geneva:
International Organization for Standardization (ISO), 2015.
30.
EN 1264-5:2009. Water based surface embedded heating and cooling systems. Part 5: heating and cooling surfaces embedded in floors, ceilings and walls. Determination of the thermal output.
Brussels:
European Committee for Standardization (CEN), 2009.
31.
Ministerio de Fomento. Documento básico HS – salubridad.
Madrid:
Gobierno de España, 2017.
32.
SandbergMSjöbergM.The use of moments for assessing air quality in ventilated rooms. Build Environ1983;
18: 181–197.
33.
ChowWFungWWongL.Preliminary studies on a new method for assessing ventilation in large spaces. Build Environ2002;
37: 145–152.
34.
CollinsBGSmithDB.The measurement of ventilation rates using a radioactive tracer. J Inst Heat Vent Eng1955;
23: 270–274.
35.
HuntCM.Air infiltration: a review of some existing measurement techniques and data. In: HuntCMKingJCTrechselHR (eds) Building air change rate and infiltration measurements.
West Conshohocken:
ASTM International, STP27521S, 1980, pp.3–23.
36.
ShawCY.The Effect of tracer gas on the accuracy of air-change measurements in buildings. ASHRAE Trans1984;
90: 212–225.
37.
ASTM E741-11(2017). Standard test method for determining air change in a single zone by means of a tracer gas dilution.
West Conshohocken, PA:
ASTM International, 2011.
38.
GmbHLT.Innova airtech instruments a/S, measuring gases with the help of microphones.
Frankfurt am Main:
Innova Airtech Instruments, 2005.
39.
MahyuddinNAwbiHBEssahEA.Computational fluid dynamics modelling of the air movement in an environmental test chamber with a respiring manikin. J Build Perform Simul2015;
8: 359–374.
40.
NielsenPVAllardFAwbiHBDavidsonLSchälinA. Guidebook No.10: computational fluid dynamics in ventilation design. Nielsen PV (ed.) Helsinki: REHVA (Federation of European Heating and Air-conditioning Associations), 2007.
41.
RichtmyerRDMortonKW.Difference methods for initial-value problems.
Geneva:
Interscience Publishers, 1967.
42.
von KármánT.Mechanische ähnlichkeit und turbulenz. Nachrichten von der gesellschaft der wissenschaften zu göttingen, fachgr 1. Göttingen: Weidmannsche Buchh., 1930; 5: 58–76.
43.
YakhotVOrszagSA.Renormalization group analysis of turbulence. I. Basic theory. J Sci Comput1986;
1: 3–51.
44.
MurakamiSMochidaA.3-D numerical simulation of airflow around a cubic model by means of the model. J Wind Eng Ind Aerodyn1988;
31: 283–303.
45.
EN 13779:2008. Ventilation for non-residential buildings – performance requirements for ventilation and room-conditioning systems.
Brussels:
European Committee for Standardization (CEN), 2008.
