An internal fire whirl can be generated by a pool fire burning in a vertical shaft with a single corner gap of appropriate width. In an internal fire whirl, the flame height is an important characteristic in terms of fire safety. In this paper, a correlation expression of flame height with the width of a single corner gap was studied using reported experimental data in a 9-m tall vertical shaft model. A pool of gasoline fuel was burnt inside the shaft model to study the characteristics of flame swirling. An internal fire whirl was generated for gap widths lying between 0.11 m and 0.66 m, when the pool fire was 0.46 m diameter. The flame height was between 2.5 m and 3.2 m. From the experimental observations on flame swirling for different gap widths, coupled with three assumptions on variation of air entrainment velocity with height, an expression relating the flame height and the corner gap width was derived for the internal fire whirl using a set of compiled experimental data. The correlation expression obtained would be useful for fire safety design in vertical shafts.
Emmons HW and Ying SJ. The fire whirl. In: Proceedings of the 11th international symposium on combustion. Berkeley, CA, August 14–20 1966., Pittsburgh, PA: Combustion Institute, 1967; pp. 475–488.
2.
Satoh K and Yang KT. Experimental observations of swirling fires. In: Proceedings of the ASME heat transfer division 1996: international mechanical engineering congress and exposition, Atlanta, GA, November 17–22 1996, American Society of Mechanical Engineers, HTD-Vol. 335, Vol. 4: 393–400.
3.
SnegirevAYMarsdenJAFrancisJMakhviladzeGM. Numerical studies and experimental observations of whirling flames. Int J Heat Mass Transf2004; 47: 2523–2539.
4.
Meroney RN. Fire whirls and building aerodynamics. In: Proceedings of 11th international conference on wind engineering, Texas Tech University, Lubbock, TX, June 2–5 2003; pp. 1–10.
5.
KuwanaKSekimotoKSaitoKWilliamsFA. Scaling fire whirls. Fire Safety J2008; 43: 252–257.
6.
LeiJLiuNAZhangLHChenHXShuLFChenPDengZHZhuJPSatohKde RisJL. Experimental research on combustion dynamics of medium-scale fire whirl. Proc Combust Inst2011; 33: 2407–2415.
7.
YangZSarkarPHuH. An experimental study of a high-rise building model in tornado-like winds. J Fluids Struct2011; 27: 471–486.
8.
YuHGuoSPengMLiQRuanJWanWChenC. Study on the influence of air-inlet width on fire whirls combustion characteristic. Proc Eng2013; 62: 813–820.
9.
LeiJLiuNLozanoJSZhangLDengZSatohK. Experimental research on flame revolution and precession of fire whirls. Proc Combust Inst2013; 34: 2607–2615.
10.
HayashiYKuwanaKMogiTDobashiR. Influence of vortex parameters on the flame height of a weak fire whirl via heat feedback mechanism. J Chem Eng Japan2013; 46: 689–694.
11.
BattagliaFMcGrattanKRehmRGBaumHR. Simulating fire whirls. Combust Theor Model2000; 4: 123–138.
12.
BattagliaFRehmRGBaumHR. The fluid mechanics of fire whirls: an inviscid model. Phys Fluids2000; 12: 2859–2867.
13.
HayashiYKuwanaKDobashiR. Influence of vortex structure on fire whirl behavior. Fire Saf Sci2011; 10: 671–679.
14.
KlimenkoAYWilliamsFA. On the flame length in fire whirls with strong vorticity. Combust Flame2013; 160: 335–339.
15.
ChuahKHKushidaG. The prediction of flame heights and flame shapes of small fire whirls. Proc Combust Inst2007; 31: 2599–2606.
16.
ChuahKHKuwanaKSaitoK. Modeling a fire whirl generated over a 5-cm-diameter methanol pool fire. Combust Flame2009; 156: 1828–1833.
17.
Matsuyama K, Ishikawa N, Tanaka S, Tanaka F, Ohmiya Y and Hayashi Y. Experimental and numerical studies on fire whirls. In: Proceedings of the 6th Asia-Oceania symposium on fire science and technology, Daegu, Korea, March 17–20 2004. , London, UK: International Association for Fire Safety Science, 2004. Session A, Paper 2a-2, http://www.iafss.org/publications/aofst/6/2a-2/view/aofst_6-2a-2.pdf (2004, accessed 20 February 2017).
18.
ZhouKLiuNLozanoJSShanYYaoBSatohK. Effect of flow circulation on combustion dynamics of fire whirl. Proc Combust Inst2013; 34: 2617–2624.
19.
LeiJLiuNZhangLDengZAkafuahNKLiTSaitoKSatohK. Burning rates of liquid fuels in fire whirls. Combust Flame2012; 159: 2104–2114.
20.
ChuahKHKuwanaKSaitoKWilliamsFA. Inclined fire whirls. Proc Combust Inst2011; 33: 2417–2424.
21.
ZhouRWuZN. Fire whirls due to surrounding flame sources and the influence of the rotation speed on the flame height. J Fluid Mech2007; 583: 313–345.
22.
ZouGWChowWK. Generation of an internal fire whirl in an open roof vertical shaft model with a single corner gap. J Fire Sci2015; 33: 183–201.
23.
Iqbal N, Salley MH, Weerakkody S and NRC Project Manager. Fire Dynamics Tools (FDTs): quantitative fire hazard analysis methods for the U.S. nuclear regulatory commission fire protection inspection program. NUREG-1805, Division of System Safety and Analysis, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, Washington DC, December 2004.
24.
McGrattan K, Hostikka S, McDermott R, Floyd J, Weinschenk C and Overholt K. Fire dynamics simulator, user's guide. NIST Special Publication 1019, 6th ed. Espoo, Finland: National Institute of Standards and Technology, Gaithersburg, Maryland, USA, and VTT Technical Research Center of Finland, 2015.
25.
McGrattan K, Hostikka S, McDermott R, Floyd J, Weinschenk C and Overholt K. Fire dynamics simulator, technical reference guide, volume 1: mathematical model. Espoo, Finland: NIST Special Publication 1018-1, 6th ed. National Institute of Standards and Technology, Gaithersburg, Maryland, USA, and VTT Technical Research Center of Finland, 2015.
26.
ChowWK. Performance-based approach to determining fire safety provisions for buildings in the Asia-Oceania regions. Build Environ – Fifty Year Anniv Build Environ2015; 91: 127–137.
27.
Chow WK. Fire hazards of green buildings in the Asia-Oceania regions. Invited talk. In: Minisymposium MS94 – “Fire Safety Engineering and Mechanics” in Engineering Mechanics Institute Conference 2017, San Diego, California, USA, June 4–7 2017.
