The effect of solar reflectance,infrared emissivity,and thermal insulation of roofs on the annual energy consumption of single-family households in México
Restricted accessResearch articleFirst published online January, 2019
The effect of solar reflectance,infrared emissivity,and thermal insulation of roofs on the annual energy consumption of single-family households in México
Thermal building simulations were carried out for the climate conditions of 20 cities in México. We analyse the effects on energy consumption of variations in solar reflectance (SR), infrared emissivity (IE), and thermal insulation (TI) of a roof’s exterior surface. We quantify the maximum potential reduction in air conditioning annual electricity consumption and the most appropriate combination of optical properties to achieve this in every locality. We systematically varied the SR, IE, and TI of the exposed rooftop of a reference building. TI has the greatest energy-saving benefits when the optical properties of the roof are inadequate. The largest effects of SR and IE on energy consumption occur in countries with temperate climate dominated by energy requirements for cooling. In México, these cities are located in thermal zones 1 and 2, and it is within these zones that cool roof standards are recommended.
MarinoCMinichielloFBahnflethW. The influence of surface finishes on the energy demand of HVAC systems for existing buildings. Energ Build2015; 95: 70–79.
2.
De Brito FilhoJPHenriquezJCDutraC. Effects of coefficients of solar reflectivity and infrared emissivity on the temperature and heat flux of horizontal flat roofs of artificially conditioned nonresidential buildings. Energ Build2011; 43: 440–445.
3.
ShiZZhangX. Analyzing the effect of the longwave emissivity and solar reflectance of building envelopes on energy-saving in buildings in various climates. Sol Energ2011; 85: 28–37.
4.
AkbariHKonopackiSPomerantzM. Cooling energy savings potential of reflective roofs for residential and commercial buildings in the United States. Energy1999; 21: 391–407.
5.
SynnefaASantamourisMAkbariH. Estimating the effect of using cool coatings on energy loads and thermal comfort in residential building in various climatic conditions. Energ Build2007; 39: 1167–1174.
6.
AkbariHMenonSRosenfeldA. Global cooling: increasing world-wide urban albedos to offset CO2. Clim Change2009; 94: 275–286.
SantamourisM. Cooling the cities – a review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments. Sol Energ2014; 103: 682–703.
9.
PiselloALCotanaF. The thermal effect of an innovative cool roof on residential buildings in Italy: results from two years of continuous monitoring. Energ Build2014; 69: 154–164.
10.
TongaSLiaHZingreaKTWanaMPChangVWWongSKThian TohWBLeng LeeIY. Thermal performance of concrete-based roofs in tropical climate. Energ Build2014; 76: 392–401.
11.
JoJCarlsonJGoldenJBryanH. An integrated empirical and modeling methodology for analyzing solar reflective roof technologies on commercial buildings. Build Environ2010; 45: 453–460.
12.
SynnefaASaliariMSantamourisM. Experimental and numerical assessment of the impact of increased roof reflectance on a school building in Athens. Energ Build2012; 55: 7–15.
13.
CostanzoVEvolaGGaglianoAMarlettaLNoceraF. Study on the application of cool paintings for the passive cooling of existing buildings in Mediterranean climates. Adv Mech Eng2013; 5: 1–10.
14.
RomeoCZinziM. Impact of a cool roof application on the energy and comfort performance in an existing non-residential building. A Sicilian case study. Energ Build2013; 67: 647–657.
Lucero-Álvarez J, Martín-Domínguez IR, Rubín-Zacarías F, Ledezma-Gallegos A and Alarcón-Herrera MT. Experimental comparison of heat flow through concrete roofing flagstone with different coatings. In: Proceedings of Solar World Congress 2011, Kassel, Germany, August 28-September 2 2011, http://proceedings.ises.org/paper/swc2011/swc2011-0006-LuceroAlvarez.pdf (accessed 14 July 2017).
17.
BoixoSDiaz-VicenteMColmenarACastroM. Potential energy savings from cool roofs in Spain and Andalusia. Energy2012; 38: 425–438.
18.
DiasDMachadoJLealLMendesA. Impact of using cool paints on energy demand and thermal comfort of a residential building. Appl Therm Eng2014; 65: 273–281.
19.
BritoJPOliveiraTV. Thermal analysis of roofs with thermal insulation layer and reflective coatings in subtropical and equatorial climate regions in Brazil. Energ Build2014; 84: 466–474.
20.
Hernández-PérezIÁlvarezGXamánJZavala-GuillénIArceJSimáE. Thermal performance of reflective materials applied to exterior building components – a review. Energ Build2014; 80: 81–105.
21.
AkbariHLevinsonR. Evolution of cool-roof standards in the US. Adv Build Energ Res2008; 2: 1–32.
22.
AkbariHMatthewsHD. Global cooling updates: reflective roofs and pavements. Energ Build2012; 55: 2–6.
23.
SimpsonJRMcPhersonEG. The effects of roof albedo modification on cooling loads of scale model residences in Tucson, Arizona. Energ Build1997; 25: 127–137.
24.
ZinziMAgnoliS. Cool and green roofs. An energy and comfort comparison between passive cooling and mitigation urban heat island techniques for residential buildings in the Mediterranean region. Energ Build2012; 55: 66–76.
25.
GentleARAguilarJLCSmithGB. Optimized cool roofs: integrating albedo and thermal emittance with R-value. Sol Energ Mat Sol Cells2011; 95: 3207–3215.
26.
D’OrazioMDi PernaCDi GiuseppeEMorodoM. Thermal performance of an insulated roof with reflective insulation: field tests under hot climatic conditions. J Build Phys2013; 36: 229–246.
Oropeza-PerezIØstergaardPA. Energy saving potential of utilizing natural ventilation under warm conditions – a case study of México. Appl Energ2014; 130: 20–32.
29.
NMX-C-460-ONNCCE-2009. Industria de la construcción, aislamiento térmico-valor “R” para las envolventes de vivienda por zona térmica para la república mexicana, especificaciones y verificación, http://www.onncce.org.mx (accessed 25 April 2014).
GriegoDKrartiMHernández-GuerreroA. Optimization of energy efficiency and thermal comfort measures for residential buildings in Salamanca, México. Energ Build2012; 54: 540–549.
36.
Madsen JM. Modelling heat transfer in rooms using transfer function methods. MS Thesis, University of Wisconsin-Madison, Madison, WI, 1982.
37.
Rubín-Zacarías FR and Martín-Domínguez IR. Optimización de propiedades reflectivas de cool roofs usando microesferas poliméricas huecas. In: 13th international exhibition of coatings industry suppliers, Sao Paulo, Brazil, September 16-18, 2013, http://www.abrafati2017.com.br/2013/Dados/PDF/Paper_034.pdf (accessed 15 July 2017).
Lucero-AlvarezJMartín-DomínguezIR. The effects of roof and wall insulation on the energy costs of low income housing in Mexico. Sustainability2016; 8: 1–19.
