Development of design guidelines for thermo-active foundations

Abstract

Ground medium can be utilized as a direct energy source to heat and cool buildings. In particular, ground source heat pump systems take advantage of the year-round mild deep earth temperature without a significant reliance on any external energy sources. However, the high installation cost of ground source heat pumps associated with high drilling cost of vertical boreholes often make these systems less cost-effective compared to conventional heating and cooling systems. Thermo-active foundations can be a viable solution to reduce ground source heat pump high installation costs by embedding heat exchangers within building foundation structures. Compared to ground source heat pumps, only limited analyses and research studies have been reported for thermo-active foundations especially for the US climates. In particular, no specific design guidelines have been reported for thermo-active foundations especially for US climates. In this paper, a simplified design approach was developed and applied for specifying geothermal heat pump size and heat exchanger loop length to meet all or part of building heat and cooling thermal loads. The developed guidelines would thus provide a proper design guide for installation of thermo-active foundations for heating and cooling of both US residential and commercial buildings.

Keywords

Buildings Design guidelines Energy piles G-functions Heat-pumps Thermo-active foundations

Get full access to this article

View all access options for this article.

References

Fisher DE and Rees SJ. Modeling ground source heat pump systems in a building energy simulation program (ENERGYPLUS). In: Building simulation 2005, ninth international IBPSA conference, Montreal, Canada, August 15–18 2005; pp. 311–318.

Shonder JA and Hughes PJ. Increasing confidence in geothermal heat pump design methods. In: 2nd Stockton geothermal conference, Stockton New Jersey, USA, March 16–17 1998; pp. 41–57.

Chiasson

Yavuzturk

Johnson

Filburn

. Optimization of the ground thermal response in hybrid geothermal heat pump systems. ASHRAE Trans 2010; 116: 512–524.

Kavanaugh S. An instruction guide for using a design tool for vertical ground-coupled, groundwater and surface water heat pumps systems – ground source heat pump system designer. GshpCalc Version 5.0. Northport, AL: Energy Information Services, 2012.

ASHRAE. ASHRAE handbook: HVAC applications – chapter 32. Atlanta, GA: American Society for Heating, Refrigerating, and Air Conditioning Engineers Inc., 2007.

ASHRAE. ASHRAE handbook: HVAC systems and equipment – chapter 26. Atlanta, GA: American Society for Heating, Refrigerating, and Air Conditioning Engineers Inc., 2008.

Kavanaugh

Rafferty

. Ground source heat pumps – design of geothermal systems for commercial and institutional buildings, Atlanta, GA: ASHRAE, 1997.

Brandl

. Energy foundations and other thermo-active ground structures. Geotechnique 2006; 56: 81–122.

Laloui

Nuth

Vulliet

. Experimental and numerical investigations of the behaviour of a heat exchanger pile. Int J Numer Anal Meth Geomech 2006; 30: 763–781.

10.

Sekine

Ooka

Shiba

Yokoi

Hwang

. Development of a ground-source heat pump system with ground heat exchanger utilizing the cast-in-place concrete pile foundations of buildings. ASHRAE Trans 2007; 113: 741–753. .

11.

McCartney JS and Rosenberg JE. Impact of heat exchange on the axial capacity of thermo-active foundations. In: Proceedings of Geo-Frontiers 2011, ASCE, Dallas, Texas, USA, March 13–16 2011; pp. 488–498.

12.

Stewart MA and McCartney JS. Centrifuge modeling of soil-structure interaction in energy foundations. ASCE J Geotech Geo-environ Eng 2013; 140: 04013044-1–0401304411.

13.

Kaltreider

Krarti

McCartney

. Heat transfer analysis of thermo-active foundations. Energy Build 2015; 86: 492–501.

14.

Rouissi

Krarti

McCartney

. Analysis of thermo-active foundation using U-tube heat exchangers. ASME Solar Energy Eng J 2011; 134: 154–161.

15.

Lee

Kim

Leigh

. Thermal performance analysis of a ground-coupled heat pump integrated with building foundation in summer. Energy Build 2013; 59: 37–43.

16.

Bozis

Papakostas

Kyriakis

. On the evaluation of design parameters effects on the heat transfer efficiency of energy piles. Energy Build 2011; 43: 1020–1029.

17.

Abdelaziz SL, Olgun CG and Martin JR. Design and operational considerations of geothermal energy piles. In: Proceedings of Geo-Frontiers 2011, ASCE, Dallas, Texas, USA, March 13–16 2011; pp. 450–459.

18.

Patankar

. Numerical heat transfer and fluid flow. Series in Computational methods in mechanics and thermal science, 1st ed. Washington D.C.: Hemisphere, 1980.

19.

Kwag

Krarti

. Evaluation of thermoactive foundations for heating and cooling residential buildings. ASME Solar Energy Eng J 2016; 138: 87–99.

20.

Kwag BC and Krarti M. Development of a response factor model for thermo-active building foundation. In: ASME 2014 international mechanical engineering congress and exposition, Vol 6B, Tack 7-8, No. 36350, Montreal, Quebec, Canada, November 14–20 2014; pp. 350–363.

21.

Krarti

. Thermoactive foundations for sustainable buildings, ASME Press Monograph. New York, NY, USA: American Society for Mechanical Engineers, 2015.

22.

WaterFurnace Inc. Heat pump product catalog – Hydronic NSW, Hydronic NDW, www.waterfurnace.com/literature/envision/SC1007WN.pdf (accessed 2 July 2014).

23.

ANSI/ASHRAE/IESNA Standard 90.1-2004. Energy standard for buildings except low-rise residential buildings, Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2007.

24.

U.S. Department of Energy's Energy Efficiency & Renewable Energy, Residential and Commercial Prototype Building Models. www.energycodes.gov/development (accessed 2 July 2014).

25.

EnergyPlus. EnergyPlus engineering reference. Washington DC: Department of Energy, Energy Efficiency and Renewable Energy, Building Technologies Program, 2010.