A mobile indoor mapping system combined with infrared thermography was used for the acquisition of data needed for the quantification of heat loss through a building envelope by conduction; that is, temperature values and building geometry. The methodology presented orthothermograms to provide measurement of heat loss and thermographic images with geometric information. This way, not only the energy loss through the building envelope is provided, but also thermographic information regarding the existence of thermal pathologies, their location and their impact on the building can also be evaluated.
GrinzatoEVavilovVKauppinenT. Quantitative infrared thermography in buildings. Energ Build1998; 29: 1–9.
2.
RosinaESpodekJ. Using infrared thermography to detect moisture in historic masonry: a case study in Indiana. APT Bull2003; 34: 11–16.
3.
LiHGongGXuCSuHCaoZZhouMYuCWF. Thermal and humid environment and moisture condensation characteristics of cold surfaces. Ind Built Environ2014; 23: 474–484.
4.
AvdelidisNMoropoulouA. Applications of infrared thermography for the investigation of historic structures. J Cult Herit2004; 5: 119–127.
5.
TavukcuogluADuzgunesADemirciSCaner-SaltıkEN. The assessment of a roof drainage system for an historical building. Building Environ2007; 42: 2699–2709.
6.
BisonPGrinzatoE. IR thermography applied to the assessment of thermal conductivity of building materials. SPIE Defense, Security, and Sensing. Int Soc Opt Photon2010; 7661: 76610G–G-9.
7.
BarreiraEde FreitasVP. Evaluation of building materials using infrared thermography. Constr Build Mater2007; 21: 218–224.
8.
LagüelaSDíaz-VilariñoLArmestoJAriasP. Non-destructive approach for the generation and thermal characterization of an as-built BIM. Constr Build Mater2014; 51: 55–61.
9.
FokaidesPAKalogirouSA. Application of infrared thermography for the determination of the overall heat transfer coefficient (U-Value) in building envelopes. Appl Energ2011; 88: 4358–4365.
10.
MercuriFZammitUOraziNPaoloniSMarinelliMScudieriF. Active infrared thermography applied to the investigation of art and historic artefacts. J Therm Anal Calorimetr2011; 104: 475–485.
11.
VavilovVKauppinenTGrinzatoE. Thermal characterization of defects in building envelopes using long square pulse and slow thermal wave techniques. J Res Nondestr Eval1997; 9: 181–200.
12.
Kraus K. Advanced methods and applications. Vol. 2. Fundamentals and Estándar processes. Vol. 1. Institute for Photogrammetry Vienna University of Technology, Ferd Dummler Verlag Bonn. Bonn, Germany, 1993.
13.
LagüelaSDíaz-VilariñoLMartínezJArmestoJ. Automatic thermographic and RGB texture of as-built BIM for energy rehabilitation purposes. Automat Constr2013; 31: 230–240.
14.
Hoegner L and Stilla U. Automatic generation of façade textures from terrestrial thermal infrared image sequences. In: CNRS-ENSAM, Bordeaux (France), 7–11 July 2014.
15.
PrevitaliMBarazzettiLRedaelliVScaioniMRosinaE. Rigorous procedure for mapping thermal infrared images on three-dimensional models of building façades. J Appl Remot Sens2013; 7: 073503–073503.
16.
BorensteinJEverettHFengL. Where am I? Sensors and methods for mobile robot positioning: Vol. 119, Michigan, Ann Arbor: University of Michigan, 1996, pp. 27–27.
17.
RiveiroBMorerPAriasPDe ArteagaI. Terrestrial laser scanning and limit analysis of masonry arch bridges. Constr Build Mater2011; 25: 1726–1735.
18.
PuenteIGonzález-JorgeHMartínez-SánchezJAriasP. Review of mobile mapping and surveying technologies. Measurement2013; 46: 2127–2145.
19.
LagüelaSGonzález-JorgeHArmestoJHerráezJ. High performance grid for the metric calibration of thermographic cameras. Meas Sci Technol2012; 23: 015402–015402.
20.
TaylorTCounsellJGillS. Combining thermography and computer simulation to identify and assess insulation defects in the construction of building façades. Energ Build2014; 76: 130–142.
21.
ISO 6781:1983. Thermal insulation, qualitative detection of thermal irregularities in building envelopes, infrared method, Geneva: International Organization for Standardization, 1983.
22.
ShihTFaigW. A solution for space resection in closed form. Int Arch Photogramm Remot Sens1988; 27: 547–56.
Pierrot-DeseillignyMDe LucaLRemondinoF. Automated image-based procedures for accurate artifacts 3D modeling and orthoimage generation. Geoinform FCE CTU J2011; 6: 291–299.
25.
BarriosGHuelszGRojasJOchoaJMMarincicI. Envelope wall/roof thermal performance parameters for non air-conditioned buildings. Energ Build2012; 50: 120–127.
Liu L and Stamos I. Automatic 3D to 2D registration for the photorealistic rendering of urban scenes. In: Proceedings of the 2005 IEEE computer society conference on computer vision and pattern recognition, IEEE, San Diego, CA, December 2005; Vol. 2: pp.137–143.
28.
AsdrubaliFBaldinelliGBianchiF. A quantitative methodology to evaluate thermal bridges in buildings. Appl Energ2012; 97: 365–373.
29.
González-AguileraDRodriguez-GonzalvezPArmestoJLagüelaS. Novel approach to 3D thermography and energy efficiency evaluation. Energ Build2012; 54: 436–443.
