Fast Identification of Multiple Indoor Constant Contaminant Sources by Ideal Sensors: A Theoretical Model and Numerical Validation

Abstract

If hazardous contaminants are suddenly released indoors, quickly identifying the pollutants characteristics, such as the locations and emission rates, of the contaminant sources is critical for developing fast and effective response measures. This study presents a theoretical model for quickly identifying the locations and emission rates of multiple constant sources indoors using a single or limited number of ideal sensors. The model combines a linear programming model with an analytical expression of indoor contaminant dispersion that was presented in our previous study. Before the release of contaminants, only a limited number of time-consuming computational fluid dynamics (CFD) simulations need to be conducted to cover a large number of possible scenarios because of the analytical expression integrated into the model. After the release of contaminants, the model can be solved in real-time. Through case studies of sixteen contaminant release scenarios in a three-dimensional office, the effectiveness of the model was numerically demonstrated and validated. The results revealed that the identification accuracy of the presented model was closely related to the sensor layouts and the total sampling time, rather than the sampling interval.

Keywords

Source identification Contaminant source Indoor environment Computational fluid dynamics (CFD)Air distribution

Get full access to this article

View all access options for this article.

References

Alifanov

: Inverse Heat Transfer Problems. New York, Springer-Verlag, 1994.

Huang

Wang

: A three-dimensional inverse heat conduction problem in estimating surface heat flux by conjugate gradient method: Int J Heat Mass Tran 1999;42(18):3387–3403.

Hwang

Koerner

: Groundwater pollution source identification from limited monitoring well data: Part 1 — theory and feasibility: J Hazard Mater 1983;8(2):105–119.

Atmadja

Bagtzoglou

: State of the art report on mathematical methods for groundwater pollution source identification: Environ Forensics 2001;2(3):205–214.

Franco-Uría

López-Mateo

Roca

Fernández-Marcos

: Source identification of heavy metals in pastureland by multivariate analysis in NW Spain: J Hazard Mater 2009;165(1–3):1008–1015.

Zheng

Chen

: Back-calculation of the strength and location of hazardous materials releases using the pattern search method: J Hazard Mater 2010;183(1–3):474–481.

Annunzio

Young

Haupt

: Utilizing state estimation to determine the source location for a contaminant: Atmos Environ 2012;46:580–589.

Kovalets

Andronopoulos

Venetsanos

Bartzis

: Identification of strength and location of stationary point source of atmospheric pollutant in urban conditions using computational fluid dynamics model: Math Comput Simulat 2011;82(2):244–257.

Zhang

: Time-series numerical simulation of wind flow within urban canopy layer and its integration effect for prediction of pollutant concentration variation: Indoor Built Environ 2012;21(3):355–357.

10.

Liu

Zhai

: Inverse modeling methods for indoor airborne pollutant tracking: literature review and fundamentals: Indoor Air 2007;17(6):419–438.

11.

Sohn

Reynolds

Singh

Gadgil

: Rapidly locating and characterizing pollutant releases in buildings: J Air Waste Manage Assoc 2002;52(12):1422–1432.

12.

Liu

Zhai

: Prompt tracking of indoor airborne contaminant source location with probability-based inverse multi-zone modeling: Build Environ 2009;44(6):1135–1143.

13.

Vukovic

Srebric

: Application of neural networks trained with multizone models for fast detection of contaminant source position in buildings: ASHRAE Transact 2007;113(2):154–162.

14.

Bastani

Haghighat

Kozinski

: Contaminant source identification within a building: toward design of immune buildings: Build Environ 2012;51:320–329.

15.

Musser

: An analysis of combined CFD and multizone IAQ model assembly issues: ASHRAE Transact 2001;107(Part 1):371–382.

16.

Axley

: Multizone airflow modeling in buildings: history and theory: HVAC&R Res 2007;13(6):907–928.

17.

Wang

Chen

: Evaluation of some assumptions used in multizone airflow network models: Build Environ 2008;43(10):1671–1677.

18.

Zhang

Chen

: Identification of contaminant sources in enclosed environments by inverse CFD modeling: Indoor Air 2007;17(3):167–177.

19.

Zhang

Chen

: Identification of contaminant sources in enclosed spaces by a single sensor: Indoor Air 2007;17(6):439–449.

20.

Liu

Zhai

: Location identification for indoor Instantaneous point contaminant source by probability-based inverse computational fluid dynamics modeling: Indoor Air 2008;18(10):2–11.

21.

Zuo

Chen

: Real-time or faster-than-real-time simulation of airflow in buildings: Indoor Air 2009;19(1):33–44.

22.

Yang

Zhao

: Prediction of transient contaminant dispersion and ventilation performance using the concept of accessibility: Energ Build 2004;36(3):293–299.

23.

Zhao

: Accessibility: a new concept to evaluate ventilation performance in a finite period of time: Indoor Built Environ 2004;13(4):287–293.

24.

Patankar

: Numerical Heat Transfer and Fluid Flow. Washington, DC, Hemisphere Publishing Corp., 1980.

25.

Nielsen

: Computational fluid dynamics and room air movement: Indoor Air 2004;14(s7):134–143.

26.

Chen

: Ventilation performance prediction for buildings: a method overview and recent applications: Build Environ 2009;44(4):848–858.

27.

28.

Chen

: A zero-equation turbulence model for indoor airflow simulation: Energ Buildings 1998;28(2):137–144.

29.

Zhang

Zhai

Chen

: Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: Part-2: comparison with experimental data from literature: HVAC&R Res 2007;13(6):871–886.