The purpose of this paper is to provide examples of strategies and procedures for remediation of buildings affected by toxic moulds. Four case studies are included in the paper. Moisture and inadequate ventilation are the keys to proliferation of toxic moulds and dispersion of spores in air. Prevention should always be the main objectives for any environmental management plan or service maintenance of a building. The management and remediation plan should include an adequate control of moisture, damp and ventilation in the building. The most effective strategy for remediating mould problems is by source control, preventing or limiting the generation of moulds, and the other is to remove the sources. There should be a detailed study to identify the sources of mould problems. The remediation could involve mothballing of a building to rectify defects including leaks and removal of damp materials; venting of underfloor or wall cavities and to improve the general airflow in the building. Remediation may involve vacuuming to remove spores in air and mould from surfaces. Other techniques include heat treatment, steam cleaning, biocides treatment, fumigation and UV treatment.
Yu CWF , Kim JT: Building pathology, investigation of sick buildings - VOC emissions: Indoor Built Environ2010;19(1):30-39.
2.
Singh J., Yu CWF, Kim JT: Building pathology, investigation of sick buildings - toxic moulds : Indoor Built Environ2010;19(1):40-47.
3.
Lange JH: Mould: the next environmental industry: Indoor Built Environ2004;13: 165-167.
4.
Moon HJ, Yoon YR: Investigation of physical characteristics of houses and occupants’ behavioural factors for mould infestation in residential buildings: Indoor Built Environ2010;19(1):57-64.
5.
Wong LT, Chan WY, Mui KW, Hui PS: An assessment of airborne fungi exposure risk level in air-conditioned offices : Indoor Built Environ2009;18(6):553-561.
6.
Wong LT, Mui KW, Hui PS, Chan WY, Law AKY: Thermal environmental interferences with airborne bacteria and fungi levels in air-conditioned offices: Indoor Built Environ2008;17(2):122-127.
7.
Oreszczyn T. , Ridley I., Hong SH, Wilkinson P.: Mould and winter indoor relative humidity in low income households in England: Indoor Built Environ2006;15(2):125-135.
8.
Singh J.: Toxic moulds and indoor air quality: Indoor Built Environ2005;14(3-4): 229-234.
9.
Viegas C., Alves C., Carolino E., Rosado L., Santos CS: Prevalence of fungi in indoor air with reference to gymnasiums with swimming pools: Indoor Built Environ2010;19(5): 555-561.
10.
Mussalo-Rauhamaa H., Nikulin M., KoukilaKahkölä P., Hintikka EL, Malmberg M., Haahtela T.: Health effects of residents exposed to stachybotrys in water-damaged houses in Finland: Indoor Built Environ2010;19(4): 476-495.
11.
Zorman T., Jeršek B.: Assessment of bioaerosol concentrations in different indoor environments : Indoor Built Environ2008;17(2): 155-163.
12.
Lugauskas A. , Jaskelevičius B.: Micromycetes hazardous to human health in buildings of various age and use in Vilnius: Indoor Built Environ2007;16(4):349-357.
13.
ACGIH (American Conference of Government Industrial Hygienists): Guidelines for the Assessment of Bioaerosols in the Indoor Environment. Cincinnati, OH, ACGIH, 1989.
14.
ACGIH (American Conference of Government Industrial Hygienists): Bioaerosols - Assessment and Control . Cincinnati, OH, ACGIH, 1999.
15.
ARC (American Red Cross) and FEMA (Federal Emergency Management Agency): Repairing your flooded home . ARC Publication4476; FEMA PublicationL-198, August 1992, Washington, DC. Available at: http://www.redcross.org/services/disaster/afterdis/repfhm.pdf . (accessed April 21, 2010)
16.
CMHC (Canadian Mortgage and Housing Corporation) : Clean-up Procedures for Mold in Houses. Ottawa, Canada, CMHC, 1993.
17.
Canadian National Toxic Mold Centre - Guidelines and Standards: Guidelines: What to do about molds: Available at: F:\CANADIANNATIONALTOXICMOLDCENTRE-GUIDELINES-STANDARDS.mht (accessed April 21, 2010).
18.
New York City Department of Health and Mental Hygiene: Guidelines on Assessment and Remediation of Fungi in Indoor Environments. New York, NY, New York City Department of Health, 2008.
19.
New York City Department of Health and Mental Hygiene: Assessment and Remediation of Stachybotrys atra in Indoor Environments. New York, NY, New York City Department of Health, 1993.
20.
Morley PR: Microbiological contamination in buildings: precautions against remediation : in Proceedings of IAQ’92, Atlanta, GA, ASHRAE, 1992.
21.
US EPA (United States Environmental Protection Agency): Mold Remediation in Schools and Commercial Buildings . Washington, DC, US EPA, 2001.
22.
Minnesota Department of Health (MDH): Recommended best practices for mold investigations in Minnesota schools . November 2001. MDH, Environmental Health Division, Indoor Air Unit, PO Box 64975, St Paul, MN 55164-0975.
23.
World Health Organisation (WHO): Indoor Air Quality: Biological Contaminants. WHO regional publications European Series31. Geneva, WHO.
24.
Health Canada: Fungal Contamination in Buildings: A Guide to Recognition and Management. Ottawa, ON, Health Canada, 1995.
25.
Flannigan B, Morley P (eds): Control of Moisture Problems Affecting Biological Indoor Air Quality, ISIAQ Guidelines, TFI-1996. Milan, Italy, International Society of Indoor Air Quality and Climate, 1996.
26.
Hunter CA, Bravery AF: Requirements for growth and control of surface moulds in dwellings : in Flannigan B (ed.): Airborne Deteriogens and Pathogens: Kew, Surrey, UK, Biodeterioration Society , 1989 , pp. 174-182.
27.
Hunter C.: Surface Condensation and Mould Growth in Traditionally-built Dwellings: BRE Digest 297. London, CRC Ltd , 1987.
28.
Singh J.: Dry rot and other wood destroying fungi: their occurrence, biology and pathology and control: Indoor Built Environ1999 ;8:3-20.
29.
Singh J.: Structural failures of timber in buildings: their causes, non-destructive inspection, monitoring and environmental control: in Drdack M (ed.): Lessons from Structural Failures: Prague , Milos Dydsaky, Telco, 1993; Vol. 3. pp. 45-59.
30.
WHO (World Health Organisation) in Europe: WHO guidelines for indoor air quality: dampness and mould. WHO Regional Office for Europe, Copenhagen, Denmark , 2009. Available at: www.euro.who.int/document/E92645.pdf (accessed April 21, 2010).
31.
Building Research Establishment (BRE): Thermal insulation: avoiding the risks: BRE guide to good practice building construction, BR143, Building Research Establishment Report , HMSO, 1989 (Reprinted 1992).
32.
Cibse Tm26: 2000: Hygiene Maintenance of Office Ventilation Ductwork, London, CIBSE (Chartered Institute of Building Services Engineers).
33.
Ashrae 62-1990: Ventilation for Preservation of Occupants’ Health, Safety and Well-being - Specify Indoor Air Quality, Minimum Ventilation Rates Acceptable for Human Occupants and will not Impair Health. Atlanta, GA, ASHRAE, 1990.
34.
Singh J.: Occupational exposure to moulds in buildings: Indoor Built Environ2001;10: 172-178.
35.
Li C., Deng B., Kim CN: Simulations to determine the disinfection efficiency of supplementary UV light devices in a ventilated hospital isolation room: Indoor Built Environ2010;19(1):48-56.
36.
Wang B., Mortazavi R., Haghighat F.: Evaluation of modeling and measurement techniques of ultraviolet germicidal irradiation effectiveness - towards the design of immune buildings : Indoor Built Environ2009; 18(2):101-112.
37.
Horner W., Morley PR, Ligman BK: How quickly must Gypsum board and ceiling tile be dried to preclude mold growth after a water accident?: in Proceedings of IAQ 2001, Atlanta, GA, American Society of Heating Refrigeration and Air Conditioning Engineers, 2001.
38.
Hunter CA, Hull AV, Higham DF, Grimes CP, Lea RG: Fungi and bacteria: in Berry et al. (eds): Indoor Air Quality in Homes: The Building Research Establishment Indoor Environment Study, Part 1, London, Construction Research Communication, 1996, pp. 97-115.
39.
Nathanson T.: Indoor Air Quality in Office Buildings - A Technical Guide. Canada , Ministry of Supply and Services, 1995.
40.
Quezada NV, Lange JH: Final clearance criteria after mould remediation: Indoor Built Environ2004;13:199-203.
41.
Lange JH, Grad JW, Lange PA, Thomulka KW, Dunmyre G., Lee RJ, Richardson CF, Blumershire RVH: Asbestos abatement of ceiling panels and mold growth in a public school building after water damage: a case study: Fresenius Environ Bull1993;2:13-18.
42.
Lange JH: A statistical evaluation of asbestos air-concentrations: Indoor Built Environ1999;8:293-303.
43.
Moon HJ: Uncertainty analysis in mould spore transportation and its application in an existing building: Indoor Built Environ2010; 19(3):355-365.
