Analysis and Design of a New Roof Monitor for Day and Night Illumination of a Large Volume Room

Abstract

The Illuminating Engineering Society of North America (IESNA) Lighting Handbook recommends illuminance criteria for specific applications to raise the ``minimum standard of care'' required of lighting design to meet human, economic environmental, and architectural concerns. Specific criteria for daylighting of auditoriums (i.e., large rooms) focus on the importance of daylighting integration, control and flexibility, illuminance levels, light distribution, color appearance, and glare. A new skylight design for day and night illumination of a large volume room is proposed. The feasibility of this unique design uses clerestory windows, also known as a roof monitor, and an outdoor lighting array. The design illuminates a room 100-feet wide, 100-feet long, and 75-feet high, located at 40°-north latitude. Comparisons have been made to flat skylight wells for the same volume. The demonstrated design meets lighting criteria that satisfy IESNA standards for day and night to play basketball, a task that requires low contrast and involves small sized objects, like a basketball. The design has been tested with AGI32 software created by Lighting Analysts, Inc of Littleton, Colorado. Results show the new skylight meets IESNA criteria F (for tasks like basketball) during the daytime with an assist by external lighting as the setting sun reduces the daylight.

Keywords

New skylight Day lighting Large volume space IESNA standards Illumination Integration

Get full access to this article

View all access options for this article.

References

Parent MD , Murdoch JB : The expansion of the zonal cavity method of interior lighting design to include skylights: J Illumin Engineer Soc 1988;17:141-173.

Boubekri M. , Anninos W. : Skylight wells: a finite-element approach to analysis of efficiency: Lighting Res Technol 1995; 27(3):153-159.

Laouadi A. , Atif M. : Predicting optical and thermal characteristics of transparent single-glazed domed skylights ASHRAE Trans 1999;105:325-333.

Tsangrassoulis A. , Santamouris M. : A Method to estimate the daylight efficiency of round skylights: Energy Buildings 2000;32(1): 41-45.

Serres A. , Murdoch J. : On the efficiency of skylight wells: J Illumin Engineer Soc 1990; 19(1):73-86.

Murdoch JB : Illuminating engineering-from Edison's lamp to the laser, New York, Macmillan Publishing Company, 1985, p. 260.

Heschong L. , McHugh J. : Skylights: calculating illumination levels and energy impacts: J Illumin Engineer Soc 2000;29(1):90-98.

McCluney R. : SKYSIZE - A simple procedure for sizing skylights based upon statistical illumination performance: Energy Buildings 1983;6(3):19-39.

Laouadi A. , Atif M. : Daylight availability in top-lit Atria: prediction of skylight transmittance and daylight factor: Lighting Res Technol 2000;32(4):175-186.

10.

Laouadi A. , Atif M. , Galasiu A. : Methodology towards developing skylight design tools for thermal and energy performance of Atriums in cold climates: Building Environ 2003; 38(1):117-127.

11.

Murdoch JB : Illuminating Engineering from Edison's Lamp to the Laser, New York, Macmillan Publishing Company, 1985, p. 350.

12.

Fuller M. : Roof Monitors: Daylighting Geometry and Performance: in Proc 9th National Passive Solar Conference, Columbus Ohio . September 1984, pp. 286-291.

13.

Egan M. , Olgyay V. : Architectural Lighting, 2nd edn, New York, McGraw-Hill, 2002, p. 415.