Sorption Isotherms of Acetone on Various Building Materials

Abstract

The physical modelling of Indoor Air Quality (IAQ) suf fers a lack of sorption data for the most common Volatile Organic Compounds (VOC) on building materials. This paper deals with an experimental facility that aimed to provide the sorption isotherms of gaseous contaminants on various materials. It was used to determine the sorp tion isotherms of acetone on chipboard, acrylic paint, and the gypsum core of commercially available gypsum board. After a brief introduction to fundamental princi ples of sorption, the experimental device is presented in detail. The results are reported and discussed, emphasis ing the description of the isotherm shapes and the possi ble partial reversibility of the sorption phenomenon for porous materials. The resulting curves are clearly non linear when dealing with gypsum and chipboard. More over, the sorption isotherms of acetone on gypsum were found to be different whether they were determined in the directions of increasing or decreasing concentra tions. Many questions remain unresolved about the phy sico-chemical processes involved, the sorption data to be considered for the purposes of IAQ modelling, and the way to account for the observed phenomenon when modelling the sorption/diffusion contaminant transport in building materials. — Copyright©2002 S. KargerAG, Basel

Keywords

Acetone Sorption Isotherm Emission Sink effect Chipboard Acrylic paint Gypsum

Get full access to this article

View all access options for this article.

References

Guo Z. , Fortmann R. , Marfiak S. , Tichenor B. , Sparks L. , Chang J. , Mason M. : Modeling the VOC emissions from indoor latex paint applied to gypsum board . Indoor Air '96 1996;1: 987-992.

Colombo A. , De Bortoli M. , Knöppel H. , Pecchio E. , Vissers H. : Adsorption of selected volatile organic compounds on a carpet, a wall coating, and a gypsum board in a test chamber. Indoor Air 1993;3:276-282.

Clausen PA , Wolkoff P. , Holst E. , Nielsen PA : Long-term emission of volatile organic compounds from waterborne paints - methods of comparison. Indoor Air 1991;4:562-576.

Bluyssen PM , Cornelissen Hjm , Hoogeveen AW , Wouda P. , Van der Wal JF : The effect of temperature on the chemical and sensory emission of indoor materials . Indoor Air '96 1996 ;3: 619-624.

Gunnarsen L. : The influence of area-specific ventilation rate on the emissions from construction products. Indoor Air 1997;7:116-120.

Haghighat F. , De Bellis L. : Material emission rates: Literature review, and the impact of indoor air temperature and relative humidity. Building Environ 1998;33:261-277.

Zhang Y. , Haghighat F. : The impact of surface air movement on material emissions. Building Environ 1997;32:551-556.

Tiffonnet AL : Contribution à l'analyse de la qualité de l'air intérieur: Influence des transports de composés organiques volatils (COV) entre les parois et l'ambiance ; doctoral thesis, University of La Rochelle, 2000.

Meininghaus R. , Gunnarsen L. , Knudsen HN : Diffusion and sorption of volatile organic compounds in building materials - impact on indoor air quality. Environ Sci Technol 2000;34: 3101-3108.

10.

Axley JW : Reversible sorption modeling for multi-zone contaminant dispersal analysis . Proceedings of Building Simulation, Nice-Sophia Antipolis, 1991.

11.

Neretnieks I. , Christiansson J. , Romero L. , Dagerholt L. , Tu JW : Modeling of emission and re-emission of volatile organic compounds from building materials with indoor air applications. Indoor Air 1993;3:2-11.

12.

Little JC , Hodgson AT , Gadgil A. : Modeling emissions of volatile organic compounds from new carpets . Atmos Environ 1994;28:227-234.

13.

Helh O. , Horn W. , Seifert B. : Numerical simulation of VOC emission rates from building products based on physical processes. Indoor Air '99 1999 ;5:217-222.

14.

Silberstein S. : A Gypsum Wallboard Formaldehyde Sorption Model. Gaithersbourg, USA, National Institute of Standards and Technology, 1989, No NISTIR 89-4028.

15.

Kephalopoulos S. , Knoeppel H. , De Bortoli M. : 'Testing of sorption and desorption of selected VOC on/from indoor materials. Indoor Air '96 1996;2:61-66.

16.

Atkins PW : Physical Chemistry, ed 4. Oxford , Oxford University Press, 1990.

17.

Masel RI : Principles of Adsorption and Reaction on Solid Surfaces. New York, Wiley, 1996.

18.

Ruthven DM : Principles of Adsorption and Adsorption Processes. New York, Wiley, 1984.

19.

Borrazzo JE , Davidson CI , Andelman JB : Sorption of organic vapors to indoor surfaces of synthetic and natural fibrous materials. Indoor Air '90 1990;3:617-622.

20.

Borrazzo JE , Davidson CI , Andelman JB : Small closed-chamber measurements for the uptake of trichloroethylene and ethanol vapors by fibrous surfaces, Pittsburg, USA, Draft, ASTM Symposium on Modeling of Indoor Air Quality and Exposure, 1992.

21.

Lin TF , Nazaroff WW : Transport and sorption of water vapor in activated carbon. J Environ Engineering , ASCE 1996;122:176-182.

22.

Lin TF , Little JC , Nazaroff WW : Transport and sorption of organic gases in activated carbon. J Environ Engineering , ASCE 1996;122: 169-175.

23.

Lin TF , Little JC , Nazaroff WW : Transport and sorption of VOCs and water vapor within dry soil grains . Environ Sci Technol 1994;28: 322-330.

24.

Le Cloirec P. : Les composés organiques volatils (COV) dans l'environnement. Paris, Lavoisier TEC & DOC, 1998.

25.

Treybal RE : Mass-Transfer Operations. Paris, Mc Graw-Hill, 1981.

26.

Tiffonnet AL , Blondeau P. , Allard F. : Experimental characterisation of sorption phenomena of VOCs on building materials . Proceedings of the 2nd European Conference on Energy Performance and Indoor Climate in Buildings and 3rd International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings conferences , Lyon , November 19-21, 1998, vol 1, pp 13-18.