A simplified indoor air quality (IAQ) model has been applied to predict IAQ in an Australian house, using envi ronmental chamber measurements of source strengths, house ventilation and room size. Total volatile organic compounds (TVOCS) was used as the model pollutant in this study. The validity of the IAQ model was initially assessed by comparing model predictions with mea surements in the house over a period of time. The root mean square error between the measured and predicted values was 0.039. This model explains 57% of the poten tial for error. The TVOC concentrations measured in the conventional house ranged from 60 to 162 μg.m-3 . These values are much lower than some published val ues (0.48-31.7 mg.m-3) for new houses in Scandinavian countries and in the USA. The low TVOC concentrations obtained in this study probably result from the high ven tilation rates in this conventional house and the use of low TVOC emission materials.
COST Project 613, Rep No 8: Guideline for the characterisation of volatile organic compounds emitted from indoor materials and projects using small test chambers. Commission of the European Communities, EUR 13593 EN, Luxembourg, 1991.
2.
Tichenor BA, Sparks LE, Jackson MD: Evaluation of perchloroethylene emissions from dry cleaned fabrics. EPA-600/2-88-061 (NTIS No PB 89-118681). US Environmental Protection Agency , Research Triangle Park, 1988.
3.
Molhave L., Dueholm S., Jensen LK: Assessment of exposures and health risks related to formaldehyde emissions from furniture: A case study. Indoor Air1995 ;5:104-119.
4.
Aikivuori H., Aikivuori A., Hekkala E-L., Anttonen H., Pyy L.: Calculation model for emissions of combined construction materials; in Woods JE, Grimsrud DT, Boschi N (eds): Proceedings of Healthy Buildings/IAQ '97, Global Issues and Regional Solutions . Washington, Healthy Buildings/IAQ '97 Committee, 1997, vol 3, pp 581-585.
5.
Anttonen H., Mielonen P., Pyy L., Aikivuori A., Aikivuori H.: Modeling of the emissions of construction materials; in Woods JE, Grimsrud DT, Boschi N (eds): Proceedings of Healthy Buildings/ IAQ '97, Global Issues and Regional Solutions. Washington, Healthy Buildings/IAQ '97 Committee , 1997, vol 3, pp 575-579.
6.
Tichenor BA, Guo Z., Sparks LE: Fundamental mass transfer models for indoor air pollution sources ; in Saarela K, Kalliokoski P, Seppanen O (eds): Indoor Air '93, 6th Int Confon Indoor Air Quality and Climate, Helsinki, 19963, vol 2, pp 377-382.
7.
Sparks LE, Tichenor BA, Chang J., Guo Z.: Gas-phase mass transfer model for predicting volatile organic compounds (VOC) emission rates from indoor pollutant sources. Indoor Air1996;6:31-40.
8.
Dunn JE, Tichenor BA: Compensating for sink effects in emissions test chambers by mathematical modeling . Atmos Environ1988;22: 885-894.
9.
Sollinger S. , Levsen K., Wunsch G.: Indoor air pollution by organic emissions from textile floor coverings: Climate chamber studies under dynamic conditions . Atmos Environ1993 ; 27B:183-192.
10.
Little JC, Hodgson AT, Gadgil AJ: Modeling emissions of volatile organic compounds from new carpets . Atmos Environ1994 ;28:227-234.
11.
Matthews TG , Hawthorne AR, Thompson CV: Formaldehyde sorption and desorption characteristics of gypsum wallboard. Environ Sci Technol1987 ;21:629-634.
12.
Wilkes C., Koontz M., Ryan M., Cinalli C.: Estimation of emission profiles for interior latex paints; in Yoshizawa S, Kimura K, Ikeda K, Tanabe S, Iwata T (eds): Indoor Air '96, 7th Int Conf on Indoor Air Quality and Climate, Nagoya, 1996 , vol 2, pp 55-60.
13.
Chang Jcs, Tichenor BA, Guo Z., Krebs KA: Substrate effects on VOC emissions from a latex paint. Indoor Air1997;7:241-247.
14.
Guo H., Murray F., Maybury K.: Emissions of volatile organic compounds from paints. 1 st Int Symp on Issues in Environmental Pollution (IEP' 98), Denver, 1998, 2.24.
15.
Guo H., Murray F., Wilkinson S.: Evaluation of total volatile organic compound emissions from adhesives based on chamber tests. JAir Waste Manag Assoc2000;50:199-206.
16.
Sexton K., Hayward SB: Source apportionment of indoor air pollution. Atmos Environ1987; 21:407-418.
17.
Sparks LE, Jackson M., Tichenor B., White J., Dorsey J., Stieber R.: An integrated approach to research on the impact of sources on indoor air quality: in Walkinshaw D (ed): Indoor Air '90, Proc Conf on Indoor Air Quality and Climate, Toronto, 1990, vol 4, pp 219-224.
18.
Molhave L., Sparks LE, Wolkoff P., Clausen PA, Nielsen PA, Bergso NC: The Danish twin apartment study. Part II: Mathematical modelling of the relative strength of sources of indoor air pollution. Indoor Air1996;6:18-30.
19.
Silberstein S., Grot RA, Kunimichi I., Mulligan JL: Validation of models for predicting formaldehyde concentrations in residences due to pressed-wood products. J Air Pollut Control Assoc1988;38:1403-1411.
20.
Nazaroff WW , Cass GR: Mass-transport aspects of pollutant removal at indoor surfaces. Environ Int1989;15:567-584.
21.
Axley JW: Adsorption modelling for building contaminant dispersal analysis. Indoor Air1991;2:147-171.
22.
Axley JW: Modeling sorption transport in rooms and sorption filtration systems for building air quality analysis. Indoor Air1993 ;3:298-309.
23.
Axley JW: Integrated models of gas-phase air cleaning devices and multizone building systems. Proc 2nd Int Conf on IAQ, Ventilation and Energy Conservation in Buildings, Montreal, May 1995. Montreal, Concordia University, 1995.
24.
Chang Jcs, Guo Z.: Modeling of the fast organic emissions from a wood-finishing product: Floor wax. Atmos Environ1992;26A: 2365-2370.
25.
Neretnieks I. , Christiansson J., Romero L., Dagerholt L., Yu J.: Modelling of emission and re-emission of volatile organic compounds from building materials with indoor air applications . Indoor Air1993;3:2-11.
26.
Dunn JE: Models and statistical methods for gaseous emission testing of finite sources in well-mixed chambers. Atmos Environ1987 ;21: 425-430.
27.
Larsen A., Funch LW: VOC emissions from solid wood and wood-based products; in Woods JE, Grimsrud DT, Boschi N (eds): Proceedings of Healthy Buildings/IAQ '97, Global Issues and Regional Solutions. Washington, Healthy Buildings/IAQ '97 Committee, 1997, vol 3, pp 611-616.
28.
Sanchez DC, Mason M., Norris C.: Methods and results of characterisation of organic emissions from indoor materials . Atmos Environ1987; 21:337-345.
29.
Brown SK, Sim MR, Abramson MJ, Gray CN: Concentrations of volatile organic compounds in indoor air: A review . Indoor Air1994;4: 123-134.
30.
Reindl DT: Estimating ventilation rates using dynamic CO2 measurements ; in Woods JE, Grimsrud DT, Boschi N (eds): Proceedings of Healthy Buildings/IAQ '97, Global Issues and Regional Solutions . Washington, Healthy Buildings/IAQ'97 Committee, 1997, vol 1, pp 507-512.
31.
Feher TR, Ambs LL: The use of CO2 readings with fixed ventilation to reduce energy savings with demand-controlled ventilation; in Woods JE, Grimsrud DT, Boschi N (eds): Proceedings of Healthy Buildings/IAQ '97, Global Issues and Regional Solutions. Washington, Healthy Buildings/IAQ '97 Committee , 1997, vol 1, Washington DC, vol 1, pp 93-98.
32.
MacCurveFit, version 1.1, Kevin Ranger Software, Mt Waverley, 1995.
33.
Fletcher R.: Practical Methods of Optimization. Auckland, Wiley & Sons, 1980, vol 1: Unconstrained Optimization.
34.
Serber GA, Wild CJ: Non-Linear Regression. Wiley Series in Probability and Mathcmatical Series . Auckland, Wiley & Sons , 1989, pp 409-412.
35.
Levsen K., Sollinger S.: Textile floor coverings as sinks for indoor air pollutants; in Saarela K, Kalliokoski P , Seppanen O (eds): Indoor Air '93, Proc 6th Int Conf on Indoor Air Quality and Climate, Helsinki, 1993 , vol 2, pp 395-400.
36.
Colombo A., De Bortoli M., Knoppel H., Pecchio E., Vissers H.: Vapour deposition of selected VOCs on indoor surface materials in test chambers ; in Saarela K, Kalliokoski P, Seppänen O (eds): Indoor Air '93, Proc 6th Int Conf on Indoor Air Quality and Climate, Helsinki , 1993, vol 2, pp 407-412.
37.
Jorgensen RB , Knudsen HN, Fanger PO: The influence on indoor air quality of adsorption and desorption of organic compounds on materials ; in Saarela K, Kalliokoski P, Seppänen O (eds): Indoor Air '93, Proc 6th Int Conf on Indoor Air Quality and Climate, Helsinki , 1993, vol 2, pp 383-388.
38.
Stunder M., Sethu Raman S: A statistical evaluation and comparison of coast point source dispersion models . Atmos Environ1986;20:301-315.
39.
Hanna SR: Air quality model evaluation and uncertainty. J Air Pollut Control Assoc1988; 38:406.
40.
Rothweiler H., Wager PA, Schlatter C.: Volatile organic compounds and some very volatile organic compounds in new and recently renovated buildings in Switzerland . Atmos Environ1992;26A:2219-2225.
41.
Ekberg LE: Volatile organic compounds in of fice buildings. Atmos Environ1994;28:3571-3575.
42.
Molhave L.: Indoor air pollution due to building materials. Proc 1st Int Indoor Climate Symp. Copenhagen, Danish Building Research Institute, 1979, pp 89-104.
43.
De Bortoli M. , Knoppel H., Pecchio E., Peil A., Rogora L., Schauenburg H., Schlitt H., Vissers H.: Measurements of indoor air quality and comparison with ambient air. Commission of the European Communities , Report EUR 9656. Brussels, 1985 .
44.
Wallace L., Pellizzari E., Wendel C.: Total organic concentrations in 2500 personal indoor and outdoor samples collected in the US EPA TEAM studies; in Walkinshaw D (ed): Indoor Air '90, 5th Int Conf Indoor Air Quality and Climate, Toronto, 1990, vol 2, pp 639-644.
45.
Biggs KL, Bennie ID, Mitchell, D.: Air permeability of some Australian houses. Build Environ1986 ;21:89-96.
46.
Biggs KL, Bennie ID: Ventilation studies of some Australian houses. Aust Refrig Air Cond Heating1988;42:15-21.
47.
Brown SK: Indoor Air Quality. Australia: State of the Environmental Technical Paper Series (Atmosphere). Canberra, Department of the Environment, Sport and Territories, 1997 .
48.
Berglund B. , Johansson I., Lindvall T.: Volatile organic compounds from used building materials in a simulated climate chamber study. Environ Int1989;15:383-387.
