A parametric study of a multistage magnetic liquid seal (MMLS) is carried out on a chosen diester based MMLS. A general computer programme is developed to study the various performance parameters of such a seal. Based on the study, certain conclusions are drawn regarding the choice of magnet and pole piece materials, and the focusing structure of the seal.
Get full access to this article
View all access options for this article.
References
1.
AvaramchukA.Z., KalinkinA.K., MikhalevY.O., OvlovV. and SigovA.P., Vacuum tight rotating inlet with a magnetic fluid seals, Ivanov Institute Report, No. 3 (1975) pp. 191–192.
2.
BaileyR.L., The design and operation of magnetic liquid shafts, in: Thermomechanics of Magnetic Fluids, Ed. BerkovksyB. (Hemisphere, Washington, DC, 1977).
3.
PerryM.P. and JonesT.B., Dynamic loading of a single stage ferromagnetic liquid seals, J. Appl. Phys.49A (1978).
4.
WilliamsR.A. and MalskyH., Some experience using a ferrofluid seal against a liquid, IEEE Trans.MAG-16 (1980) 379.
5.
RajK., StahlP. and BottenbergW., Magnetic fluid seals for special applications, ASLE Preprint No. 79-AM-5B-3 (1979).
6.
RakhubaV.K., SamoilovV.B. and ChernobaiV.A., Dynamics of high speed magnetic liquid seals, J. Magn. Magn. Mater.39 (1983) 152.
7.
OzakiK. and FujiwaraT., An experimental study of high speed single stage magnetic fluid seals, J. Magn. Magn. Mater.65 (1987) 382.
8.
FertmanV.E., NovikovV.A. and SinitsynA.K., Numerical study of the hydrodynamics of high speed magnetic fluid seals, J. Magn. Magn. Mater.39 (1983) 133.
9.
SarmaS.S., StahlP. and WardA., Magnetic field analysis of ferrofluidic seals for optimum design, J. Appl. Phys.55 (1984) 2595.
10.
AntonI., Sabata DeI., VekasL., PotenczI. and SuciuE., Magnetic fluid seals: Some design problem and applications, J. Magn. Magn. Mater.65 (1987) 379.
11.
TaketomiS., Motion of ferrite particles under a high gradient magnetic field in a magnetic fluid shaft seals, Jpn. J. Appl. Phys.19 (1980) 1929.
12.
TaketomiS., Study of magnetic fluid shaft seals: Analysis of multistage effects and test of long time driving endurance, Preprint of Jpn. Soc. Mech. Eng. No. 820-6 (1982) 140.
13.
MaynardC.A., Analysis and design of permanent magnet assemblies, Machine Design (1957) pp. 122–140.
