Shear Strength Criteria and Related Tests for Brick Masonry

Bernardini A. , Modena C. and Vescovi U. (1982) “An anisotropic biaxial failure criterion for hollow brick masonry,” The Int. J. of Masonry Construction 2 (4), 165–171.

Chinwah J.C.G. (1972) “Shear resistance of brick walls,” PhD Thesis, University of London.

Dialer C. (1991) “Some remarks on the strength and deformation behaviour of shear stressed masonry panels under static monotonic loading,” Proc. 9th Int. Brick/Block Masonry Conference, Berlin 276–282.

Drysdale R.G. and Hamid A.A. (1982) “Tensile strength of brick masonry,” The Int. J. of Masonry Construction 2(4), 172–178.

Hendry A.W. (1978) “A note on the strength of brickwork in combined racking shear and compression,” Proc. B. Ceram. Soc. No. 27, 47–52.

Henry A.W. and Sinha B.P. (1971) “Shear tests on full-scale single-storey brickwork structures subjected to precompression,” Civil Eng. and Public Works Review 66, 1339–1344.

Jiang C.-H. and Xiao X.-S. “A new masonry shear test method determining masonry shear strength,” Proc. 10th Int. Brick and Block Masonry Conf., Calgary 1013–1019.

Jukes P. and Riddington J.R. (1997) “A review of joint shear strength test methods,” Masonry International 10.3.

Riddington J.R. and Jukes P. (1994) “A joint shear strength test method,” Proc. Inst. Civ. Eng. Structs. & Bldgs. Vol. 104, 267–274.

Mann W. and Muller H. (1982) “Failure of shear stressed masonry,” proc. B. Ceram. Soc. No. 30, 223–235.

Page A.W. (1982) “An experimental investigation of the biaxial strength of brick masonry,” Proc. 6th Int. Brick Masonry Conf., Rome 3–15.

Page A.W. , Samarasinghe W. and Hendry A.W. (1982) “The in-plane failure of masonry — a review,” Proc. B. Ceram. Soc. No. 30, 90–100.

Pieper K. and Trautsch W. (1971) “Shear tests on walls,” Proc. 2nd Int. Brick Masonry Conf., Stoke on Trent 140–143.

Riddington J.R. , Gambo A.H. and Edgell G.J. (1991) “An assessment of the influence of unit aspect ratio on the shear strength values given by the proposed triplet test,” Proc. 9th Int. Brick/Block Masonry Conf., Berlin 1321–1328.

Riddington J.R. and Jukes P.G. (1994) “A comparison between panel, joint and code shear strength,” Proc. 10th Int. Brick and Block Masonry Conf., Calgary 1481–1490.

Samarasinghe W. (1980) “In-plane strength of brickwork,” Ph.D Thesis, University of Edinburgh 162–167.

Samarasinghe W. and Hendry A.W. (1982) “The strength of brickwork under biaxial tensile and compressive stress,” Proc. B. Ceram. Soc. No. 30, 129–139.

Schneider H. (1976) “Tests on shear resistance of masonry,” Proc. 4th Int. Brick Masonry Conf., Brugge 4.b.12.

Schneider H. and Schnell W. (1978) “Tests on the shear strength of brickwork,” Betonwerk & Festigteil—Technik 44 303–9, 369–375.

Sinha B.P. and Hendry A.W. (1969) “Racking tests on storey-height shear wall structures with openings subjected to pre-compression,” Designing, Engineering and Constructing with Masonry Products Ed., F.B. Johnson, 192–199.

Turnsek V. and Cacovic F. (1971) “Some experimental results on the strength of brick masonry walls,” Proc. 2nd Int. Brick Masonry Conf., Stoke on Trent 149–160.