This study examined the use of two configurations for capacity restoration of reinforced concrete (RC) one-way ribbed slabs containing openings in shear zones. Four specimens of half-scale comprised three ribs in addition to a top RC slab. The test plan included a control specimen without openings, one with two rib-cutting shear openings, one strengthened using a blend of carbon FRP (CFRP) composites and steel plates, and another retrofitted with a combination of glass FRP (GFRP) composites and steel plates. The two strengthening schemes were found successful at fully restoring the ultimate load of the specimens. The ultimate load of specimen strengthened using the hybrid CFRP/steel system exceeded the control slab without openings by 52%. However, in the other specimen where a mix of steel plates and GFRP sheets was used, the load capacity was only 5% less than the control specimen without openings. While the dissipated energy and stiffness were reinstated and improved for the hybrid CFRP/steel system, they were partially restored for the GFRP/steel system. Additionally, a prediction approach was developed to estimate the maximum load of the slabs. The developed approach considered potential shear and flexural modes of failure, providing close predictions of the ultimate load.
ACI 318 (2019) Building Code Requirements for Structural Concrete and Commentary. Detroit, MI, USA: American Concrete Institute.
2.
ACI 440 (2017) Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures. Farmington Hills, MI, USA: American Concrete Institute.
3.
Al KallasAElsanadedyHAbbasH, et al. (2023) Performance of FRP-upgraded RC one-way ribbed slabs with an opening in flexure zone. Buildings13(9): 2260.
4.
Al-SalloumYASiddiquiNAElsanadedyHM, et al. (2011) Textile reinforced mortar (TRM) versus FRP as strengthening material of seismically deficient RC beam-column joints. Journal of Composites for Construction15(6): 875–1002.
5.
AlmusallamTAl-SalloumYElsanadedyH, et al. (2018) Behavior of FRP-strengthened RC beams with large rectangular web openings in flexure zones: experimental and numerical study. International Journal of Concrete Structures and Materials12: 1–28.
6.
AnilOKayaNArslanO (2013) Strengthening of one-way RC slab with opening using CFRP strips. Construction and Building Materials48: 883–893.
7.
AskarMKHassanAFAl-KamakiYS (2022) Flexural and shear strengthening of reinforced concrete beams using FRP composites: a state of the art. Case Studies in Construction Materials17: e01189.
8.
ASTM A370 (2016) Standard Test Methods and Definitions for Mechanical Testing of Steel Products. West Conshohocken, PA, USA: American Society for Testing and Materials.
9.
ASTM C39/C39M (2018) Standard Test Method for Compressive Strength of Cylindrical. West Conshohocken, PA, USA: American Society for Testing and Materials.
10.
ASTM D3039/D3039M (2017) Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. West Conshohocken, PA, USA: American Society for Testing and Materials.
11.
ASTM E8/E8M (2016) Standard Test Methods for Tension Testing of Metallic Materials. West Conshohocken, PA, USA: American Society for Testing and Materials.
12.
BaiYLBaiSCMeiSJ, et al. (2023) Experimental and numerical study of PEN FRP-strengthened circular RC columns under lateral cyclic loading with high axial compression ratio. Engineering Structures294: 116711.
13.
BaiYLTangZKMeiSJ (2024) Experimental study on shear performance of PET FRP-strengthened RC beams without stirrups. Case Studies in Construction Materials20: e03272.
14.
BarrisCSalaPGómezJ, et al. (2020) Flexural behaviour of FRP reinforced concrete beams strengthened with NSM CFRP strips. Composite Structures241: 112059.
15.
ChoiYParkIHKangSG, et al. (2013) Strengthening of RC slabs with symmetric openings using GFRP composite beams. Polymers5(4): 1352–1361.
16.
ElsanadedyHMAl-SalloumYAAlmusallamTH, et al. (2019) Experimental and numerical study on FRP-upgraded RC beams with large rectangular web openings in shear zones. Construction and Building Materials194: 322–343.
17.
ElsanadedyHMAbbasHAlmusallamTH, et al. (2020) Hybrid UHPC/NSM CFRP strips vs. traditional systems for flexural upgrading of RC beams–experimental and FE study. Composite Structures261: 113291.
18.
EskandarinadafAReza EsfahaniM (2019) Strengthening of two-way RC slabs with central opening. KSCE Journal of Civil Engineering23(3): 1228–1235.
19.
Fib Bulletin 14 (2001) Externally Bonded FRP Reinforcement for RC Structures. Technical Report prepared by the Working Party EBR of Task Group 9.3. Lausanne, Switzerland: International Federation for Structural Concrete.
20.
FloruţSCSasGPopescuC, et al. (2014) Tests on reinforced concrete slabs with cut-out openings strengthened with fibre-reinforced polymers. Composites Part B: Engineering66: 484–493.
21.
HadiSkazeminezhadEsafakhahS (2022) Full-scale experimental evaluation of flexural strength and ductility of reinforced concrete beams strengthened with various FRP mechanisms. Structures43: 1160–1176.
22.
HadjaziKSereirZAmzianeS (2016) Creep response of intermediate flexural cracking behavior of reinforced concrete beam strengthened with an externally bonded FRP plate. International Journal of Solids and Structures94-95: 196–205.
23.
HuangXZhouYXingF, et al. (2020) Reliability-based design of FRP flexural strengthened reinforced concrete beams: guidelines assessment and calibration. Engineering Structures209: 109953.
24.
MahlisMShoeibAEAbd ElnabyS, et al. (2018) The effect of cutting openings on the behavior of two-way solid loaded slabs. Structures16: 137–149.
25.
MeiSJBaiYLDaiJG, et al. (2023) Seismic behaviour of shear critical square RC columns strengthened by large rupture strain FRP. Engineering Structures280: 115679.
26.
NZS 4203 (1992) Code of Practice for General Structural Design and Design Loadings for Buildings 1. New Zealand: NZS.
27.
QureshiMFSheikhSA (2023) Shear behaviour of GFRP strengthened RC beams at elevated temperatures. Construction and Building Materials368: 130371.
28.
SeliemHMSeracinoRSumnerEA, et al. (2011) Case study on the restoration of flexural capacity of continuous one-way RC slabs with cutouts. Journal of Composites for Construction15(6): 992–998.
29.
ShehabHKEisaASEl-AwadyKA (2017) Strengthening of cutouts in existing one-way spanning R. C. flat slabs using CFRP sheets. International Journal of Concrete Structures and Materials11(2): 327–341.
30.
SmithSTKimSJ (2009) Strengthening of one-way spanning RC slabs with cutouts using FRP Composites. Construction and Building Materials23(4): 1578–1590.
31.
TanKZhaoH (2004) Strengthening of openings in one-way reinforced-concrete slabs using carbon fiber-reinforced polymer systems. Journal of Composites for Construction8(5): 393–402.
32.
VasquezAKarbhariV (2003) Fiber reinforced polymer composite strengthening of concrete slabs with cutouts. Structural Journal100(5): 665–673.
33.
VictorJMSyedS (2016) Analytical study on strengthening of waffle slab with opening using CFRP sheets and stiffening ribs. International Research Journal of Engineering and Technology3(9): 239–243.
34.
ZhangFGaoLWuYF, et al. (2021) Flexural design of reinforced concrete structures strengthened with hybrid bonded FRP. Composite Structures269: 113996.
35.
ZhangSSJedrzejkoMJKeY, et al. (2023) Shear strengthening of RC beams with NSM FRP strips: concept and behaviour of novel FRP anchors. Composite Structures312: 116790.
36.
ZhangYBaiYHanS, et al. (2024) Seismic behavior of novel resilient and corrosion-resistant composite columns using strain-hardening engineered cementitious composites and steel-FRP composite bars. Engineering Structures305: 117709.
