Seismic performance of external diaphragm joints of steel beam-to-CFST column encasing fiber reinforced polymer confined UHPC core

Abstract

A novel composite column was introduced by integrating a concrete-filled steel tube column encasing a Fiber Reinforced Polymer (FRP) confined ultra high performance concrete (UHPC) core. In this paper, the seismic performance of four SCF-UHPC composite column-to-steel beam connections using external diaphragm joints was experimentally investigated under the quasi-static test. All specimens failed due to the formation of plastic hinges at the beams and the tearing failure on the beam flanges at the plastic hinge zone. The local buckling at the column end and the panel zone was observed for the specimens receiving the higher axial compression ratio. The increase of FRP tube thickness is more effective in improving the ductility and energy dissipation capacity of the joints than increasing the UHPC core diameter. On the contrary, increasing the UHPC core diameter led to better resistance to the shear deformation of the panel zone. The proportion of shear deformation to the total deformation of the panel zone and the strain distributions were investigated to determine the effect of each component. The composite column in the panel zone mainly carried the compression-bending effort, and the external diaphragm mainly took the shear effort. All joints were eventually classified as semi-rigid type joints, according to the initial rotational stiffness.