The study is on the variation of pressure in different faces of rectangular plan-shaped tall buildings with interference conditions due to the presence of another building with the same shape and dimension connected through a multipurpose bridge. The analysis is done on computational fluid dynamics (namely ANSYS CFX) for 0° to 90° wind incidence angle (WIA). The buildings are spaced 60 m from each other. Different cases have been taken and analyzed based on the different positions of the bridge (i.e., 0.33H, 0.5H, and 0.67H) and compared with the isolated case (i.e., buildings without the bridge). A comparison study has been done in the form of interference factor (IF), so we can clearly understand the effect of the bridge at different heights of the building and isolated conditions on rectangular plan-shaped buildings. The study shows that when the bridge is at 0.5H and 0.33H, the force coefficient along X and Y produces similar results to an isolated condition for WIA of 60° and 30°, respectively.
AhmadSKumarK (2001) Interference effects on wind loads on low-rise hip roof buildings. Engineering Structures23(12): 1577–1589. Available at: https://www.elsevier.com/locate/engstruct
2.
BairagiAKDaluiSK (2021) Estimation of wind load on stepped tall building using CFD simulation. Iranian Journal of Science and Technology, Transactions of Civil Engineering45(2): 707–727. DOI: 10.1007/s40996-020-00535-1.
3.
BhattacharyaSDaluiSK (2022) Effect of side ratio on V plan shaped high-rise building under wind excitation. In: Lecture Notes in Civil Engineering. Berlin, Germany: Springer Science and Business Media Deutschland GmbH, 873–887. DOI: 10.1007/978-3-030-80312-4_75.
4.
ChauhanBSChakrabartiAAhujaAK (2022) Study of wind loads on rectangular plan tall building under interference condition. Structures43: 105–130. DOI: 10.1016/j.istruc.2022.06.041.
5.
DasAPaulRDaluiSK (2023a) Shape optimization of corner recessed square tall building employing surrogate modelling. Wind and Structures36(2): 105–120. DOI: 10.12989/was.2023.36.2.105.
6.
DasAPaulRDaluiSK (2023b) Shape optimization of a corner-recessed square tall building to reduce mean wind pressure using a multi-objective genetic algorithm. The Structural Design of Tall and Special Buildings32: e2054. DOI: 10.1002/tal.2054.
7.
FrankeJHirschCJensenA, et al. (2004) Recommendations on the use of CFD in wind engineering. Urban Civ. Eng1–12. Available at: https://www.costc14.bham.ac.uk/.
8.
HuGTseKTSongJ, et al. (2017) Performance of wind-excited linked building systems considering the link-induced structural coupling. Engineering Structures138: 91–104. DOI: 10.1016/j.engstruct.2017.02.007.
9.
HuangSLiRLiQS (2013) Numerical simulation on fluid-structure interaction of wind around super-tall building at high Reynolds number conditions. Structural Engineering & Mechanics46(2): 197–212. DOI: 10.12989/sem.2013.46.2.197.
10.
HuiYTamuraYYoshidaA (2012) Mutual interference effects between two high-rise building models with different shapes on local peak pressure coefficients. Journal of Wind Engineering and Industrial Aerodynamics104–106(1–3): 98–108. DOI: 10.1016/j.jweia.2012.04.004.
11.
KarRDaluiK (2018) Effect of wind angle on octagonal plan shaped building in isolated and interference condition. International Journal of Advanced Structural Engineering (IJASE)8.
12.
KayışoğluBKurçÖUzolO (2012) Estimation of wind loads on tall buildings through wind tunnel testing. In: 10th international congress on advances in civil engineering, Ankara, Turkey, 17–18 October 2012.
13.
KimYCKandaJ (2013) Wind pressures on tapered and set-back tall buildings. Journal of Fluids and Structures39: 306–321. DOI: 10.1016/j.jfluidstructs.2013.02.008.
14.
KimWTamuraYYoshidaA (2011) Interference effects on local peak pressures between two buildings. Journal of Wind Engineering and Industrial Aerodynamics99(5): 584–600. DOI: 10.1016/j.jweia.2011.02.007.
15.
KimBTseKTTamuraY (2018) POD analysis for aerodynamic characteristics of tall linked buildings. Journal of Wind Engineering and Industrial Aerodynamics181: 126–140. DOI: 10.1016/j.jweia.2018.09.001.
16.
KimBTseKYoshidaA, et al. (2019) Investigation of flow visualization around linked tall buildings with circular sections. Building and Environment153: 60–76. DOI: 10.1016/j.buildenv.2019.02.021.
17.
LamKMH LeungMZhaoJ, et al. (2008) Interference effects on wind loading of a row of closely spaced tall buildings. Journal of Wind Engineering and Industrial Aerodynamics96(5): 562–583. DOI: 10.1016/j.jweia.2008.01.010.
18.
LamKMZhaoJGLeungMYH (2011) Wind-induced loading and dynamic responses of a row of tall buildings under strong interference. Journal of Wind Engineering and Industrial Aerodynamics99(5): 573–583. DOI: 10.1016/j.jweia.2011.02.006.
19.
LaunderBESpaldingDB (1974) The Numerical Computation of Turbulent Flow Computer Methods. Computer Methods in Applied Mechanics and Engineering(Vol. 3). DOI: 10.1016/0045-7825(74)90029-2.
20.
MandalSDaluiSKBhattacharjyaS (2022) Wind effect on closely spaced rectangular tall buildings of U shape geometrical pattern. In: Lecture Notes in Civil Engineering. Berlin, Germany: Springer Science and Business Media Deutschland GmbH, 769–779. DOI: 10.1007/978-3-030-80312-4_66.
21.
MenicovichDLanderDVollenJ, et al. (2014) Improving aerodynamic performance of tall buildings using fluid based aerodynamic modification. Journal of Wind Engineering and Industrial Aerodynamics133: 263–273. DOI: 10.1016/j.jweia.2014.08.011.
22.
MukharjeeSSouvikCDaluiSK, et al. (2014) Wind induce pressure on “Y” plan shape tall building. Wind and Structure19(05): 523–540. DOI: 10.12989/was.2014.19.525.
23.
QinWShiJYangX, et al. (2022) Characteristics of wind loads on Twin-Tower structure in comparison with single tower. Engineering Structures251: 112780. DOI: 10.1016/j.engstruct.2021.112780.
24.
RoyKKumar BairagiA (2016) Wind pressure and velocity around stepped unsymmetrical plan shape tall building using CFD simulation-a case study. Asian Journal of Civil Engineering (BHRC)17(8): 1055–1075.
25.
SanyalPDaluiSK (2021) Effects of internal angle between limbs of “Y” plan shaped tall building under wind load. Journal of Building Engineering33: 101843. DOI: 10.1016/j.jobe.2020.101843.
26.
SongJTseKTamuraY, et al. (2016) Aerodynamics of closely spaced buildings: with application to linked buildings. Journal of Wind Engineering and Industrial Aerodynamics149: 1–16. DOI: 10.1016/j.jweia.2015.11.007.
27.
TanakaHTamuraYOhtakeK, et al. (2012) Experimental investigation of aerodynamic forces and wind pressures acting on tall buildings with various unconventional configurations. Journal of Wind Engineering and Industrial Aerodynamics107–108(1–2): 179–191. DOI: 10.1016/j.jweia.2012.04.014.
28.
ZhangHZhouLDengP, et al. (2022) Fluid--structure-coupled Koopman mode analysis of free oscillating twin-cylinders. Physics of Fluids34: 093610. DOI: 10.1063/5.0113938.
29.
ZhouLHuGTseK, et al. (2021a) Twisted-wind effect on the flow field of tall building. Journal of Wind Engineering and Industrial Aerodynamics218: 104778. DOI: 10.1016/j.jweia.2021.104778.
30.
ZhouLTseKHuG, et al. (2021b) Mode interpretation of interference effects between tall buildings in tandem and side-by-side arrangement with POD and ICA. Engineering Structures243: 112616. DOI: 10.1016/j.engstruct.2021.112616.
31.
ZhouLTseKHuG, et al. (2021c) Higher order dynamic mode decomposition of wind pressures on square buildings. Journal of Wind Engineering and Industrial Aerodynamics211: 104545. DOI: 10.1016/j.jweia.2021.104545.
