Experimental and finite element analysis of reinforced concrete multi-cell box girders retrofitted with carbon fiber reinforced polymer strips under torsion

Abstract

This study expands the state of the art in studies that assess torsional retrofit of reinforced concrete (RC) multi-cell box girders with carbon fiber reinforced polymer (CFRP) strips. The torsional behavior of non-damaged and pre-damaged RC multi-cell box girder specimens externally retrofitted by CFRP strips was investigated through a series of laboratory experiments. It was found that retrofitting the pre-damaged specimens with CFRP strips increased the ultimate torsional capacity by more than 50% as compared to the un-damaged specimens subjected to equivalent retrofitting. This indicated that the retrofit has been less effective for the girder specimen that did not develop distortion beforehand as a result of pre-loading. From experimental observations, when the girder specimen was cracked and the transverse steel reinforcement bars started straining, the CFRP strips started to work more effectively and contributed together with the transverse steel reinforcement to resist torsion load. Additionally, Finite Element (FE) simulations were developed using Abaqus to model the torsional behavior of the retrofitted girders, the results of which were validated with the experimental data. With the numerical model, the effect of concrete compressive strength, transverse reinforcement spacing, and CFRP strip spacing were examined. The effectiveness of the CFRP strips in enhancing the torsional strength of the girder was found to increase with increasing the spacing between the transverse reinforcement.

Keywords

torsion reinforced concrete multi-cell box girder carbon fiber reinforced polymer strips retrofitting finite element parametric study

Get full access to this article

View all access options for this article.

References

Abaqus (2020) Abaqus 6.2: Computer Software for Finite Element Analysis; Dassault Systems Simulia. Johnston, RI: Abaqus.

ACI 318-19 (2019) ACI Committee 318, Building Code Requirements for Structural Concrete. Farmington Hills, MI: USA: American Concrete Institute.

Al-Sherrawi

Shanshal

(2016) Torsional resistance of reinforced concrete girders with web openings. Journal of Engineering 22(2): 137–155.

Birtel

Mark

(2006) Parameterised finite element modeling of RC beam shear failure. ABAQUS users’ conference, Cambridge, MA, May 23–25, 2006.

BS EN 206 (2013) Concrete. Specification, Performance, Production and Conformity. London, UK: BSI.

BS-4449 (1969) Steel for the Reinforcement of Concrete. Weldable Reinforcing Steel. Bar, Coil and Decoiled Product. Specification. London, UK: BSI. ISE/9/1.

CEN 1992-1-1 (2004) Eurocode 2, Design of Concrete Structures - Part 1-1. Brussels, Belgium: General Rules and Rules for Buildings.

Chai

Majeed

Allawi

(2015) Torsional analyses of multicell concrete box girders strengthened with CFRP using a modified softened truss model. Journal of Bridge Engineering 20(8): B4014001. DOI: 10.1061/(ASCE)BE.1943-5592.0000621.

Chalioris

(2006) Experimental study of the torsion of reinforced concrete members. Structural Engineering & Mechanics 23(6): 713–737. DOI: 10.12989/sem.2006.23.6.713.

10.

Chalioris

(2008) Torsional strengthening of rectangular and flanged beams using carbon fibre-reinforced-polymers-experimental study. Construction and Building Materials 22(1): 21–29. DOI: 10.1016/j.conbuildmat.2006.09.003.

(2002) Upgrading torsional resistance of reinforced concrete beams using fiber-reinforced polymer. Journal of Composites for Construction 6(4): 257–263.

(2006) Shear resistance of FRP RC beams: experimental study. Journal of Composites for Construction 10(6): 464–473. DOI: 10.1061/(ASCE)1090-0268(2006)10:6(464).

(2006) An experimental and numerical investigation on torsional strengthening of solid and box-section RC beams using CFRP laminates. Composite Structures 75(1–4): 213–221. DOI: 10.1016/j.compstruct.2006.04.050 .

14.

Hollaway

(2010) A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties. Construction and Building Materials 24(12): 2419–2445. DOI: 10.1016/j.conbuildmat.2010.04.062 .

, et al. (2016) Nonlinear analysis of torsion in reinforced concrete members after developing initial crack. Indian Journal of Science and Technology 9(7): 1–17. DOI: 10.17485/ijst/2016/v9i7/87788.

16.

Hsu

TTC

(1991) Nonlinear analysis of concrete torsional members. Struct J Am Concrete Inst 88(6): 674–682.

, et al. (2019) Shear strength of FRP-externally strengthened high strength RC T-beams. IOP Conference Series: Materials Science and Engineering 601: 012018. DOI: 10.1088/1757-899X/601/1/012018.

18.

Jing

Raongjant

(2007) Torsional strengthening of reinforced concrete box beams using carbon fiber reinforced polymer. Composite Structures 78(2): 264–270. DOI: 10.1016/j.compstruct.2005.10.017.

19.

Khalifa

Nanni

(2002) Rehabilitation of rectangular simply supported RC beams with shear deficiencies using CFRP composites. Construction and Building Materials 16(3): 135–146. DOI: 10.1016/S0950-0618(02)00002-8 .

20.

MacGregor

Ghoneim

(1995) Design for torsion. ACI Structural 92(2): 211–218.

(2021a) Analytical study on torsional behavior of concrete beams strengthened with fiber reinforced polymer laminates using softened truss model. Advances in Structural Engineering 24(8): 1642–1654. DOI: 10.1177/1369433220981693.

(2021b) Finite element analysis of rectangular RC beams strengthened with FRP laminates under pure torsion. Structural Concrete 22(4): 1946–1961. DOI: 10.1002/suco.202000291 .

(2013) Study on torsional strengthening of multi-cell RC box girders. World Academy of Science, Engineering and Technology, Open Science Index 74, International Journal of Civil and Environmental Engineering 7(2): 115–122.

, et al. (2017) Behavior of CFRP strengthened RC multicell box girders under torsion. Structural Engineering & Mechanics 61(3): 397–406. DOI: 10.12989/sem.2017.61.3.397 .

(2016) Torsional improvement of reinforced concrete beams using ultra high-performance fiber reinforced concrete (UHPFC) jackets – experimental study. Construction and Building Materials 106: 533–542. DOI: 10.1016/j.conbuildmat.2015.12.160 .

26.

Mukhtar

Deifalla

(2023) Shear strength of FRP reinforced deep concrete beams without stirrups: test database and a critical shear crack-based model. Composite Structures 307: 116636. DOI: 10.1016/j.compstruct.2022.116636 .

(2019) Fiber-reinforced polymer composites in strengthening reinforced concrete structures: a critical review. Engineering Structures 198: 109542. DOI: 10.1016/j.engstruct.2019.109542 .

28.

Panchacharam

Belarbi

(2002) Torsional behavior of reinforced concrete beams strengthened with FRP composites. First FIB Congress, Osaka, Japan, October 13–19, 2002.

29.

Pham

Al-Mahaidi

(2004) Experimental investigation into flexural retrofitting of reinforced concrete bridge beams using FRP composites. Composite Structures 66: 617–625.

30.

Rahal

(2001) Analysis and design for torsion in reinforced and prestressed concrete beams. Structural Engineering & Mechanics 11(6): 575–590. DOI: 10.12989/sem.2001.11.6.575 .

31.

Rahal

Collins

(1996) Simple model for predicting torsional strength of reinforced and prestressed concrete sections. ACI Structural 93(6): 658–666.

, et al. Shear strengthening of RC beams by NSM technique using GFRP strips for sustainable and resilient infrastructure. Recent Advances in Civil Engineering. Singapore: Springer, 2022. DOI: 10.1007/978-981-19-0189-8_2 .

33.

Saenz

(1964) Discussion of paper “equation for stress-strain curve of concrete” by Desai P. and Krishnan S. Journal of the American Concrete Institute 61: 1229–1235.

(2004) Torsional strengthening of spandrel beams with fiber-reinforced polymer laminates. Journal of Composites for Construction 8(2): 157–162.

35.

Seible

Scordelis

(1983) Nonlinear analysis of multi-cell reinforced concrete box girder bridges. Engineering Structures 5(1): 45–57. DOI: 10.1016/0141-0296(83)90040-8.

36.

Shuraim

(2011) Efficacy of CFRP configurations for shear of RC beams: experimental and NLFE. Structural Engineering & Mechanics 39(3): 361–382. DOI: 10.12989/sem.2011.39.3.361 .

37.

Sika Product Data Sheet (2010) SikaWrap-231 C, carbon fiber fabric for structural strengthening. Available at: www.sika.com.my

38.

Sika Product Data Sheet (2012) Sikadur-330 2-part epoxy impregnation resin. Available at: www.sika.com.my

39.

Wang

Hsu

TTC

(2001) Nonlinear finite element analysis of concrete structures using new constitutive models. Computers & Structures 79(32): 2781–2791.

40.

Williams

Al-Mahaidi

Kalfat

(2011) The west gate bridge: strengthening of a 20th century bridge for 21st century loading. SP-275: Fiber-Reinforced Polymer Reinforcement for Concrete Structures 10th International Symposium Florida, USA: 2-4 April 2011. DOI: 10.14359/51682482.