Abstract
To study the cyclic behavior of partially precast steel fiber high-strength concrete columns with high-strength steel bars, four full-sized square column specimens were fabricated and tested under constant axial load and horizontal cyclic load. The effects of the strength of precast concrete shell and the diameter of cast-in-place column core were analyzed in detail. The results show that partially precast steel fiber high-strength concrete columns have good seismic performance and deformation ability. Compared to the concrete column with lower strength of precast concrete shell, the concrete column with higher strength of precast concrete shell showed higher bearing capacity and energy dissipation capacity while lower ductility. Moreover, with the increase of the diameter of cast-in-place column core, the bearing capacity and the deformation ability of the specimen decreased. Finally, based on the experimental research and theoretical analysis, a calculation model for predicting the maximum bearing capacity was proposed, and the results obtained from the formulas were in good agreement with those from the experiments.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
