In order to analyze the optimal dosage of capsule pre-embedded in concrete materials, this article simplified the irregular cracks generated in concrete materials into linear regular hexagonal cracks in two-dimensional plane and planar cracks in three-dimensional space. Then, the probability model describing the interaction between the cracks and capsules was established using the probability theory of integral geometry. The theoretical solutions for the required capsule dosage for the two- and three-dimensional cases were derived. Finally, the calculated results for the theoretical model were compared with those provided by the computer simulation software. The results indicated that the model is suitable for analyzing and optimizing the capsule dosage required to repair cracks in concrete materials. It can provide a theoretical basis for the design of self-healing materials.
BrownENKesslerMRSottosNR, et al. (2003) In situ poly (urea formaldehyde) microencapsulation of dicyclopentadiene. Journal of Microencapsulation20(6): 719–730.
2.
BrownENWhiteSRSottosNR (2005) Retardation and repair of fatigue cracks in a capsule toughened epoxy composite. Part I: manual infiltration. Composites Science and Technology65(15/16): 2466–2473.
3.
CarusoMMBlaiszikBJWhiteSR (2008) Full recovery of fracture toughness using a nontoxic solvent-based self-healing system. Advanced Functional Materials18(13): 1898–1904.
ChenLJLiuGM (2019) Airflow-dust migration law and control technology under the simultaneous operations of shotcreting and drilling in roadways. Arabian Journal for Science and Engineering44(5): 4961–4969.
6.
ChenLJMaGGLiuGM, et al. (2019) Effect of pumping and spraying processes on the rheological properties and air content of wet-mix shotcrete with various admixtures. Construction and Building Materials225: 311–323.
7.
DryC (1996) Procedures developed for self-repair of polymer matrix composite materials. Composite Structures35(3): 263–269.
8.
DryC (1999) Matrix cracking repair and filling using active and passive modes for smart timed release of chemicals from fibers into cement matrices. Smart Materials and Structures3(2): 118.
HuZXHuXMChengWM, et al. (2018) Performance optimization of one-component polyurethane healing agent for self-healing concrete. Construction and Building Materials179: 151–159.
11.
HuangHLYeG (2011) Application of sodium silicate solution as self-healing agent in cementitious materials. In: LeungCWanKT (eds) Proceedings of International RILEM Conference on Advances in Construction Materials through Science and Engineering, Hong Kong, China, 5–7 September 2001. Bagneux: RILEM Publications SARL, pp. 530–536.
12.
JonkersHMSchlangenE (2007) In Proceedings of FRAMCOS6: Fracture Mechanics of Concrete and Concrete Structures (ed CarpenteriAGambarovaPGFerroG, et al.). Leiden: Taylor & Francis/Balkema, pp. 1821–1826.
13.
KatoueizadehEZebarjadSMJanghorbanK (2020) A practical analytic model for predicting the performance of an encapsulated polymer composite. Applied Mathematical Modelling78: 418–432.
14.
KellerMWSottosNR (2006) Mechanical properties of microcapsules used in a self-healing polymer. Experimental Mechanics46(6): 725–733.
15.
LinJJChenHSLvZ (2018) Analytical solution on dosage of self-healing capsules in materials with two-dimensional multi-shaped crack patterns. Science and Engineering of Composite Materials25(6): 1229–1239.
16.
LvZChenH (2013) Analytical models for determining the dosage of capsules embedded in self-healing materials. Computational Materials Science68: 81–89.
17.
LvZChenH (2014) A probabilistic method for determining the volume fraction of pre-embedded capsules in self-healing materials. Smart Materials and Structures23: 115009.
18.
LvZChenHYuanH (2011a) Quantitative solution on dosage of repair-agent for healing of 3D simplified cracks in materials: short capsule model. Materials and Structures44(5): 987–995.
19.
LvZChenHYuanH (2011b) Quantitative solution on dosage of repair agent for healing of cracks in materials: short capsule model vs. two-dimensional crack pattern. Science and Engineering of Composite Materials18(1/2): 13–19.
20.
LvZChenHYuanH (2014) Analytical solution on dosage of self-healing agents in cementitious materials: long capsule model. Journal of Intelligent Material Systems and Structures25(1): 47–57.
21.
LvZLiSChenHS (2017a) Analytical model for effects of capsule shape on the healing efficiency in self-healing materials. PLoS ONE12(11): e0187299.
22.
LvZLiSChenHS (2017b) Analytical model for the probability characteristics of a crack penetrating capsules in capsule-based self-healing cementitious materials. Materials Science-Medziagotyra23(3): 285–293.
23.
MehtaPK (1997) Durability-critical issues for the future. Concrete International19: 27–33.
24.
MendenhallWBeaverRJBeaverBM (2006) Introduction to Probability and Statistics. 12th ed.Belmont, CA: Duxbury.
25.
MookhoekSDFischerHRZwaagSVD (2010) A numerical study into the effects of elongated capsules on the healing efficiency of liquid-based systems. Computational Materials Science47: 506–511.
26.
MotukuMVaidyaUKJanowskiGM (1999) Parametric studies on self-repairing approaches for resin infused composites subjected to low velocity impact. Smart Materials and Structures8(5): 623–638.
27.
PangJWCBondIP (2005) A hollow fibre reinforced polymer composite encompassing self-healing and enhanced damage visibility. Composites Science and Technology65(11/12): 1791–1799.
28.
PelletierMM (2010) Self-healing concrete. MSc Dissertation, University of Rhode Island, Kingston, RI.
29.
RenDL (1974) Topics in Integral Geometry. Singapore: World Scientific.
30.
RuleJDSottosNRWhiteSR (2007) Effect of microcapsule size on the performance of self-healing polymers. Polymer48(12): 3520–3529.
31.
SolomonH (1978) Geometric Probability. Philadelphia, PA: Society for Industrial and Applied Mathematics.
Van TittelboomKBelieNDLooDV, et al. (2001) Self-healing efficiency of cementitious materials containing tubular capsules filled with healing agent. Cement and Concrete Composites33(4): 497–505.
34.
WhiteSRSottosNRGeubellePH, et al. (2001) Autonomic healing of polymer composites. Nature409(6822): 794–797.
35.
WuMYHuXMZhangQ, et al. (2019) Growth environment optimization for inducing bacterial mineralization and its application in concrete healing. Construction and Building Materials209: 631–643.
36.
ZemskovSVJonkersHVermolenFJ (2001) Two analytical models for the probability characteristics of a crack hitting encapsulated particles: application to self-healing materials. Computational Materials Science50: 3323–3333.
37.
ZwaagSVD (ed.) (2007) Self Healing Materials: An Alternative to 20 Centuries of Materials Science. Dordrecht: Springer.
