This work reports numerical results concerning the cold-formed steel built-up I-section columns composed of four U-profiles under axial compression. A finite element model is developed by using the software program ABAQUS. The developed model includes geometric, material nonlinearities and geometric imperfections. The finite element model was verified against the experimental results reported in the cold-formed steel built-up open section columns. In the parametric study, the sections are analysed with several cross-sectional dimension ratios and lengths, in order to assess their influence on the buckling behaviour and ultimate strength of cold-formed steel built-up I-section columns. After presenting and discussing the numerical parametric results, the article shows that the current direct strength method in the North American Specification for cold-formed steel compression members design curve fails to predict adequately the ultimate strength of some of the columns analysed and addresses the modification proposed on current direct strength method curves, providing improved predictions of all the numerical ultimate strength available. The proposed method is also assessed by reliability analysis.
ABAQUS (2008) ABAQUS Standard (Version 6.12). Johnston, RI: Simulia Inc.
2.
AISI S100-2007 (2007) North American specification for the design of cold-formed steel structural members.
3.
AISI S100-2016 (2016) North American specification for the design of cold-formed steel structural elements.
4.
AnbarasuMAshrafM (2016) Behaviour and design of cold-formed lean duplex stainless steel lipped channel columns. Thin-Walled Structures104: 106–115.
5.
AnbarasuMMurugapandianG (2016) Experimental study on distortional-global buckling mode interaction on the thin-walled lipped channel. Materials and Structures49(4): 1433–1442.
6.
AnbarasuMBharath KumarPSukumarS (2014a) Study on the capacity of cold-formed steel built-up battened columns under axial compression. Latin American Journal of Solids and Structures11(12): 2271–2283.
7.
AnbarasuMKanagarasuKSukumarS (2014b) Investigation on behaviour and strength of cold-formed steel web-stiffened built-up battened columns. Materials and Structures48(12): 4029–4038.
BebianoRSilvestreNCamotimD (2008) GBTUL1.0b – code for buckling and vibration analysis of thin-walled members. Available at: http://www.civil.ist.utl.pt/gbt
10.
BecqueJ (2008) The interaction of local and overall buckling of cold-formed stainless steel columns. PhD Thesis, University of Sydney, Australia.
11.
BecqueJRasmussenKJR (2008) Numerical investigation and design methods for stainless steel columns failing by interaction of local and overall buckling. Research Report, No. 888. Sydney, NSW, Australia: School of Civil Engineering, University of Sydney.
El AghouryMASalemAHHannaMTet al. (2013) Ultimate capacity of battened columns composed of four equal slender angles. Thin-Walled Structures63: 175–185.
14.
FratamicoDCTorabianSRasmussenKJRet al. (2016) Experimental investigation of the effect of screw fastener spacing on the local and distortional buckling behavior of built-up cold-formed steel columns. In: Proceedings of the Wei-Wen Yu international specialty conference on cold-formed steel structure, Baltimore, MD, 9–10 November.
15.
GeorgievaIBSchueremansLPylL (2012a) Composed columns from cold-formed steel Z-profiles. Experiments and code-based predictions of the overall resistance. Engineering Structures37(4): 125–134.
16.
GeorgievaIBSchueremansLPylL (2012b) Experimental investigation of built-up double-Z members in bending and compression. Thin-Walled Structures53(4): 48–57.
17.
GeorgievaIBSchueremansLVandewalleLet al. (2012c) Design of built-up cold-formed steel columns according to the direct strength method. Procedia Engineering40: 119–124.
18.
HashemiBHJafariMA (2009) Experimental evaluation of elastic critical load in battened columns. Journal of Constructional Steel Research65: 125–131.
19.
JeyaraganSMahendranM (2009) Development and validation of finite element models of back to back litesteel beams. Research report, Queensland University of Technology, Brisbane, QLD, Australia.
20.
JeyaraganSSivapathasunderamMahendranM (2008) Numerical modelling and design of the new built-up litesteel beams. In: Proceedings of the fifth international conference on coupled instabilities in metal structures (CIMS) 2008, Sydney, NSW, Australia, 23–25 June 2008.
21.
LiYLi Yinglei WangSShenZ (2014) Ultimate load-carrying capacity of cold-formed thin-walled columns with built-up box and I section under axial compression. Thin-Walled Structures79: 202–217.
22.
LiuJLLueDMLinCH (2009) Investigation on slenderness ratios of built-up compression members. Journal of Constructional Steel Research65(1): 237–248.
23.
LoughlanJYidrisNJonesK (2012) The failure of thin-walled lipped channel compression members due to coupled local-distortional interactions and material yielding. Thin-Walled Structures61(6): 14–21.
24.
LuYZhouTLiWet al. (2017) Experimental investigation and a novel direct strength method for cold-formed built-up I-section columns. Thin-Walled Structures112: 125–139.
25.
NagyZBallokR (2016) Local and global stability analysis of CFS structural members with particular shapes using spot welding technology. In: Proceedings of the international colloquium on stability and ductility of steel structures, Timisoara, 30 May–1 June 2016, pp. 379–386. Red Hook, NY: Curran Associates, Inc.
26.
PiyawatKRamseyerCKangTHK (2011) Nonlinear buckling of built-up cold-formed sections. International Journal of Theoretical and Applied Multiscale Mechanics2(2): 146–164.
27.
PiyawatKRamseyerCKangTHK (2013) Development of an axial load capacity equation for doubly symmetric built-up cold-formed sections. Journal of Structural Engineering-ASCE139(12): 04013008.
28.
ReyesWGuzmanA (2011) Evaluation of the slenderness ratio in built-up cold-formed box sections. Journal of Constructional Steel Research67: 929–935.
29.
SalemAHEl AghouryMHassanSKet al. (2004) Post-buckling strength of battened columns built from cold-formed lipped channels. Emirates Journal for Engineering Research9(2): 117–125.
30.
SchaferBWPekozT (1998) Computational modelling of cold-formed steel: characterizing geometric imperfections and residual stress. Journal of Constructional Steel Research47: 193–210.
SukumarSParameswaranPJayagopalLS (2006) Local-, distortional- and Euler-buckling of thin walled built-up open cross-sections under compression. Journal of Structural Engineering32(6): 447–454.
33.
TingTCHLauHH (2011) Compression test on cold-formed steel built-up back to back channels stub columns. Advanced Materials Research201–203: 2900–2903.
34.
WangLYoungB (2015) Behaviour of cold-formed steel built-up sections with intermediate stiffeners under bending. I: tests and numerical validation. Journal of Structural Engineering142(3): 04015150.
YapDCHancockGJ (2011) Experimental study of high-strength cold-formed stiffened-web C-sections in compression. Journal of Structural Engineering-ASCE137(2): 162–172.
37.
YoungBChenJ (2008) Design of cold-formed steel built-up closed sections with intermediate stiffeners. Journal of Structural Engineering-ASCE134(5): 727–737.
38.
ZhangJHYoungB (2012) Compression tests of cold-formed steel I-shaped open sections with edge and web stiffeners. Thin-Walled Structures52: 1–11.
39.
ZhangJHYoungB (2015) Numerical investigation and design of cold-formed steel built-up open section columns with longitudinal stiffeners. Thin-Walled Structures89: 178–191.
