An overview and assessment for buckling verification of plate- and shell-like elements in hydraulic steel structures is given with regard to current standards DIN 19704-1, EN 1993-1-5, EN 1993-1-6, and EN 1993-1-7. Background information is included for verification procedures that require some explanations either due to gaps or fragmentation in several EN parts. A general way forward for the future framework with regard to buckling verification of hydraulic steel structures is proposed based on the findings herein.
BAW Code of Practice (2017) Bewertung der Tragfähigkeit bestehender Verschlüsse im Stahlwasserbau (Tbvs). Karlsruhe: Federal Waterways Engineering and Research Institute.
2.
BegDKuhlmannUDavaineLet al. (2010) Design of Plated Structures(ECCS Eurocode Design Manuals). Berlin: Ernst & Sohn.
3.
BMVBS (2011) Richtlinie zur Nachrechnung von Straßenbrücken im Bestand (Nachrechnungsrichtlinie). Berlin: Federal Ministry of Transport, Building and Urban Development.
4.
BoeckenhauerMSchulteHJ (1997) Neue Vorschriften des Germanischen Lloyd für Beulfestigkeitsnachweise. Schiff & Hafen49(11): 97–105.
5.
BraunB (2010) Stability of steel plates under combined loading. PhD Thesis, University of Stuttgart, Stuttgart.
6.
BraunB (2016) Study on the stability verification of hydraulic steel structures. Report No. BAW-SPS-RP-001 to 004. Karlsruhe: Federal Waterways Engineering and Research Institute (in German).
7.
DIN 18800 (1990) Steel structures (in German).
8.
DIN 19704-1 (1998) Hydraulic steel structures—Part 1: criteria for design and calculation (in German).
9.
DIN 19704-1 (2014) Hydraulic steel structures—Part 1: criteria for design and calculation (in German).
10.
DIN 19704-2 (2014) Hydraulic steel structures—Part 2: design and manufacturing (in German).
11.
DS 805 (2002) Tragsicherheit bestehender Brückenbauwerke. Deutsche Bahn.
12.
EN 1090-2 (2011) Execution of steel structures and aluminium structures—Part 2: technical requirements for steel structures; German version EN 1090-2:2008 + A1:2011.
13.
EN 1993-1-1 (2015) Eurocode 3: design of steel structures—Part 1-1: general rules and rules for buildings; German version EN 1993-1-5:2005 + AC:2009 + A1:2014 + NA:2015.
14.
EN 1993-1-4 (2017) Eurocode 3: design of steel structures—Part 1-1: general rules—supplementary rules for stainless steels; German version EN 1993-1-4:2015 + NA:2017.
15.
EN 1993-1-5 (2015) Eurocode 3: design of steel structures—Part 1-5: plated structural elements; German version EN 1993-1-5:2006 + AC:2009 + NA:2016.
16.
EN 1993-1-6 (2014) Eurocode 3: design of steel structures—Part 1-6: strength and stability of shell structures; German version EN 1993-1-6:2007 + AC:2009 + A1:2014 + NA:2010.
17.
EN 1993-1-7 (2010) Eurocode 3: design of steel structures—Part 1-7: plated structures subject to out of plane loading; German version EN 1993-1-5:2007+AC:2009+NA:2010.
18.
EN 1993-1-12 (2011) Eurocode 3: design of steel structures—Part 12: additional rules for the extension of EN 1993 up to steel grades S700. German version DIN EN 1993-1-12:2007 + AC:2009 + NA:2011.
19.
GreinerRTarasAKaimP (2011) Stabilitätsnachweis von Stäben mit einfachsymmetrischen Querschnitten—Eurocode-konforme Regelungen im österreichischen Nationalen Anhang zur EN 1993-1-1. Stahlbau80(5): 356–363.
20.
JohanssonBMaquoiGSedlacekCet al. (2007) Commentary and Worked Examples to EN 1993-1-5 “Plated Structural Elements.”Brussels: Joint Research Centre, European Commission.
21.
LindnerJScheerJSchmidtH (eds) (1998) Steel structures: commentary to DIN 18800 Part 1 to Part 4 (in German). 3rd ed.Berlin: Beuth, Ernst & Sohn.
MartinsJP (2014) Behaviour of cylindrically curved steel panels under in-plane stress. PhD Thesis, University of Coimbra, Coimbra.
24.
MartinsJPDa SilvaLSReisA (2014) Ultimate load of cylindrically curved panels under in-plane compression and bending—extension of rules from EN 1993-1-5. Thin-Walled Structures77(4): 36–47.
25.
PeilU (1988) Mitwirkende Gurtfläche von Biegeträgern mit gekrümmten Gurten. Bauingenieur63(5): 213–219.
26.
PeilUSiemsM (1999) Untersuchungen des Tragverhaltens von in Tragrichtung gekrümmten Trägern. Wasserwirtschaft89(4): 188–193.
27.
PeilUSiemsM (2001) Kreiszylindrisch gekrümmte Träger mit breiten Gurten. Stahlbau70(12): 952–958.
28.
ScheerJPeilU (1984) Mitwirkende Breite gekrümmter Stauwände von Stahlwasserbauten. Report no. 6016. Institute for Steel Structures, Technical University of Braunschweig, Braunschweig.
29.
SIA 269/3 (2011) Existing structures—steel structures.
30.
TranKL (2012) Étude de la resistance et de la stabilité des tôles courbes cylindriques en acier: applications aux ouvrages d’art. PhD Thesis, University of Paris-Est, Marne-la-Vallée.
31.
TranKLDouthCSabKet al. (2014a) A preliminary design formula for the strength of stiffened curved panels by design of experiment method. Thin-Walled Structures79(6): 129–137.
32.
TranKLDouthCSabKet al. (2014b) Buckling of stiffened curved panels under uniform axial compression. Journal of Constructional Steel Research103(12): 140–147.
