Computational models, which follow numerical assessment strategies codified by current European rules for shell buckling, were developed so as to study the buckling and post-buckling response of a large set of cylindrical steel thin-shell prototypes with structural openings. Behavioural changes as a consequence of variations in the cutout configuration, that is, shape, size, location and number, were predicted and the obtained numerical estimates were related to the test data of previous experiments in order to explore critical design aspects. Damage modes and axial force–axial displacement response curves were presented and discussed, decoupling the roles played by material nonlinearity and geometrical nonlinearity, as well as the contribution of initial geometrical imperfections to the buckling mechanism of axially compressed cylindrical thin shells.
AlmrothBOHolmesAMC (1972) Buckling of shells with cutouts, experiment and analysis. International Journal of Solids and Structures8(8): 1057–1071.
2.
AlsalahAHollowayDGhanbari GhazijahaniT (2017) Recovery of capacity lost due to openings in cylindrical shells under compression. Journal of Constructional Steel Research137: 169–179.
3.
BatheKJDvorkinEN (1983) On the automatic solution of nonlinear finite element equations. Computers & Structures17(5–6): 871–879.
4.
BrunesiE (2014) Influence of structural openings on the buckling strength of cylindrical steel tanks. PhD Thesis, IUSS Pavia, Pavia.
5.
BrunesiENascimbeneRRassatiGA (2014) Response of partially-restrained bolted beam-to-column connections under cyclic loads. Journal of Constructional Steel Research97: 24–38.
6.
BrunesiENascimbeneRRassatiGA (2015a) Seismic response of MRFs with partially-restrained bolted beam-to-column connections through FE analyses. Journal of Constructional Steel Research107: 37–49.
7.
BrunesiENascimbeneRRotterJM (2016) Influence of structural openings on the buckling strength of cylindrical shells under axial compression. In: Proceedings of the international colloquium on stability and ductility of steel structures (SDSS 2016), Timisoara, 30 May–1 June, pp. 599–606. Berlin: Wiley, Ernst & Sohn.
8.
BrunesiENascimbeneRDeyanovaMet al. (2015b) Numerical simulation of hollow steel profiles for lightweight concrete sandwich panels. Computers and Concrete15(6): 951–972.
9.
BrunesiENascimbeneRPaganiMet al. (2015c) Seismic performance of storage steel tanks during the May 2012 Emilia, Italy, earthquakes. Journal of Performance of Constructed Facilities29(5): 04014137.
10.
CatellaniGPellicanoFDall’AstaDet al. (2004) Parametric instability of a circular cylindrical shell with geometric imperfections. Computers & Structures82(31–32): 2635–2645.
11.
CervantesJAPalazottoAN (1978) Cutout reinforcement of stiffened cylindrical shells. In: Proceedings of the AIAA/ASME/ASCE/AHS 19th structures, structural dynamics, and materials conference, Bethesda, MD, 3–5 April, pp. 331–339. Reston, VA: AIAA.
12.
ChenS-LLiS-F (1994) Study on the nonlinear buckling in thin-walled members with arbitrary initial imperfection. Thin-Walled Structures19(2–4): 253–268.
ChryssanthopoulosMKSpagnoliA (1997) The influence of radial edge constraint on the stability of stiffened conical shells in compression. Thin-Walled Structures27(2): 147–163.
15.
ChryssanthopoulosMKPoggiCSpagnoliA (1998) Buckling design of conical shells based on validated numerical models. Thin-Walled Structures31(1–3): 257–270.
16.
DimopoulosCAGantesCJ (2015) Numerical methods for the design of cylindrical steel shells with unreinforced or reinforced cutouts. Thin-Walled Structures96: 11–28.
17.
EN 1993-1-6:2007 (2007) Eurocode 3: design of steel structures – part 1–6: strength and stability of shell structures (Brussels: CEN, 2007).
18.
European Convention for Constructional Steelwork (ECCS) (2008) European Recommendations for Steel Construction: Buckling of Shells. 5th ed.Brussels: ECCS.
19.
Ghanbari GhazijahaniTJiaoHHollowayD (2015a) Fatigue experiments on circular hollow sections with CFRP reinforced cutouts. Journal of Constructional Steel Research106: 322–328.
20.
Ghanbari GhazijahaniTJiaoHHollowayD (2015b) Structural behavior of shells with different cutouts under compression: an experimental study. Journal of Constructional Steel Research105: 129–137.
21.
HanHChengJTaheriFet al. (2006) Numerical and experimental investigations of the response of aluminum cylinders with a cutout subject to axial compression. Thin-Walled Structures44(2): 254–270.
22.
HaoPWangBTianKet al. (2016) Efficient optimization of cylindrical stiffened shells with reinforced cutouts by curvilinear stiffeners. AIAA Journal54(4): 1350–1363.
23.
HilburgerMWStarnesJHJr (2005) Buckling behavior of compression-loaded composite cylindrical shells with reinforced cutouts. International Journal of Non-Linear Mechanics40(7): 1005–1021.
24.
HilburgerMWBrittVONemethMP (2001) Buckling behavior of compression-loaded quasi-isotropic curved panels with a circular cutout. International Journal of Solids and Structures38(9): 1495–1522.
25.
JanisseTCPalazottoAN (1983) Collapse analysis of composite panels with cutouts. In: Proceedings of the AIAA/ASME/ASCE/AHS 24th structures, structural dynamics, and materials conference, Lake Tahoe, NV, 2–4 May, paper no. AIAA paper 83-08. Reston, VA: AIAA.
26.
JullienJFLimamA (1998) Effects of openings of the buckling of cylindrical shells subjected to axial compression. Thin-Walled Structures31(1–3): 187–202.
27.
KimS-EKimC-S (2002) Buckling strength of the cylindrical shell and tank subjected to axially compressive loads. Thin-Walled Structures40(4): 329–353.
28.
LeeCEPalazottoAN (1984) Nonlinear collapse analysis of composite cylindrical panels with small cutouts or notches. In: Proceedings of the AIAA/ASME/ASCE/AHS 25th structures, structural dynamics, and materials conference, Palm Springs, CA, 14–16 May, paper no. AIAA paper 84-0889. Reston, VA: AIAA.
29.
LeeSESahinSRigoPet al. (2017) Ultimate strength of cylindrical shells with cutouts. Ships and Offshore Structures12: S153–S173.
30.
MadenciEBarutA (1994) Pre- and postbuckling response of curved, thin, composite panels with cutouts under compression. International Journal for Numerical Methods in Engineering37(9): 1499–1510.
31.
NemethMP (1988) Buckling behavior of compression-loaded symmetrically laminated angle-ply plates with holes. AIAA Journal26(3): 330–336.
32.
NemethMP (1990) Buckling and post-buckling behavior of square compression-loaded graphite-epoxy plates with circular cutouts. NASA technical paper 3007, 1 August. Washington, DC: NASA.
33.
NemethMP (1996) Buckling and post-buckling behavior of laminated composite plates with a cutout. NASA technical paper 3587, July. Washington, DC: NASA.
RotterJM (1990) Local collapse of axially compressed pressurized thin steel cylinders. Journal of Structural Engineering: ASCE116(7): 1955–1970.
36.
RotterJM (1997) Design standards and calculations for imperfect pressurised axially compressed cylinders. In: Proceedings of the international conference on carrying capacity steel shell structures, Brno, 1–3 October, pp. 354–360. VUT, Brno University of Technology.
37.
RotterJM (1998) Shell structures: the new European standard and current research needs. Thin-Walled Structures31(1–3): 3–23.
38.
RotterJM (2004) Buckling of cylindrical shells under axial compression. In: TengJGRotterJM (eds) Buckling of Thin Metal Shells. London: Spon Press, pp. 42–87.
39.
RotterJM (2005) The practical design of shell structures exploiting different methods of analysis. In: PietraszkiewiczWSzymczakC (eds) Structures: Theory and Applications. London: Taylor & Francis, pp. 71–86.
40.
RotterJM (2008) The elastic-plastic imperfection sensitivity of axially compressed cylinders with weld depressions. In: Proceedings of the 2008 EUROSTEEL, Graz, 3–5 September, pp. 1497–1502. ECCS, European Convention for Constructional Steelwork.
41.
RotterJMTengJG (1989) Elastic stability of cylindrical shells with weld depressions. Journal of Structural Engineering: ASCE115(5): 1244–1263.
42.
RotterJMZhangQ (1990) Elastic buckling of imperfect cylinders containing granular solids. Journal of Structural Engineering: ASCE116(8): 2253–2271.
43.
SadamotoSOzdemirMTanakaSet al. (2017) An effective meshfree reproducing kernel method for buckling analysis of cylindrical shells with and without cutouts. Computational Mechanics59(6): 919–932.
44.
ShariatiMHatamiH (2012) Experimental study of SS304L cylindrical shell with/without cutout under cyclic axial loading. Theoretical and Applied Fracture Mechanics58(1): 35–43.
45.
ShariatiMRokhiMM (2008) Numerical and experimental investigations on buckling of steel cylindrical shells with elliptical cutout subject to axial compression. Thin-Walled Structures46(11): 1251–1261.
46.
SongCYTengJGRotterJM (2004) Imperfection sensitivity of thin elastic cylindrical shells subject to partial axial compression. International Journal of Solids and Structures41(24–25): 7155–7180.
47.
TengJGRotterJM (1992) Buckling of pressurized axisymmetrically imperfect cylinders under axial loads. Journal of Engineering Mechanics: ASCE118(2): 229–247.
48.
TengJGLinXRotterJMet al. (2005) Analysis of geometric imperfections in full-scale welded steel silos. Engineering Structures27(6): 938–950.
49.
TodaS (1983) Buckling of cylinders with cutouts under axial compression. Experimental Mechanics23(4): 414–417.
50.
YılmazHKocabaşİÖzyurtE (2017) Empirical equations to estimate non-linear collapse of medium-length cylindrical shells with circular cutouts. Thin-Walled Structures119: 868–878.
