During laser deep penetration welding, a complex multiphase interaction significantly affects the welding process. Although the effects of plume particles on keyhole behaviour have been examined experimentally, the underlying mechanisms remain insufficiently validated. This study developed a Rand function-based plume model to describe the dynamic attenuation of laser energy by plume particles, coupled with a multi-physics simulation of keyhole dynamics. Considering plume effects, the average keyhole depth decreased by 13%, and the probability of keyhole bottom collapse increased by 12%. Bubbles resulting from keyhole collapse were positioned further from the keyhole bottom, and easier to cause porosity defects. The simulations also revealed enhanced molten pool surface expansion. This study successfully validated the effect of laser-induced plume on keyhole instability through simulation.
FlorianTSchrickerKZenzC, et al.Combining in situ synchrotron X-ray imaging and multiphysics simulation to reveal pore formation dynamics in laser welding of copper. Int J Mach Tools Manuf2025; 204: 104224.
2.
HanCJiangPGengS, et al.Multi-physics multi-scale simulation of unique equiaxed-to-columnar-to-equiaxed transition during the whole solidification process of Al-Li alloy laser welding. J Mater Sci Technol2024; 171: 235–251.
3.
LiveraniEAscariATomesaniL, et al.From conduction to keyhole transition on copper using blue laser: bead-on-plate process modeling and analysis of physical phenomena. J Mater Process Technol2023; 316: 117953.
4.
LiSChenGKatayamaS, et al.Experimental study of phenomena and multiple reflections during inclined laser irradiating. Sci Technol Weld Join2014; 19: 82–90.
HuangLHuaXWuD, et al.Effect of magnesium content on keyhole-induced porosity formation and distribution in aluminum alloys laser welding. J Manuf Process2018; 33: 43–53.
7.
KrasnoperovMPietersRRichardsonI. Weld pool geometry during keyhole laser welding of thin steel sheets. Sci Technol Weld Join2004; 9: 501–506.
8.
JiangMChenXChenY, et al.Mitigation of porosity defects in fiber laser welding under low vacuum. J Mater Process Technol2020; 276: 116385.
9.
ZhaoXZhangWChenH, et al.Analysis of dynamic characteristics of vapor plume of oscillating laser welding of SUS301L-HT stainless steel. Opt Laser Technol2023; 159: 108947.
10.
YouheiAYousukeKHiroshiN, et al.Effect of reduced pressure atmosphere on weld geometry in partial penetration laser welding of stainless steel and aluminium alloy with high power and high brightness laser. Sci Technol Weld Join2014; 19: 324–332.
11.
GresesJHiltonPABarlowCY, et al.Plume attenuation under high power Nd:yttritium–aluminum–garnet laser welding. J Laser Appl2004; 16: 9–15.
12.
KawahitoYKinoshitaKMatsumotoN, et al.Effect of weakly ionised plasma on penetration of stainless steel weld produced with ultra high power density fibre laser. Sci Technol Weld Join2008; 13: 749–753.
13.
LacroixDJeandelGBoudotC. Solution of the radiative transfer equation in an absorbing and scattering Nd:YAG laser-induced plume. J Appl Phys1998; 84: 2443–2449.
14.
ScholzTDickmannKOstendorfA. Investigation of the formation of nanoparticles during laser remote welding. Phys Procedia2013; 41: 90–97.
15.
XuJWangXYaoC, et al.A dual in-situ monitoring of multiphase dynamics during laser wire fusion process with synchrotron radiation and visible light. J Manuf Process2024; 131: 2528–2534.
16.
BitharasIParabNZhaoC, et al.The interplay between vapour, liquid, and solid phases in laser powder bed fusion. Nat Commun2022; 13: 1–12.
17.
ErikssonIPowellJKaplanA. Measurements of fluid flow on keyhole front during laser welding. Sci Technol Weld Join2011; 16: 636–641.
18.
PangSChenXLiW, et al.Efficient multiple time scale method for modeling compressible vapor plume dynamics inside transient keyhole during fiber laser welding. Opt Laser Technol2016; 77: 203–214.
19.
ChoWINaSJThomyC, et al.Numerical simulation of molten pool dynamics in high power disk laser welding. J Mater Process Technol2012; 212: 262–275.
20.
MuhammadSHanSWNaSJ, et al.Study on the role of recondensation flux in high power laser welding by computational fluid dynamics simulations. J Laser Appl2018; 30: 012013.
21.
AsaiSMuchiI. Theoretical analysis and model experiments on the formation mechanism of channel-type segregation. Trans Iron Steel Inst Japan1978; 18: 90–98.
22.
WuDHuaXHuangL, et al.Numerical simulation of spatter formation during fiber laser welding of 5083 aluminum alloy at full penetration condition. Opt Laser Technol2018; 100: 157–164.
23.
KnightCJ. Theoretical modeling of rapid surface vaporization with back pressure. AIAA J1979; 17: 519–523.
24.
ZhangYHeXYuG, et al.Dynamic evolution of keyhole during multi-pulse drilling with a millisecond laser on 304 stainless steel. Opt Laser Technol2022; 152: 108151.
25.
MahrleABartelsFBeyerE. Theoretical aspects of the process efficiency in laser beam cutting with fiber lasers. In: ICALEO 2008 - 27th Int. Congr. Appl. Lasers Electro-Optics, Congr. Proc, 2008, pp. 703–712.
26.
ZouJHanXZhaoY, et al.Investigation on plume formation during fiber laser keyhole welding based on in-situ measurement of particles in plume. J Manuf Process2021; 65: 153–160.
27.
JiangMTaoWWangS, et al.Effect of ambient pressure on interaction between laser radiation and plasma plume in fiber laser welding. Vacuum2017; 138: 70–79.
28.
GongJPengGLiL, et al.Effect of plasma plume produced by vacuum laser welding on energy transmission. Opt Laser Technol2021; 136: 106744.
29.
ZhangRTangXXuL, et al.Study of molten pool dynamics and porosity formation mechanism in full penetration fiber laser welding of Al-alloy. Int J Heat Mass Transf2020; 148: 119089.
30.
YangFMengXPutraSN, et al.Numerical analysis of the effect of an oscillating metal vapor plume on the keyhole and molten pool behavior during deep penetration laser beam welding. J Laser Appl2023; 35: 042041.
31.
ZouJYangWWuS, et al.Effect of plume on weld penetration during high-power fiber laser welding. J Laser Appl2016; 28: 022003.
32.
BlecherJJGalbraithCMVan VlackC, et al.Real time monitoring of laser beam welding keyhole depth by laser interferometry. Sci Technol Weld Join2014; 19: 560–564.
33.
ZouJWuSHeY, et al.Distinct morphology of keyhole wall during high power fibre laser deep penetration welding. Sci Technol Weld Join2015; 20: 655–658.
34.
FabbroRSlimaniSCosteF, et al.Study of keyhole behaviour for full penetration Nd-Yag CW laser welding. J Phys D Appl Phys2005; 38: 1881–1887.
35.
ZouJHaNXiaoR, et al.Interaction between the laser beam and keyhole wall during high power fiber laser keyhole welding. Opt Express2017; 25: 17650.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
