Abstract
Softening of the heat-affected zone degrades the mechanical properties of high-strength steel-welded joints. This work revealed the key mechanism to suppress the adverse effects of the soft zone on joint performance by analyzing the constraint between different zones. The base metal (BM) can compete with the soft zone for plastic deformation when the soft zone is strongly constrained by the hard zone, which helps to disperse local strain and prevent premature necking. The constraint mode of the soft zone tends to evolve asymmetrically from bilateral to unilateral during the deformation. Reducing the width of the soft zone helps to achieve unilateral constraint, thus shifting the fracture location from the soft zone to the BM.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
