The Effect of Design Changes on Sound Transmission through a Building

Abstract

A statistical energy analysis model of a building was used to assess the effect of design changes on sound transmission. Systematic changes were made to the material properties (density, Young's modulus, Poisson's ratio and internal loss factor) and to the dimensions (thickness and room size).

These changes resulted in a redistribution of the energy throughout the building causing the noise level to go up in some rooms and to go down in others. For each case examined it was found that the effect of several changes could be estimated from the sum of the individual changes. Thus a change of 20% in the density resulted in approximately double the change in D_nTw that was obtained from a 10% change in density. The same additive effect was also found to apply if more than one variable was changed at the same time. Thus the change in D_nTw resulting from a small change in Young's modulus for the floors and a small change in the density of the walls can be estimated from the sum of the two individual effects.

Changes to the thickness and density of the walls and floors have the greatest effect on sound transmission whilst changes to Young's modulus and Poisson's ratio have a much smaller effect. Damping can also have a significant effect on transmission particularly far from the source.

Get full access to this article

View all access options for this article.

References

Craik

R.J.M.

Thancanamootoo

(1992). The importance of in-plane waves in sound transmission through buildings. Applied Acoustics 37, 85–109.

Craik

R.J.M.

(1996). Sound transmission through buildings using statistical energy analysis. Gower, UK.

Maidanik

(1962). Response of ribbed panels to reverberant acoustic fields. Journal of the Acoustical Society of America 34, 809–826.

Leppington

F.G.

Broadbent

E.G.

Heron

K.H.

(1982). The acoustic radiation efficiency of rectangular panels. Proceedings of the Royal Society of London A382, 245–271.

Leppington

F.G.

Broadbent

E.G.

Heron

K.H.

(1984). Acoustic radiation from rectangular panels with constrained edges. Proceedings of the Royal Society of London A393, 67–84.

Leppington

F.G.

(1996). Acoustic radiation from plates into a wedge-shaped fluid region: Application to the free plate problem. Proceedings of the Royal Society of London A452, 1745–1764.

Leppington

F.G.

Heron

K.H.

Broadbent

E.G.

Mead

S.M.

(1987). Resonant and non-resonant acoustic properties of elastic panels. II. The transmission problem. Proceedings of the Royal Society of London A412, 309–337.

Craven

R.G.

Gibbs

B.M.

(1981). Sound transmission and mode coupling at junctions of thin plates, Part I: Representation of the problem. Journal of Sound and Vibration 77, 417–427.

BS 2750: Part 4 (1980). Methods of measurement of sound insulation in buildings and of building elements. Part 4: Field measurements of airborne sound insulation between rooms. British Standards Institution, London.

10.

BS 5821: Part 1 (1984). Methods for rating the sound insulation in buildings and of building elements. Part 1: Methods for rating the airborne sound insulation in buildings and of building elements. British Standards Institution, London.

11.

Cremer

Heckl

Ungar

E.E.

(1988). Structure-borne sound, Springer-Verlag, Berlin.

12.

Beranek

L.L.

Ver

I.L.

(1992). Noise and vibration control engineering, J. Wiley and Sons, New York.