On the Single Number Rating of Sound Absorption

Abstract

The International Standards Organisation (ISO) is currently developing a standard by which the frequency dependent values of the sound absorption coefficient of building materials can be expressed as a single number rating. This paper describes the new rating procedure and relates it to measurement techniques currently employed. The practical implications are discussed and some examples of results presented. The new rating procedure was tested on various brickwork to be employed for building facades. Some of them were variants of common products, only differing in surface roughness; others were of new material not yet commercially available. Modifications to the production process allowed bricks with a perforated surface to be measured where the depth and the width of the holes could be varied to give a strong reactive absorption at various frequencies. The measurements were performed in an impedance tube, using both the conventional pure-tone technique and a variant of the transfer-function method, which is also described.

Get full access to this article

View all access options for this article.

References

Council of the European Communities Directive 89/106/EEC – Construction products, Off. J.E.C. L40 of 11 February 1989, Brussels.

ISO/DIS 11654, Acoustics – Sound absorbers for use in buildings – Rating of sound absorption (1994).

ISO 354, Acoustics – Measurement of sound absorption in a reverberation room (1985).

ISO/DIS 10534, Acoustics – Determination of sound absorption coefficient and impedance or admittance by the impedance tube method (1994).

Bruel & Kjaer, Standing wave apparatus type 4002 – Instructions and applications Naerum, Denmark (1959).

Garai

, Farina

and Scida

, An improved transfer function technique for impedance tube measurements, Proc. WESTPRAC V Seoul, Korea, 1, 99–104 (1994).

Seybert

A.F.

and Ross

D.F.

, Experimental determination of acoustic properties using a] two-microphone random-excitation technique, J. Acoust. Soc. Am. 6 1, 1362–1370 (1977).

Chung

J.Y.

and Blaser

D.A.

, Transfer function method of measuring induct acoustic properties. 1. Theory, J. Acoust. Soc. Am. 6 8(3), 907–913. (1980).

Fahy

F.J.

, Rapid method for the measurement of sample acoustic impedance in a standing wave tube”, J. Sound Vib. 9 7(1), 168–170. (1984).

10.

Chu

W.T.

, Transfer function technique for impedance and absorption measurements in an impedance tube using a single microphone, J. Acoust. Soc. Am. 8 0(2), 555–560. (1986).

11.

ISO/CD 10534–2, Acoustics – Determination of sound absorption coefficient and impedance in impedance tubes – Part 2: Transfer function method (1994).

12.

Garai

and Scida

, Single number rating of acoustic absorption: a test on special bricks”, Proc. Internoise 94 Yokohama, Japan, 3, 1523–1526, (1994).