In this study, the abrasive wear behavior of composites reinforced with undoped polyetheretherketone (PEEK), 30% carbon fiber (CF) and 30% glass fiber (GFR) was investigated using Taguchi experimental optimization method. As a result of the investigation, the best abrasive wear rate occurred in 30% CF reinforced composite material at 4 N application load, 60 m sliding distance and 220 m grit size. In addition, by applying Analysis of Variance (ANOVA) analysis, it was determined that the most effective parameter on the abrasive wear rate was the grit size parameter with 62%. Finally, the mathematical equation obtaining the optimum abrasive wear rate was successfully established with a coefficient of 91%.
YanSMenSZouH, et al.Carbon fiber cannot always reduce the wear of PEEK for orthopedic implants under DPPC lubrication. Friction2023; 11: 395–409.
2.
DangJSunJLiuZ. Interfacial strengthening and processing of carbon fibers reinforced poly(ether-ether-ketone) composites: a mini-review. Polym Compos2024; 45: 6788–6803.
3.
HintzeMEliasenNSivebaekI. Wear and friction of PEEK composites, dry or lubricated. Wear2023; 534: 205135.
4.
MaslaviAUnalHOlabiMN. Determination of “tribological performance working fields” for pure PEEK and PEEK composites under dry sliding conditions. Wear2024; 554–555: 205464.
5.
ToroSAGonzalezCFernandez-BlazquezJP,et al.Fabrication and mechanical properties of a high-performance PEEK-PEI hybrid multilayered thermoplastic matrix composite reinforced with carbon fiber. Compos Part A Appl Sci Manuf2024; 185: 108308.
6.
SongEBianDZhaoY, et al.Friction and wear characteristics of CF/PEEK composites under different process conditions. Eng Plast Appl2021; 49: 3–58.
7.
NikonovichMRamalhoAEmamiN. Effect of cryogenic aging and test-environment on the tribological and mechanical properties of PEEK composites. Tribol Int2024; 194: 109554.
8.
GhoshBXuFHouX. Thermally conductive poly(ether ether ketone)/boron nitride composites with low coefficient of thermal expansion. J Mater Sci2021; 56: 10326–10337.
9.
NaffakhMDiez-PascualAMGomez-FatouMA. New hybrid nanocomposites containing carbon nanotubes, inorganic fullerene-like WS2 nanoparticles and poly(ether ether ketone) (PEEK). J Mater Chem2011; 21: 7425–7433.
10.
SilvaSBarbosaJMSousaJD, et al.High-Performance PEEK/MWCNT nanocomposites: combining enhanced electrical conductivity and nanotube dispersion. Polym2024; 16: 583.
11.
RendasPFigueiredoLMachadoC, et al.Mechanical performance and bioactivation of 3D-printed PEEK for high-performance implant manufacture: a review. Prog Biomater2023; 12: 89–111.
12.
MohanaSundaramAKamalakannanYRajaV, et al.The world’s first 3D-printed PEEK cranial implant: a new horizon in precision and personalized neurosurgery. Neurosurg Rev2024; 47: 616.
13.
LinLSchlarbAK. Recycled carbon fibers as reinforcements for hybrid PEEK composites with excellent friction and wear performance. Wear2019; 432–433: 202928.
14.
WangYCuiXGeH, et al.Chemical recycling of carbon fiber reinforced epoxy resin composites via selective cleavage of the carbon−nitrogen bond. ACS Sustain Chem Eng2015; 3: 332–3337.
15.
MeyerLOSchulterK. CFRP-recycling following a pyrolysis route: process optimization and potentials. J Compos Mater2009; 43: 1121–1332.
16.
LiYHanXCuiX, et al.Friction and wear performance of a hydraulic motor roller/piston pair contact lined with the self-lubricating bearing bush modified by PEEK. Appl Sci2024; 14: 6011.
17.
LinZZhangKYeJ, et al.The effects of filler type on the friction and wear performance of PEEK and PTFE composites under hybrid wear conditions. Wear2022; 490: 204178.
18.
HouXBaiPLiJ, et al.Mos2 reinforced PEEK composite for improved aqueous boundary lubrication. Friction2023; 11: 1660–1672.
19.
YeXHuZLiX, et al.Non-Isothermal crystallization kinetics of polyether-ether-ketone nanocomposites and analysis of the mechanical and electrical conductivity performance. Polym2022; 14: 4623.
20.
ParandoushPLinD. A review on additive manufacturing of polymer-fiber composites. Compos Struct2017; 182: 36–53.
21.
MelchelsFPWFeijenJGrijpmaDW. A review on stereolithography and its applications in biomedical engineering. Biomater2010; 31: 6121–6130.
22.
Mitsubishi Chemical Group, Japan. Available online: https://www.mcam.com/en (accessed on 8 November 2024).
23.
Kian BashandehKLanPPolycarpouAA. Abrasive wear of PEEK and ATSP-based polymer composite coatings under lunar regolith conditions. Wear2022; 506–507: 204461.
24.
SongJLiuYHWangS, et al.Study on the wettability and tribological behaviors of glass fiber reinforced poly(ether-ether-ketone) against different polymers as bearing materials for artificial cervical disc. Biotribol2015; 4: 18–29.
25.
LiEZWangHDXuBS,et al.Research on tribological behavior of PEEK and glass fiber reinforced PEEK composite. Phys Procedia2013; 50: 453–460.
26.
NayanDCayetanoEArdianM,et al.Tribological performance of 3D printed neat and carbon fiber reinforced PEEK composites. Tribol Int2024; 193: 109356.
27.
GrecoACErckRAjayiO,et al.Effect of reinforcement morphology on high-speed sliding friction and wear of PEEK polymers. Wear2011; 271: 2222–2229.
MirAHCharooMS. Friction and wear characteristics of polyetheretherketone (PEEK): a review. 2019 IOP Conf Ser Mater Sci Eng2019; 561: 012051.
30.
MaksimNAmilcarRNazaninE. Effect of cryogenic aging and test-environment on the tribological and mechanical properties of PEEK composites. Tribol Int2024; 194: 109554.
31.
KianBPixiangLAndreasAP. Abrasive wear of PEEK and ATSP-based polymer composite coatings under lunar regolith conditions. Wear2022; 506–507: 204461.
32.
MathiasHNiklasEIonS. Wear and friction of PEEK composites, dry or lubricated. Wear2023; 534–535: 205135.
33.
SharmaMBijweJMitschangP. Abrasive wear studies on composites of PEEK and PES with modified surface of carbon fabric. Tribol Int2011; 44: 81–91.
34.
HuTZhangWWuM, et al.Ultralow friction of PEEK composites under seawater lubrication. J Mater Res Technol2024; 30: 983–991.
35.
HintzeMEliasenNSivebaekI. Wear and friction of PEEK composites, dry or lubricated. Wear2023; 534–535: 205135.
36.
FiciciF. The experimental optimization of abrasive wear resistance model for an in-situ AlB2/al-4Cu metal matrix composite. Ind Lubr Tribol2016; 68: 632–639.
37.
KhuriAI. Introduction to linear regression analysis, fifth edition by douglas C. Montgomery, elizabeth A. Peck, G. Geoffrey vining. Int Stat Rev2013; 81: 318–319.
38.
JiRZhaoQZhaoL, et al.Study on high wear resistance surface texture of electrical discharge machining based on a new water-in-oil working fluid. Tribol Int2023; 180: 108218.
