Abstract
Predictions of film thickness in elastohydrodynamic lubricated (EHL) contacts generally rely on the assumption of a semi-infinite equivalent solid to calculate elastic deformations. However, this assumption often fails when the contact is near an edge of one of the solids. This paper explores the impact of a solid edge being close to or within a theoretical EHL contact area on film thickness. We specifically highlight the advantages of a sharp edge over a chamfer, and the non-monotonous effect of the fillet radius on the minimum film thickness. Semi-analytical equations are developed to determine the maximum and minimum lubricant film thickness in a truncated contact and compare numerical results with experimental data in cases involving a chamfer.
Get full access to this article
View all access options for this article.
