To improve the antifriction and vibration reduction performances of oil-film bearings in hydroelectric generating set, textured CSS-42L surfaces filled with Sn-Ag-Cu-Ti3C2 (TSs-SACT) were prepared, and the friction and vibration experiments under oil lubrication were carried out. The results showed that TSs-SACT with texture pitch of 600 μm and MXene of 5 wt.% (TSs-SACT(5%)-600) had the best antifriction, which reduced the fluctuation amplitudes of frictional forces and suppressed the friction-induced vibrations. The wear morphologies were improved by the synergistic effects of oil, grooves and Sn-Ag-Cu-Ti3C2, and TSs-SACT(5%)-600 with uniform profiles had the excellent wear resistance. The complexity of surface profiles could be characterized by fractal dimension, which can be enhanced by Sn-Ag-Cu-Ti3C2. TSs-SACT(5%)-600 with complex profiles keeps good antifriction during lubrication state transitions, which effectively improves the operation reliability of oil-film bearing in hydroelectric generating set.
QiuZFWangFFLiQS,et al.Corrosion and mechanical properties for Cr-coated CSS-42L bearing steel after Ti and C ions co-implantation. Appl Surf Sci2020; 509: 145293.
2.
WangFFZhengLJLiQS,et al.Corrosion properties of carbon ions implanted chromium coating prepared on CSS-42L aerospace bearing steel. Surf Coat Tech2018; 349: 392–399.
3.
WangFFZhouCGZhengLJ,et al.Improvement of the corrosion and tribological properties of CSS-42L aerospace bearing steel using carbon ion implantation. Appl Surf Sci2017; 392: 305–311.
4.
MalakiMVarmaRS. Mechanotribological aspects of MXene-reinforced nanocomposites. Adv Mater2020; 32: 2003154.
GuoLHZhangYMZhangG,et al.MXene-Al2O3 synergize to reduce friction and wear on epoxy-steel contacts lubricated with ultra-low sulfur diesel. Tribol Int2021; 153: 106588.
LianWQMaiYJLiuC,et al.Two-dimensional Ti3C2 coating as an emerging protective solid-lubricant for tribology. Ceram Int2018; 44: 20154–20162.
9.
ZhaiWBaiLZhouR,et al.Recent progress on wear-resistant materials: designs, properties, and applications. Adv Sci2021; 8: 2003739.
10.
SinghNAwasthiRK. Influence of texture geometries on the performance parameters of hydrodynamic journal bearing. P I Mech EngJ-J Eng2021; 235: 2056–2072.
11.
BabuPVIsmailSBenBS. Experimental and numerical studies of positive texture effect on friction reduction of sliding contact under mixed lubrication. P I Mech Eng J-J Eng2021; 235: 360–375.
12.
XieZLZhangYZhouJZ,et al.Theoretical and experimental research on the micro interface lubrication regime of water lubricated bearing. Mech Syst Signal Pr2021; 151: 107422.
13.
XieZLWangXRZhuWD. Theoretical and experimental exploration into the fluid structure coupling dynamic behaviors towards water-lubricated bearing with axial asymmetric grooves. Mech Syst Signal Pr2022; 168: 108624.
14.
KornaevAVKornaevaEPSavinLA,et al.Enhanced hydrodynamic lubrication of lightly loaded fluid-film bearings due to the viscosity wedge effect. Tribol Int2021; 160: 107027.
15.
CostaHLHutchingsIM. Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribol Int2007; 40: 1227–1238.
16.
GachotCRosenkranzAHsuSM,et al.A critical assessment of surface texturing for friction and wear improvement. Wear2017; 372–373: 21–41.
17.
ZhouHYShiXLLuGC,et al.Friction and wear behaviors of TC4 alloy with surface microporous channels filled by Sn-Ag-Cu and Al2O3 nanoparticles. Surf Coat Tech2020; 387: 125552.
18.
XueYWWuCHShiXL,et al.Effects of groove-textured surfaces filled with Sn-Ag-Cu and MXene-Ti3C2 composite lubricants on tribological properties of CSS-42L bearing steel. Friction2022; 10: 1091–1113.
19.
XueYWShiXLZhangKP,et al.Friction characteristics of textured CSS-42L bearing steel filled with Sn-Ag-Cu-Ti3C2 under lubricated conditions. Tribol T2022; 65: 337–357.
20.
GeSTonderK. The fractal behavior and fractal characterization of rough surfaces. Tribology1997; 17: 73–80. (in Chinese).
21.
ZhuHGeSRCaoXC,et al.The changes of fractal dimensions of frictional signals in the running-in wear process. Wear2007; 263: 1502–1507.
22.
HanaorDAHGanYEinavI. Static friction at fractal interfaces. Tribol Int2016; 93: 229–238.
23.
GuanDJingLGongJJ,et al.Normal contact analysis for spherical pump based on fractal theory. Tribol Int2018; 124: 117–123.
24.
CheQXuFLiuP,et al.Research on fractal model of normal contact stiffness between two spheroidal joint surfaces considering friction factor. Tribol Int2016; 97: 253–264.
25.
ZhuDWangJWangQJ. On the stribeck curves for lubricated counterformal contacts of rough surfaces, ASME. J Tribol2015; 137: 021501.
26.
XieZLZhuWD. Theoretical and experimental exploration on the micro asperity contact load ratios and lubrication regimes transition for water-lubricated stern tube bearing. Tribol Int2021; 164: 107105.
27.
LiuLYangCShengYY. Wear model based on real-time surface roughness and its effect on lubrication regimes. Tribol Int2018; 126: 16–20.
