The behavior of a slot-entry hybrid herringbone-grooved journal-bearing system lubricated with a ferrofluid lubricant has been numerically studied. The modified Reynolds equation of a ferrofluid bearing model based on the Stokes micro-continuum theory has been numerically solved by a finite-element method. A MATLAB code based on the Gauss–Seidel iteration scheme has been solved to numerically simulate the bearing performance. The simulated results reveal that the use of a ferrofluid lubricant provides enhanced values of lubricant film thickness, fluid film stiffness/damping coefficient, and better stability threshold speed.
KuzhirP. Free boundary of lubricant film in ferrofluid journal bearings. Tribol Int2008; 41: 256–268.
2.
Torres-DíazIRinaldiC. Recent progress in ferrofluids research: novel applications of magnetically controllable and tunable fluids. Soft Matter2014; 10: 8584–8602.
3.
OsmanTNadaGSafarZ. Different magnetic models in the design of hydrodynamic journal bearings lubricated with non-Newtonian ferrofluid. Tribol Lett2003; 14: 211–223.
4.
OsmanTNadaGSafarZ. Effect of using current-carrying-wire models in the design of hydrodynamic journal bearings lubricated with ferrofluid. Tribol Lett2001; 11: 61–70.
5.
NadaGOsmanT. Static performance of finite hydrodynamic journal bearings lubricated by magnetic fluids with couple stresses. Tribol Lett2007; 27: 261–268.
6.
ZhangQChenSWinotoS, et al.Design of high-speed magnetic fluid bearing spindle motor. IEEE Trans Magn2001; 37(4): 2647–2650. DOI: 10.1109/20.951262.
7.
HuRXuC. Influence of magnetic fluids’ cohesion force and squeeze dynamic effect on the lubrication performance of journal bearing. Adv Mech Eng2017; 9(9): 1–13. DOI: 10.1177/1687814017732671.
8.
ZhangY. Static characteristics of magnetized journal bearing lubricated with ferrofluid. J Tribol1991; 113: 533–537.
9.
SorgeF. A numerical approach to finite journal bearings lubricated with ferrofluid. J Tribol1987; 109: 77–82.
10.
ChandraPSinhaPKumarD. Ferrofluid lubrication of a journal bearing considering cavitation. Tribol Trans1992; 35: 163–169.
11.
HuangSJiangLQianH, et al. On the magnetic sealing capability of ferrofluid-lubricated journal bearings. Proc R Soc Lond A Math Phys Sci1986; 404: 69–88.
12.
KumarDChandraPSinhaP. Ferrofluid lubrication of externally pressurized circular plates and conical bearings. Int J Eng Sci1993; 31: 593–604.
13.
ChangHChiCZhaoP. A theoretical and experimental study of ferrofluid lubricated four-pocket journal bearings. J Magn Magn Mater1987; 65: 372–374.
14.
GadANemat-AllaMKhalilA, et al.On the optimum groove geometry for herringbone grooved journal bearings. J Tribol2006; 128: 585–593.
15.
KangKRhimYSungK. A study of the oil-lubricated herringbone-grooved journal bearing—part 1: numerical analysis. J Tribol1996; 118: 906–911.
16.
KawabataNOzawaYKamayaS, et al.Static characteristics of the regular and reversible rotation type herringbone grooved journal bearing. J Tribol1989; 111: 484–490.
17.
YoshimotoSItoYTakahashiA. Pumping characteristics of a herringbone-grooved journal bearing functioning as a viscous vacuum pump. J Tribol2000; 122: 131–136.
18.
JangGChangD. Analysis of a hydrodynamic herringbone grooved journal bearing considering cavitation. J Tribol2000; 122: 103–109.
19.
Nemat-AllaMGadAKhalilA, et al.Static and dynamic characteristics of oil lubricated beveled-step herringbone-grooved journal bearings. J Tribol2009; 131: 011701.
20.
HirsG. The load capacity and stability characteristics of hydrodynamic grooved journal bearings. ASLE Trans1965; 8: 296–305.
21.
ZirkelbackNSan AndresL. Finite element analysis of herringbone groove journal bearings: a parametric study. J Tribol1998; 120: 234–240.
22.
JangGYoonJ. Nonlinear dynamic analysis of a hydrodynamic journal bearing considering the effect of a rotating or stationary herringbone groove. J Tribol2002; 124: 297–304.
23.
JangGYoonJ. Stability analysis of a hydrodynamic journal bearing with rotating herringbone grooves. J Tribol2003; 125: 291–300.
24.
KatoTObaraS. Improvement in dynamic characteristics of circular journal bearings by means of longitudinal microgrooves. Tribol Trans1996; 39: 462–468.
25.
ParkJ-KKimK-W. Stability analyses and experiments of spindle system using new type of slot-restricted gas journal bearings. Tribol Int2004; 37: 451–462.
26.
DeeCWShiresG. The current state of the art of fluid bearings with discrete slot inlets. J Lubr Technol1971; 93(4): 441–450 .
27.
YoshimotoS. Static characteristics of a slot-entry gas journal bearing with feeding holes. Trans ASME, J Tribol1988; 110: 587.
28.
RoweWKoshalDStoutK. Slot-entry bearings for hybrid hydrodynamic and hydrostatic operation. J Mech Eng Sci1976; 18: 73–78.
29.
XuS. Experimental investigation of hybrid bearings. Tribol Trans1994; 37: 285–292.
30.
StoutKPinkETawfikM. Comparison of slot-entry and orifice-compensated gas journal bearings. Wear1978; 51: 137–145.
31.
RoweWKoshalDStoutK. Investigation of recessed hydrostatic and slot-entry journal bearings for hybrid hydrodynamic and hydrostatic operation. Wear1977; 43: 55–69.
32.
IvesDRoweWB. The effect of multiple supply sources on the performance of heavily loaded pressurized high-speed journal bearings. In: Proc, 50 year of tribology conf, London, IMechE, London, Paper C 199/87, 1–3 July 1987, vol. 9(4), pp.121–127. London, UK.
33.
IvesDWestonWMortonPG, et al.A theoretical investigation of hybrid journal bearings applied to high speed heavily loaded conditions requiring jacking capabilities. In: Proceedings of the 15th Leeds-Lyon Symposium on Tribology held at Bodington Hall, The University of Leeds, 6–9 September 1988; vol. 14: 425–433.
34.
IvesDRoweWB. The performance of hybrid journal bearings in the superlaminar flow regimes. STLE Tribol Trans1992; 35: 627–634.
35.
KoshalDRoweWB. Fluid-film journal bearings operating in a hybrid mode: part I—theoretical analysis and design. ASME J Lub Tech1981; 103: 558–565.
36.
KoshalDRoweW. Fluid-film journal bearings operating in a hybrid mode: part II—experimental investigation. ASME1981; 103: 566–572.
37.
KoshalDRoweWB. Fluid-film journal bearings operating in a hybrid mode: part II—experimental investigation. ASME J Lub Tech1981; 103: 566–572.
38.
IseTNakatsukaMNagaoK, et al. Externally pressurized gas journal bearing with slot restrictors arranged in the axial direction. Prec Eng2017; 50: 286–292.
39.
NadaGSafarSOsmanT. Static and dynamic characteristics of magnetized journal bearings lubricated with ferrofluid. Tribol Int 2001; 34(6): 369–380.
YoshimotoS. Static characteristics of a slot-entry gas journal bearing with feeding holes. 1988, 110: 587–591.
42.
RahmatabadiANekoeimehrMRashidiR. Micropolar lubricant effects on the performance of noncircular lobed bearings. Tribol Int2010; 43: 404–413.
43.
SahuKSharmaSC. A simulation study on the behavior of magnetorheological fluid on herringbone-grooved hybrid slot-entry bearing. Tribol Trans 2019; 62(6): 1099–1118. DOI: 10.1080/10402004.2019.1649775.
44.
HamrockBJSchmidSRJacobsonBO. Fundamentals of fluid film lubrication. Boca Raton: CRC Press2004, p.728. ISBN-9780429215315.
45.
KhonsariMMBooserER. Applied tribology: bearing design and lubrication. Chichester, West Sussex, UK: John Wiley & Sons, 2017, p.672.
46.
CrosbyWChettiB. The static and dynamic characteristics of a two-lobe journal bearing lubricated with couple-stress fluid. Tribol Trans2009; 52: 262–268.
47.
TayalSSinhasanRSinghD. Analysis of hydrodynamic journal bearings having non-Newtonian lubricants using the finite element method. ASLE Trans1982; 25: 410–416.
48.
UrretaHLeichtZSanchezA, et al.Hydrodynamic bearing lubricated with magnetic fluids. J Intell Mater Syst Struct2010; 21: 1491–1499.
49.
SahuKSharmaSC. A study on performance of slot entry hybrid journal bearing considering effect of surface irregularities. Ind Lubr Tribol2018; 70: 1094–1109.
