This paper presents an approach to studying rolling element bearing damage under the interference of impact loading. In the experimental part, a series of bearing tests was performed by using the twin-disc test device with artificially damaged bearings. This was followed by analysis of the measured acceleration response data in impact-free condition as well as under the influence of the impact loading. The results showed successful detection of the bearing outer race damage by using typical bearing damage detection approaches regardless whether the impact loading was applied to the system or not. In turn, recognition of the bearing rolling element damage required specific signal processing.
McFaddenPDSmithJD. Model for the vibration produced by a single point defect in a rolling element bearing, J Sound Vib, 1984; 96: 69–82.
2.
DarlowMSBadgleyRHHoggGW. Application of high frequency resonance techniques for bearing diagnostics in helicopter gearboxes, technical report, US Army Air Mobility Research and Development Laboratory, Fort Eustis, Virginia, 1974, pp. 74–77.
3.
RandallRBAntoniJ.Review. Rolling element bearing diagnostics—A tutorial. Mech Syst Signal Process, 2011; 25: 485–520.
4.
AntoniJRandallRB. Fast computation of the kurtogram for the detection of transient faults. Mech Syst Signal Process, 2007; 20: 108–124.
5.
SmithWABorghesaniPNiQ,et al.Optimal demodulation-band selection for envelope-based diagnostics: a comparative study of traditional and novel tools. Mech Syst Signal Process, 2019; 134: 1–24.
6.
ZhangYRandallRB. Rolling element bearing fault diagnosis based on the combination of genetic algorithms and fast kurtogram, Mech. Syst Signal Process, 2009; 23: 1509–1517.
SawalhiNRandallRBEndoH. The enhancement of fault detection and diagnosis in rolling element bearings using minimum entropy deconvolution combined with spectral kurtosis. Mech Syst Sig Process2007; 21: 2616–2633.
9.
EndoHRandallRB. Application of a minimum entropy deconvolution filter to enhance autoregressive model based gear tooth fault detection technique. Mech Syst Sig Process2007; 21: 906–919.
10.
BoumahdiMLacoumeJ. Blind identification using the kurtosis: results of field data processing. ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings, 1995; 3: 1980–1983.
11.
BarszczTSawalhiN. Fault detection enhancement in rolling element bearings using the minimum entropy deconvolution. Arch Acoust2012; 37: 131–141.
12.
EndoHRandallRB. Enhancement of autoregressive model based gear tooth fault detection technique by the use of minimum entropy deconvolution filter. Mech Syst Signal Process, 2007; 21: 906–919.
13.
Al-BugharbeeHTrendafilovaI. A fault diagnosis methodology for rolling element bearings based on advanced signal pretreatment and autoregressive modelling. J Sound Vib, 2016; 369: 246–265.
14.
GuoJZhangHZhenD,et al.An enhanced modulation signal bispectrum analysis for bearing fault detection based on non-Gaussian noise suppression. Measurement, 2020; 151 (107240): 1–11. https://doi.org/10.1016/j.measurement.2019.107240
15.
BastamiARVahidS. Estimating the size of naturally generated defects in the outer ring and roller of a tapered roller bearing based on autoregressive model combined with envelope analysis and discrete wavelet transform. Measurement, 2020; 159(107767): 1–11. https://doi.org/10.1016/j.measurement.2020.107767
16.
AntoniJRandallRB. Unsupervised noise cancellation for vibration signals: part I—evaluation of adaptive algorithms. Mech Syst Signal Process, 2004; 18(1): 89–101. https://doi.org/10.1016/S0888-3270(03)00012-8
17.
RandallRBLiL. Diagnostics of planetary gear bearings in the presence of gear vibrations. In: IMECHE Conference Transactions. Mechanical Engineering Publications, 1995; 5: 73–80.
18.
ZhouLDuanFMbaD,et al.Using frequency domain analysis techniques for diagnosis of planetary bearing defect in a CH-46E helicopter aft gearbox. Eng Fail Anal, 2018; 92: 71–83
19.
ZhouLDuanFCorsarM,et al.A study on helicopter main gearbox planetary bearing fault diagnosis. Appl Acoust2019; 147: 4–14.
20.
VlcekBLZaretskyEV. Rolling-element fatigue testing and data analysis – A tutorial. Trib. Transactions, 2011; 54: 523–541.
21.
BrizmerVGabelliAVieillardC, et al.An experimental and theoretical study of hybrid bearing micropitting performance under reduced lubrication. Trib. Transactions2015; 58: 829–835.
22.
FowellMIoannidesSKadiricA. An experimental investigation into the onset of smearing damage in nonconformal contacts with application to roller bearings. Trib. Transactions2014; 57: 472–488.
23.
PapeFTerweyJTWieskerS,et al.Tribological research on the development of white etching cracks (WECs). Forsch Ingenieurwes2018; 82: 341–352
24.
GalbatoAT. Methods of testing for rolling contact fatigue of bearing steels. Rolling contact fatigue testing of bearing steels, HooJ. J. C. (Ed.), American Society of Testing Materials: Philadelphia, 1982, pp 169–189.
25.
HarrisTA.KotzalasMN. Advanced concepts of bearing technology: rolling bearing analysis, Fifth Edition, CRC Press LLC, Taylor & Francis Group, Boca Raton, FL, USA, 2007.
26.
KleemolaJLehtovaaraA. An approach for determination of lubricant properties at elliptical elastohydrodynamic contacts using a twin-disc test device and a numerical traction model. Proc Inst Mech Eng2008; 222: 797–806.
OilaABullSJ. Assessment of the factors influencing micropitting in rolling/sliding contacts. Wear2005; 258: 1510–1524.
30.
KleemolaJLehtovaaraA. Experimental evaluation of friction between contacting discs for the simulation of gear contact. TriboTest2007; 13: 13–20.
31.
JohanssonJ. On the influence of gear oil properties on pitting life. Luleå Sweden: Dissertation, Luleå University of Technology; 2015.
32.
TassiniNQuostXLewisR,et al.A numerical model of twin disc test arrangement for the evaluation of railway wheel wear prediction methods. Wear2010; 268: 660–667.
33.
HöhnB-RMichaelisKKreilO. Influence of surface roughness on pressure distribution and film thickness in EHL-contacts. Tribol Int2006; 39: 1719–1725.
34.
SavolainenMLehtovaaraA. An experimental approach for investigating scuffing initiation due to overload cycles with a twin-disc test device. Tribol Int2017; 109: 311–318.
35.
SavolainenMLehtovaaraA. An experimental investigation of scuffing initiation due to axial displacement in a rolling/sliding contact. Tribol Int2018; 119: 688–697.
36.
SavolainenMLehtovaaraA. An approach to investigating subsurface fatigue in a rolling/sliding contact. Int J Fatigue2018; 117: 180–188
37.
GuoJunchaoZhangHaoZhenDongZhanqun, et al.An enhanced modulation signal bispectrum analysis for bearing fault detection based on non-Gaussian noise suppression. Measurement, 2020; 151(107240).
38.
BorghesaniPPennacchiPChattertonS. The relationship between kurtosis- and envelope-based indexes for the diagnostic of rolling element bearings. Mech Syst Sig Process, 2014; 43: 25–43
39.
SchmidtSHeynsPSGrylliasKC. An informative frequency band identification framework for gearbox fault diagnosis under time-varying operating conditions. Mech Syst Sig Process, 2021; 158(107771): 1–26. https://doi.org/10.1016/j.ymssp.2021.107771
40.
NiuLCaoHHeZ, et al.A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects. J Sound Vib, 2015; 357: 207–232.
41.
LiuJShaoY. Dynamic modeling for rigid rotor bearing systems with a localized defect considering additional deformations at the sharp edges. J Sound Vib, 2017; 398: 84–102
42.
ISO 13373-1:2002. Condition monitoring and diagnostics of machines—Vibration condition monitoring - Part 1: General procedures.
43.
ISO 20816-1:2016. Mechanical vibration—Measurement and evaluation of machine vibration—Part 1: General guidelines.
AGMA 925-A03. Effect of lubrication on gear surface distress 2003.
46.
HammamiMMartinsRAbbesbMS,et al.Axle gear oils: tribological characterization under full film lubrication. Tribol Int2017; 106: 109–122.
47.
BrandtA. Noise and vibration analysis: signal analysis and experimental procedures. Wiley, Chichester, West Sussex, UK, 2011. 438p.
48.
DwyerR. Detection of non-Gaussian signals by frequency domain kurtosis estimation. In: ICASSP '83, IEEE International Conference on Acoustics, Speech, and Signal Processing, 1983; 607–610. doi: 10.1109/ICASSP.1983.1172264
49.
RandallRB. Vibration-based condition monitoring. Industrial, aerospace and automotive applications. Wiley, Chichester, West Sussex, UK, 2011. 289 p.
50.
HoD. Bearing diagnostics and self-adaptive noise cancellation. PhD dissertation (2000), University of New South Wales.
LeeJYNandiAK. Extraction of impacting signals using blind deconvolution. J Sound Vib, 1999; 232: 945–962.
53.
BorghesaniPAntoniJ. CS2 Analysis in presence of non-Gaussian background noise–effect on traditional estimators and resilience of log-envelope indicators. Mech Syst Sig Process, 2017; 90: 378–398.
