Abstract
Electrostatic cumulative discharges from the surfaces of polyurethane elastomers are often the primary cause of accidents and disasters, such as equipment failures, fires, and explosions, in industries. In this study, in order to improve the electrostatic protection performance of PU as well as to enhance the wear resistance of the PU matrix, copper foam was embedded in polyurethane to form a copper foam-based polyurethane composite with a three-dimensional connected metal skeleton. The mechanical properties, wear resistance, and antistatic capability of the composite were experimentally investigated. The results indicated that the connected metal skeleton structure forms a good conductive network and reduces the static electricity on the polyurethane composite surface to less than 1/10 of that on polyurethane. Moreover, owing to the mechanical support offered by metal skeletons with pore densities greater than 50 pores per inch, the wear resistance of the polyurethane composite is also enhanced, and consequently, its degree of wear is reduced to ∼1/5 of that of polyurethane under the same conditions.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
