Experimental study of friction coefficient of rocks in high pressure and tight gas reservoirs in Sichuan

Abstract

The calculation of torque and drag in horizontal wells and extended reach wells is an important element in drilling operations, but determining the value of the friction factor is difficult in the calculation of friction. Sichuan Basin constitutes a special gas reservoir system with high pressure and tight formations. They are favorable for gas production which can be accomplished economically only with horizontal drilling and hydraulic fracturing, and Xujiahe Formation is the focus of the exploration and development. In order to determine the reasonable friction factor for directional well and horizontal well in Xujiahe Formation and complete comprehensive evaluation method, both theoretical study on friction mechanism and experimental investigation on friction factor need to be carried out. A series of experiments are conducted for different lithology (sandstone, sand-mudstone, and mudstone), steel, and lubricants (mud systems). The test results are as follows: lubricants have the most obvious influence on the friction coefficient; the friction-reducing effect of the same lubricant on different friction pairs varies; and lubricants have very different effects on the same friction pair. Under the condition of lubrication with clear water, the friction coefficient of rock increases slightly as the normal load rises. Under lubrication with mud, the change range of the friction coefficient of rock with the increase of normal load is low. Rotation speed has limited impact on the friction coefficient. Under the same test condition, the friction coefficient of sandstone is a little higher in the three kinds of rocks. Through a large number of experimental studies, the value range of the friction coefficient of different kinds of rock in the fifth member in Xujiahe Formation is obtained, providing a scientific basis for the drilling design and the calculation of torque and drag in high pressure and tight formations in Sichuan.

Keywords

Friction calculation friction coefficient rock laboratory experiment high pressure and tight gas reservoir scientific basis

Get full access to this article

View all access options for this article.

References

Bai J and Su Y. The theory and practice of deviation control. Beijing, China: Petroleum Industry Press, 1990.

Gao

Liu

. Borehole trajectory control, Beijing, China: Petroleum University Press, 1994.

Zhao

Gong

. Drilling mechanics foundation, Beijing, China: Petroleum Industry Press, 1988.

Xie L and Moran D. Sophisticated software analysis system and use of torque/drag modeling for complex well operations increases operational efficiency. In: IADC/SPE drilling conference and exhibition, San Diego, CA, 6–8 March 2012, pp.1–13. San Diego, CA: Society of Petroleum Engineers.

Ren

Zheng

. Study of tribological mechanisms of carbon-based coatings in antiwear additive containing lubricants under high temperature. RSC Adv 2015; 81: 66426–66437.

Samuel

. Friction factors: what are they for torque, drag, vibration, bottom hole assembly and transient surge/swab analyses. J Petro Sci Eng 2010; 73: 258–266.

Aadnoy B. Theory and application of a new generalized model for torque and drag. Society of Petroleum Engineers. In: IADC/SPE Asia Pacific drilling technology conference and exhibition, Jakarta, Indonesia, 25–27 August 2008. pp.1–9. Jakarta, Indonesia: Society of Petroleum Engineers.

. Analysis and application of the friction torque of large displacement wells, China: Doctoral Dissertation, Southwest Petroleum University, 2001.

Jiang

Xiao

. Supporting technology of improving drilling speed in western Sichuan deep well. Oil Drill Technol 2010; 38: 30–33.

10.

Wang

Chen

Liu

. Big displacement well assembly design and analysis of friction torque. Nat Gas Ind 2012; 35: 24–27.

11.

Armstrong N. Extended reach drilling-offshore California. Extending capabilities and improving performance. In: Proceedings of the SPE/IADC drilling conference and exhibition, Amsterdam, the Netherlands, 1–3 March 2011, pp.1–13. Amsterdam, the Netherlands: Society of Petroleum Engineers.

12.

Stuart D. New drilling technology reduces torque and drag by drilling a smooth and straight wellbore. In: Proceedings of the SPE/IADC drilling conference, Amsterdam, the Netherlands, 19–21 February 2003, pp.1–12. Amsterdam, the Netherlands: Society of Petroleum Engineers.

13.

Rasheed W. Extending the reach and capability of non rotating BHAs by reducing axial friction. In: SPE/ICoTA coiled tubing roundtable, Houston, TX, 7–8 March 2001, pp.1–9. Houston, TX: Society of Petroleum Engineers.

14.

McCormik J. The practice and evolution of torque and drag reduction: theory and field results. In: Proceedings of the international petroleum technology conference (IPTC), Bangkok, Thailand, 15–17 November 2011, pp.1–13. Bangkok, Thailand: International Petroleum Technology Conference.

15.

Quan

Shi

. Friction and wear mechanism, Zhejiang, China: Zhejiang University Press, 1988.

16.

Zhou

. Friction wear and lubrication, Beijing, China: Petroleum Industry Press, 1997.

17.

Wang

. Chemistry of lubricant friction, Beijing, China: China Petrochemical Press, 1994.