Thermohydrodynamic analysis on herringbone-grooved mechanical face seals with a quasi-3D model

Abstract

A quasi-3D thermohydrodynamic model was introduced to analyze the seal performance of a herringbone-grooved mechanical face seal. In the model, the heat conduction equations of the seal rings and the energy equation of the lubrication film were solved simultaneously by the streamline upwind/Petrov–Galerkin finite element method. The Reynolds equation and the temperature equations were iteratively solved to obtain the liquid film pressure and the temperature distribution. A parameterized study was conducted to analyze the influence of the herringbone grooves’ geometry on the opening force, leakage rate, friction coefficient, and temperature rise. The results show that the hydrodynamic analysis overestimates the opening force because the viscous heat reduces the dynamic viscosity. The longer and narrower inner spiral groove gives the smaller leakage rate and the longer outer spiral groove with a smaller spiral angle shows the larger opening force.

Keywords

Thermohydrodynamic effect mechanical face seals herringbone spiral grooves cavitation finite element method

Get full access to this article

View all access options for this article.

References

Gabriel

. Fundamentals of spiral groove noncontacting face seals. Lubr Eng 1994; 50: 215–224.

Shapiro

Walowit

Henry

. Analysis of spiral-groove face seals for liquid oxygen. ASLE Tribol Trans 1984; 27: 177–188.

Glienicke J, Launert A, Schlums H, et al. Non-contacting gas lubricated face seals for high PV values. NASA paper 19950007196, 1994.

Muijderman

. Spiral groove bearings. Ind Lubr Tribol 1965; 17: 12–17.

Zirkelback

Andres

. Finite element analysis of herringbone groove journal bearings: a parametric study. ASME J Tribol 1998; 120: 234–240.

Jang

Chang

. Analysis of a hydrodynamic herringbone grooved journal bearing considering cavitation. ASME J Tribol 2000; 122: 103–109.

Wang Y. Face seal with spiral grooves. Patent 6152452, USA, 2000.

Wang

Yang

Wang

et al.

Theoretical analysis and field applications of gas-film lubricated mechanical face seals with herringbone spiral grooves. ASLE Tribol Trans 2009; 52: 800–806.

Wang

Yang

Wang

et al.

Experimental investigations and field applications of oil-film-lubricated mechanical face seals with spiral grooves. ASLE Tribol Trans 2005; 48: 589–596.

10.

Zheng XQ and Berard G. Development of non-contacting, film-riding face seals for large-diameter gas engines. AIAA paper 2001-3624, 2001.

11.

Zheng XQ, Gardner J and Berard G. Adaptive divert double-spiral groove face seals for high-speed, high temperature applications. AIAA paper 00–3373, In: Thirty-sixth AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit, Huntsville, Alabama, 17–19 July, 2000.

12.

Zhai

Wei

et al.

Theoretical and experimental analysis for leakage rate and dynamic characteristics of herringbone-grooved liquid seals. Proc IMechE, Part J: J Engineering Tribology 2015; 229: 849–860.

13.

Etsion

Pascovici

. A thermohydrodynamic analysis of a misaligned mechanical face seal. ASLE Tribol Trans 1993; 36: 589–596.

14.

Tournerie

Danos

Frene

. Three-dimensional modelling of THD lubrication in face seals. ASME J Tribol 2001; 123: 196–204.

15.

Qiu

Khonsari

. Thermalhydrodynamic analysis of spiral groove mechanical face seal for liquid application. ASME J Tribol 2012; 134: 021703–01–021703-11.

16.

Wang

Zhu

Lin

et al.

A thermohydrodynamic analysis of dry gas seals for high-temperature gas-cooled reactor. ASME J Tribol 2013; 135: 021701–1–021701-09.

17.

Kumar

Booker

. A mass and energy conserving finite element lubrication algorithm. ASME J Tribol 1994; 116: 667–671.

18.

Kim

. Thermo-elastohydrodynamic analysis of connecting rod bearing in internal combustion engine. ASME J Tribol 2001; 123: 444–454.

19.

Fatu

Hajjam

Bonneau

. A new model of thermoelastohydrodynamic lubrication in dynamically loaded journal bearings. ASME J Tribol 2006; 128: 85–95.

20.

Slawomir

Czeslaw

. A numerical analysis of the grooved surface effects on the thermal behavior of a non-contacting face seal. Procedia Eng 2012; 39: 315–326.

21.

Djamai

Brunetiere

Tournerie

. Numerical modeling of thermohydrodynamic mechanical face seals. ASLE Tribol Trans 2010; 53: 414–425.

22.

Stefani

Rebora

. Steadily loaded journal bearings: quasi-3D mass-energy-conserving analysis. Tribol Int 2009; 42: 448–460.

23.

Luan

Khonsari

. Heat transfer correlations for laminar flows within a mechanical seal chamber. Tribol Int 2009; 42: 770–778.

24.

Meng

Bai

Peng

. Lubrication film flow control by oriented dimples for liquid lubricated mechanical seals. Tribol Int 2014; 77: 132–141.

25.

Brooks

Hughes

TJR

. Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations. Comput Methods Appl Mech Eng 1982; 32: 199–259.