The effect of particle size on the dispersion and wear protection ability of MoS 2 particles in polyalphaolefin and trimethylolpropane ester

Abstract

The effect of particle size and surfactant on dispersion stability and wear protection ability was experimentally evaluated for polyalphaolefin (PAO 10) and bio-based base oil (palm trimethylolpropane ester) added with molybdenum disulfide (MoS₂) particles. Nanolubricants were developed by adding 1 wt% of MoS₂ particles that varied in size. In addition to the variation in particle size, an anionic surfactant was also used to analyze its interaction with both types of nanoparticles for stable suspensions and for the related effects on the antiwear characteristics. The wear protection characteristics of the formulations were evaluated by four-ball extreme pressure tests and piston ring on cylinder sliding wear tests. The wear surfaces were analyzed by scanning electron microscopy along with an energy-dispersive X-ray and an atomic force microscopy. The MoS₂ nanoparticles with a nominal size of 20 nm exhibited a better load-carrying capacity, while better sliding wear protection was provided by nanoparticles with a nominal size of 50 nm.

Keywords

Nanoparticles piston ring molybdenum disulfide polyalphaolefin trimethylolpropane ester

Get full access to this article

View all access options for this article.

References

Demas

Timofeeva

Routbort

et al.

Tribological effects of BN and MoS₂ nanoparticles added to polyalphaolefin oil in piston skirt/cylinder liner tests. Tribol Lett 2012; 47: 91–102.

Sridhara

Satapathy

. Effect of nanoparticles on thermal properties enhancement in different oils – A review. Crit Rev Solid State Mater Sci 2015; 40: 399–424.

Wang

Brogan

Tung

. Wear and scuffing characteristics of composite polymer and nickel/ceramic composite coated piston skirts against aluminum and cast iron cylinder bores. Wear 2001; 250: 706–717.

Lee

Hwang

Cheong

et al.

Understanding the role of nanoparticles in nano-oil lubrication. Tribol Lett 2009; 35: 127–131.

Choi

Lee

Hwang

et al.

Tribological behavior of copper nanoparticles as additives in oil. Curr Appl Phys 2009; 9: e124–e127.

Liu

et al.

Enhancing AW/EP property of lubricant oil by adding nano Al/Sn particles. Tribol Lett 2005; 18: 85–90.

Tsui

Liu

. Experimental analysis of tribological properties of lubricating oils with nanoparticle additives. Wear 2007; 262: 819–825.

Zhou

Zhang

et al.

Tribological behavior and lubricating mechanism of Cu nanoparticles in oil. Tribol Lett 2000; 8: 213–218.

H-l

Shi

P-j

et al.

Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant. Trans Nonferr Metals Soc China 2008; 18: 636–641.

10.

Shi

et al.

Characterization and nano-mechanical properties of tribofilms using Cu nanoparticles as additives. Surf Coat Technol 2008; 203: 28–34.

11.

Thottackkad

Perikinalil

Kumarapillai

. Experimental evaluation on the tribological properties of coconut oil by the addition of CuO nanoparticles. Int J Precis Eng Manuf 2012; 13: 111–116.

12.

Alves

Barros

Trajano

et al.

Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions. Tribol Int 2013; 65: 28–36.

13.

Yadgarov

Petrone

Rosentsveig

et al.

Tribological studies of rhenium doped fullerene-like MoS₂ nanoparticles in boundary, mixed and elasto-hydrodynamic lubrication conditions. Wear 2013; 297: 1103–1110.

14.

Gulzar

Masjuki

Varman

et al.

Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS₂ nanoparticles. Tribol Int 2015; 88: 271–279.

15.

Peng

Chen

Kang

et al.

Size effects of SiO₂ nanoparticles as oil additives on tribology of lubricant. Ind Lubric Tribol 2010; 62: 111–120.

16.

Rabaso

Ville

Dassenoy

et al.

Boundary lubrication: Influence of the size and structure of inorganic fullerene-like MoS₂ nanoparticles on friction and wear reduction. Wear 2014; 320: 161–178.

17.

Gullac

Akalin

. Frictional characteristics of IF-WS₂ nanoparticles in simulated engine conditions. Tribol Trans 2010; 53: 939–947.

18.

Zhou

Y-H

Harmelin

Bigot

. Sintering behaviour of ultra-fine Fe, Ni and Fe-25wt% Ni powders. Scripta Metall 1989; 23: 1391–1396.

19.

Kato

Komai

. Tribofilm formation and mild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfaces. Wear 2007; 262: 36–41.

20.

Viesca

Battez

González

et al.

Antiwear properties of carbon-coated copper nanoparticles used as an additive to a polyalphaolefin. Tribol Int 2011; 44: 829–833.

21.

Chou

Battez

Cabello

et al.

Tribological behavior of polyalphaolefin with the addition of nickel nanoparticles. Tribol Int 2010; 43: 2327–2332.

22.

Hernández Battez

González

Viesca

et al.

CuO, ZrO₂ and ZnO nanoparticles as antiwear additive in oil lubricants. Wear 2008; 265: 422–428.

23.

Spikes

. Friction modifier additives. Tribol Lett 2015; 60: 1–26.

24.

Liu

Qin

et al.

Investigation of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface. Tribol Lett 2004; 17: 961–966.

25.

Tao

Zhao

Kang

. The ball-bearing effect of diamond nanoparticles as an oil additive. J Phys D: Appl Phys 1996; 29: 2932–2932.