The static characteristics of misaligned three-axial water-lubricated journal bearing in the turbulent regime are analyzed for groove angles 36° and 18°. Ng and Pan’s turbulence model is applied to study the turbulence effects in the journal bearing. The static parameters such as load-carrying capacity, friction coefficient, and side leakage are found for different degree of misalignment (DM). The change in flow regime of the lubricant from laminar to turbulent and the increase in misalignment, improved the load capacity of the bearing. For lightly loaded bearings, the friction coefficient of the bearing increased with the increase in Reynolds number.
KumarV. Plain hydrodynamic bearings in the turbulent regime – A critical review. Wear1981; 72: 13–28.
2.
KumarARaoNS. Steady state analysis of plain cylindrical bearings in turbulent regime. Indian J Eng Mater Sci1995; 2: 163–166.
3.
HashimotoHWadaSTsunodaH. Performance characteristics of elliptical journal bearings in the turbulent regime. Bull JSME1984; 27: 2265–2271.
4.
SoniSCSinhasanRSinghDV. Performance characteristics of noncircular bearings in laminar and turbulent flow regimes. ASLE Trans1981; 24: 29–41.
5.
KumarARaoNS. Steady state performance of finite hydrodynamic porous journal bearings in turbulent regimes. Wear1993; 167: 121–126.
6.
VaidhyanathanKKeithTGJr. Performance characteristics of cavitated noncircular journal bearings in the turbulent flow regime. Tribol Trans1991; 34: 35–44.
7.
Litwin W. Influence of bearing bush geometry on properties of water lubricated marine main shaft bearings. In: World tribology congress, Kyoto, Japan, 2009.
8.
PrabhuBS. An experimental investigation on the misalignment effects in journal bearings. Tribol Trans1997; 40: 235–242.
9.
SafarZSRiadMSM. Prediction of the coefficient of friction of a misaligned turbulent flow journal bearing. Tribol Int1988; 21: 15–19.
10.
ShenoySBPaiR. Theoretical investigations on the performance of an externally adjustable fluid film bearing including misalignment and turbulence effects. Tribol Int2009; 42: 1088–1100.
MallyaRShenoySBPaiR. Steady state characteristics of misaligned multiple axial groove water-lubricated journal bearing. Proc IMechE, Part J: J Engineering Tribology2015; 229: 712–722.
13.
JunSGuiC. Hydrodynamic lubrication analysis of journal bearing considering misalignment caused by shaft deformation. Tribol Int2004; 37: 841–848.
14.
ArumugamPSwarnamaniSPrabhuBS. Effects of journal misalignment on the performance characteristics of three-lobe bearings. Wear1997; 206: 122–129.
15.
HargreavesDJ. Predicted performance of a tri-taper journal bearing including turbulence and misalignment effects. Proc IMechE, Part J: J Engineering Tribology1995; 209: 85–97.
16.
VijayaraghavanDKeithTG. Effect of cavitation on the performance of a grooved misaligned journal bearing. Wear1989; 134: 377–397.
17.
CabreraDLWoolleyNHAllansonDR. Film pressure distribution in water-lubricated rubber journal bearings. Proc IMechE, Part J: J Engineering Tribology2005; 219: 125–132.
18.
WangNMengQFWangPP. Research on film pressure distribution of water-lubricated rubber bearing with multi-axial grooves based on wireless measurement technique. J Fluids Eng ASME2013; 135: 1–6.
19.
Pai R, Hargreaves DJ and Brown R. Modelling of fluid flow in a 3-axial groove water bearing using computational fluid dynamics. In: 14th Australasian fluid mechanics conference, Adelaide University, Australia, 2001, pp.331–334.
20.
MajumdarBCPaiRHargreavesDJ. Analysis of water lubricated journal bearings with multiple axial grooves. Proc IMechE, Part J: J Engineering Tribology2004; 218: 135–146.
21.
PaiRSPaiR. Stability of four-axial and six-axial grooved water-lubricated journal bearings under dynamic load. Proc IMechE, Part J: J Engineering Tribology2008; 222: 683–691.
