The article aims to investigate the relationship between eccentricity ratio and the Sommerfeld number based on hydrodynamic water-lubricated journal bearings. Considering the differences between water and oil, especially the difference in vapor pressure, the effect of cavitation on pressure distribution of water film is analyzed based on three boundary conditions and a cavitation model by computational fluid dynamics (CFD). The result shows that the three boundary conditions are all not suitable to replace cavitation model in numerical analysis of water-lubricated journal bearings. Then numerical analysis of journal bearings with different dimensions is undertaken with the cavitation model under different working conditions. Based on the analysis, a reference is produced for designing water-lubricated journal bearings under hydrodynamic lubrication. At last, the reference is verified by experiments.
XiaoleiWKojiKKoshiA. Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water. Tribol Int2003; 36: 189–197.
2.
WojciechLitwin. Water-lubricated bearings of ship propeller shafts-problems, experimental tests and theoretical investigations. Polish Maritime Res2009; 16: 42–50.
3.
WojciechLitwin. Influence of main design parameters of ship propeller shaft water-lubricated bearings on their properties. Polish Maritime Res2010; 17: 39–45.
4.
GaoGYinZJiangD. Numerical analysis of plain journal bearing under hydrodynamic lubrication by water. Tribol Int2014; 75: 31–38.
5.
You-QiangWChaoL. Numerical analysis of hydrodynamic lubrication on water-lubricated rubber bearings. Adv Mater Res2011; 299-300: 12–16.
SantosENBlancoCJCMace doEN. Integral transform solutions for the analysis of hydrodynamic lubrication of journal bearings. Tribol Int2012; 52: 161–169.
8.
YamakiriHSasakiSKuritaT. Effects of laser surface texturing on friction behavior of silicon nitride under lubrication with water. Tribol Int2011; 44: 579–584.
9.
CabreraDLWoolleyNHAllansonDR. Film pressure distribution in water-lubricated rubber journal bearings. Proc IMechE, Part J: J Engineering Tribology2005; 219: 125–132.
10.
HuangWXuYZhengY. The tribological performance ofTi(C,N)-based cermet sliding against Si3N4 in water. Wear2011; 270: 682–687.
11.
SumerMUnalHMimarogluA. Evaluation of tribological behaviour of PEEK and glass fibre reinforced PEEK composite under dry sliding and water lubricated conditions. Wear2008; 265: 1061–1065.
12.
WangJYanFXueQ. Tribological behavior of PTFE sliding against steel in sea water. Wear2009; 267: 1634–1641.
13.
UnalHMimarogluA. Friction and wear characteristics of PEEK and its composite under water lubrication. J Reinf Plast Compos2006; 25: 1659–1667.
14.
Hori Y. Hydrodynamic lubrication. Tokyo: Springer Verlag, 2006.
15.
KhonsariMMRichard BooserE. Applied tribology-bearing design and lubrication, 2nd ed. New York: Wiley Blackwell, 2008.
SzeriAZ. Fluid film lubrication, 2nd ed. New York: Cambridge, 2011.
18.
MontazeriH. Numerical analysis of hydrodynamic journal bearings lubricated with ferrofluid. Proc IMechE, Part J: J Engineering Tribology2008; 222: 51–60.
19.
GertzosKPNikolakopoulosPGPapadopoulosCA. CFD analysis of journal bearing hydrodynamic lubrication by Bingham lubricant. Tribol Int2008; 41: 1190–1204.
20.
ChenPYPHahnEJ. Use of computational fluid dynamics in hydrodynamic lubrication. Proc IMechE, Part J: J Engineering Tribology1998; 212: 427–436.
21.
VersteegHMalalasekraW. An introduction to computational fluid dynamics, 2nd ed. New Jersey: Prentice Hall, 2007.
22.
LinQWeiZWangN. Analysis on the lubrication performaces of journal bearing system using computational fluid dynamics and fluid-structure interaction considering thermal influence and cavitation. Tribol Int2013; 64: 8–15.
23.
SivakBSivakM. The numerical solution of the Reynolds equation by a modified Ritz method. Wear1981; 72: 371–376.
24.
SfyrisDChasalevrisA. An exact analytical solution of the Reynolds equation for the finite journal bearing lubrication. Tribol Int2012; 55: 46–58.
25.
ChristophersonD. A new mathematical method for the solution of film lubrication problems. Proc Inst Mech Eng1941; 146: 126–135.
26.
TayalSPSinhasanRSinghDV. Analysis of hydrodynamic journal bearings having non-Newtonian lubricants. Tribol Int1982; 15: 17–21.
27.
D’AgostinoVSenatoreA. Analytical solution for two-dimensional Reynolds equation for porous journal bearings. Indus Lubricat Tribol2006; 58: 110–117.
28.
SahlinFGlavatskihSBAlmqvistT. Two-dimensional CFD-analysis of micro-patterned surfaces in hydrodynamic lubrication. J Tribol – Transact ASME2005; 127: 96–102.
29.
XiaoleiWKojiKKoshiA. Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water. Tribol Int2003; 36: 189–197.
30.
ANSYS FLUENT. Version 14.0: User manual, Canonsburg: ANSYS, Inc, 2011.
31.
Zwart PJ, Gerber AG and Belamri T. A two-phase flow model for predicting cavitation dynamics. In: Fifth international conference on multiphase flow, Yokohama, Japan, 2004.
