Thermal and efficiency characterization of a low-backlash planetary gearbox: An integrated numerical-analytical prediction model and its experimental validation
Restricted accessResearch articleFirst published online August, 2016
Thermal and efficiency characterization of a low-backlash planetary gearbox: An integrated numerical-analytical prediction model and its experimental validation
In the automation filed, low-backlash gearboxes are required to guarantee precise positioning. For such kind of applications, planetary speed reducers represent one of the most attractive solutions. This type of gearing ensures at the same time high power density and reduction ratios. On the other side, the compactness of the solutions leads to high operating temperatures. For this reason, it is important to be able to quantify the power dissipation and the operating temperatures already in the design stage, therefore to be able to find the best compromise between the load carrying capacity and the maximum transmittable power due to thermal limitations. For this reason, an innovative calculation method capable to quantify the efficiency under different operating conditions and the related operating temperatures was developed. Experimental tests were performed under different operating conditions to validate the predictions. The comparison shows good agreement.
ISO 6336-4:1996 Calculation of the load capacity of spur and helical gears.
4.
Michaelis K, Höhn B-R and Vollmer T. Thermal rating of gear drives—Balance between power loss and heat dissipation. AGMA, 1996.
5.
HöhnB-RMichaelisK. Optimization of gearbox efficiency. Goriva i Maziva2009; 48: 441–480.
6.
TalbotDKahramanA. Prediction of mechanical power loss of planet gear roller bearings under combined radial and moment loading. ASME J Mech Des2013; 135: 121007–121007.
7.
LiSKahramanA. Prediction of spur gear mechanical power losses using a transient elastohydrodynamic lubrication model. Tribol Trans2010; 53: 554–563.
8.
Thirumurugan R and Muthuveerappan G. Study on mesh power losses in high contact ratio (HCR) gear drives. In: 16th National Conference on Machines and Mechanisms (iNaCoMM2013), Roorkee, India, pp.169–176.
9.
AnderssonM. Churning losses and efficiency in gearboxes, Stockholm: KTH, 2014.
10.
OhlendorfH. Verlustleistung und Erwärmung von Stirnrädern, Munich: SAGE Journals, 1962.
11.
DawsonPH. Windage loss in larger high-speed gears. Proc IMechE1984; 198: 51–59.
12.
MauzW. Hydraulische Verluste von Stirnradgetrieben bei Umfangsgeschwindigkeiten bis 60 m/s, Stuttgart, Germany: Universität Stuttgart, 1987.
13.
AriuraYUenoT. Lubricant churning loss and its behavior in gear box in cylindrical gear systems. J Jpn Soc Lubr Eng1975; 20: 67–175.
14.
TerekhovAS. Hydraulic losses in gearboxes with oil immersion. Russian Eng J1975; 55: 7–11.
15.
BonessRJ. Churning losses of discs and gears running partially submerged in oil. In: Proceedings of the International Power Transmission and Gearing Conference: New Technologies for Power Transmissions of the 90's, Design Engineering Division, ASME, Chicago, Ill, USA, 1989, pp. 355–359.
16.
HöhnRBMichaelisKVollmerT. Thermal rating of gear drives balance between power losses and heat dissipation, Alexandria, VA, USA: AGMA FTM, 1996.
17.
LukePOlverA. A study of churning losses in dip-lubricated spur gears. Proc IMechE, Part G: J Aerospace Engineering1999; 213: 337–346.
18.
SeetharamanSKahramanA. Load-independent spin power losses of a spur gear pair: Model formulation. J Tribol2009; 131: 022201 (11 pp.)–022201 (11 pp.).
19.
MarchesseYChangenetCVilleF. Investigation on CFD simulations for predicting windage power losses on spur gears. J Mech Des2011; 133. Article number 024501.
20.
ChaariFRomdhaneMBBaccarW. Windage power loss in spur gear sets. WSEAS Trans Appl Theor Mech2012; 2: 159–168.
21.
HillMJKunzRFMedvitzRB. CFD analysis of gear windage losses: Validation and parametric aerodynamic studies. J Fluid Eng2011; 133.
22.
GorlaCConcliFStahlK. Hydraulic losses of gearbox: CFD analysis and experiments. Tribol Int2013; 66: 337–344.
ConcliFGorlaCDella TorreA. Windage power losses of ordinary gears: Different CFD approaches aimed to the reduction of the computational effort. Lubricants2014; 2: 162–176.
25.
Concli F and Gorla C. Analysis of the oil squeezing power losses of a spur gear pair by mean of CFD simulations. In: ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA2012, Nantes, France, 2012, pp.177–184.
26.
ConcliFGorlaC. A CFD analysis of the oil squeezing power losses of a gear pair. Computational and experimental study. Int J Comput Methods Exp Meas2014; 2: 157–167.
27.
ConcliFGorlaC. Oil squeezing power losses in gears: A CFD analysis. WIT Trans Eng Sci2012; 74: 37–48.
28.
Gorla C, Concli F, Stahl K, et al. Load independent power losses of ordinary gears: Numerical and experimental analysis. In: 5th World Tribology Congress, WTC 2013, Torino, Italy, 2013, pp.1243–1246.
29.
ConcliFGorlaCDella TorreA. Churning power losses of ordinary gears: A new approach based on the internal fluid dynamics simulations. Lubr Sci2014.
30.
ConcliFGorlaCConradoE. Analysis of power losses in an industrial planetary speed reducer: Measurements and computational fluid dynamics calculations. Proc IMechE, Part J: J Engineering Tribology2014; 228: 11–21.
31.
ConcliFGorlaC. Computational and experimental analysis of the churning power losses in an industrial planetary speed reducer. WIT Trans Eng Sci2012; 74: 287–298.
32.
ConcliFGorlaC. Influence of lubricant temperature, lubricant level and rotational speed on the churning power loss in an industrial planetary speed reducer: Computational and experimental study. Int J Comput Methods Exp Meas2013; 1: 353–366.
