The tribological behaviour of carbon fibre reinforced polyaryletherketones (PAEKs) through their glass transitions

Abstract

Advanced engineering polymers of the polyaryletherketone (PAEK) family with carbon fibre reinforcement are finding application in engineering systems as tribological bearing surfaces under severe operating conditions that cyclically move the polymer into and beyond the glass transition temperature region. To support such an application, the friction in high-speed and low-load PAEK-steel sliding contacts was investigated both unlubricated and lubricated with a trinonyl trimellitate ester, a base fluid for high temperature industrial lubricants. Four polymers in the PAEK family, PEEK, PEK, PEKEKK and PEKK, with 30 wt% of carbon fibre whiskers were tested against an AISI 4140 steel disc. When unlubricated, low friction depended upon the formation of a PAEK transfer film on the steel disc and when this became unstable in the glass transition region the friction increased to much higher levels with associated polymer surface damage. Frictional heating due to the high sliding speed dominated the differences in glass transition behaviour between the four PAEKs. When lubricated, the lubricant film controlled friction and there was no significant effect of the glass transition of any of the PAEKs. The irreversible nature of the glass transition in PAEKs in such tribological applications, due to high surface damage at high temperature, means that it is essential to ensure effective lubrication in both fluid film and boundary lubrication.