In this paper, the influence of surface roughness on the local tribological load with a dry sliding contact is studied. First, three artificial rough surfaces with similar structure but different asperity heights are generated and projected on a smooth ball. After that, a contact pattern is determined between a rough ball and a smooth surface taking into account the elastic only as well as the linear elastic-perfectly plastic material description. On the basis of the calculated contact pressure distribution, the subsurface stresses and a three-dimensional temperature distribution in the sliding contact are calculated. The solutions show that a low surface roughness not necessarily results in low local tribological load of the surface.
JohnsonKL. Contact mechanics, Cambridge: Cambridge University Press, 1985.
2.
GreenwoodJAWilliamsonJBP. Contact of nominally flat surfaces. Proc Royal Soc London Series A, Math Phys Sci1966; 295: 300–319.
3.
JacksonRLGreenI. A finite element study of elasto-plastic hemispherical contact against a rigid flat. ASME J Tribol2005; 127: 343–354.
4.
JacksonRKKogutL. Electrical contact resistance theory for anisotropic conductive films considering electron tunneling and particle flattening. IEEE Transact Component Packaging Technol2007; 30: 59–66.
5.
PopovVLHeßM. Methode der Dimensionsreduktion in Kontaktmechanik und Reibung, Berlin, Heidelberg: Springer, 2013.
6.
Néder Z. The effect of surface roughness on contact stress and thermal states of machine elements in the case of dry sliding friction (in Hungarian). PhD-Thesis, BUTE, Hungary, 1999.
7.
EleödA. Numerische Tribologie: Strukturveränderungs- und Verschleißsimulation mit Hilfe der Finiten Elementen Methode. Tribologie und Schmierunstechnik2008; 55: 3-17-22–3-17-22.
8.
Kießling A, Bartel D and Deters L. Simulation der Festkörperreibung von rauen Oberflächen mittels FEM. GfT Tribologie Fachtagung, Göttingen, 2013, Lecture 2.
9.
LorentzBAlbersA. A numerical model for mixed lubrication taking into account surface topography, tangential adhesion effects and plastic deformations. Tribol Int2013; 59: 259–266.
10.
BhushanB. Contact mechanics of rough surfaces in tribology: multiple asperity contact. Tribol Lett1998; 4: 1–35.
11.
NogiTKatoT. Influence of a hard surface layer on the limit of elastic contact – Part I: Analysis using a real surface model. J Tribol1997; 119: 493–500.
12.
VennerCHLubrechtAA. Multilevel methods in lubrication, Amsterdam: Elsevier, 2000.
13.
PolonskyIAKeerLM. A numerical method for solving rough contact problems based on the multi-level multi-summation and conjugate gradient techniques. Wear1999; 231: 206–219.
14.
Magyar B. Tribo-dynamische Untersuchungen von Zylinderschneckengetrieben. PhD Thesis, University of Kaiserslautern, Germany, 2012.
15.
KomvopoulosKYeN. Three-dimensional contact analysis of elastic-plastic layered media with fractal surface topographies. ASME J Tribol2001; 123: 632–640.
16.
ISO 25178-2:2012(2012) Geometrical product specifications (GPS) – Surface texture: Areal – Part 2: Terms, definitions and surface texture parameters, International Organization for Standardization.
17.
BowdenFPTaborD. The friction and lubrication of solids, Oxford: Clarendon Press, 1954.
18.
RedlichA. Simulation von Punktkontakten unter Mischreibungsbedingungen, Aachen: Shaker Verlag, 2002.
19.
LiuSWangQ. Studying contact stress fields caused by surface tractions with a discrete convolution and fast fourier transform algorithm. ASME J Tribol2002; 124: 36–45.
20.
BlokH. Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions. Proc General Discussion Lubricat Lubricant1937; 2: 222–235.
21.
CarslawHSJaegerJC. Conduction of heat in solids, Oxford: Clarendon Press, 1959.
22.
BhushanB. Introduction to tribology, New York: John Wiley, 2002.
23.
MagyarBSauerBHorákP. Tribological investigation of K type worm gear drives. Acta Polytechnica Hungarica2012; 9: 233–252.
24.
TianXKennedyFE. Maximum and average flash temperatures in sliding contacts. ASME J Tribol1994; 116: 167–174.
