Anti-corrosion phosphate ionic liquids were synthesized and evaluated as lubricants for the contact of steel/aluminum by using an Optimol SRV oscillating friction and wear tester under ambient conditions. Phosphate ionic liquids yield commendable tribological performance and are superior to the conventional ionic liquid lubricant 1-methy-3-hexylimidazolium hexafluorophosphate in terms of friction-reducing performance and anti-wear capacity. Contrastive experiments demonstrate that the simple mixing of two compounds (butylamine and dibutylphosphate) does not yield a mixture lubricant with better tribological properties as compared to the ionic liquid synthesized using these two compounds. The worn surfaces of aluminum discs were analyzed by using JSM-5600LV scanning electron microscope and PHI-5702 multifunctional X-ray photoelectron spectrometer. The friction reducing and anti-wear mechanisms originate from the layered structures of ionic liquids under boundary lubrication conditions and from the tribochemical interactions of ionic liquids with the fresh surface of the substrates.
JiménezAEBermúdezMD. Ionic liquids as lubricants for steel–aluminum contacts at low and elevated temperatures. Tribol Lett2006; 26(1): 53–60.
4.
HeenanDFJanuszkiewiczKRSulekHH. Wear and friction characteristics of aromatic thiocompounds during aluminum-on-steel sliding contact. Wear1988; 123: 257–268.
5.
Somi ReddyAPramila BaiBNMurthyKSS. Wear and seizure of binary Al-Si alloys. Wear1994; 171: 115–127.
6.
TorabianHPathakJPTiwariSN. Wear characteristics of Al-Si alloys. Wear1994; 172: 49–58.
7.
HannaHAShehataF. Friction and wear of Al–Si alloys. Lubr Eng1993; 49: 473–476.
8.
BermdezMDJimnezAESanesJ. Ionic liquids as advanced lubricant fluids. Molecules2009; 14(8): 2888–2908.
9.
MinamiI. Ionic liquids in tribology. Molecules2009; 14(6): 2286–2305.
10.
PalacioMBhushanB. A review of ionic liquids for green molecular lubrication in nanotechnology. Tribol Lett2010; 40: 247–268.
11.
ZhouFLiangYLiuW. Ionic liquid lubricants: designed chemistry for engineering applications. Chem Soc Rev2009; 38(9): 2590–2599.
12.
LiuWYeCGongQ. Tribological performance of room-temperature ionic liquids as lubricant. Tribol Lett2002; 13(2): 81–85.
13.
LuQWangHYeC. Room temperature ionic liquid 1-ethyl-3-hexylimidazolium-bis(trifluoromethylsulfonyl)-imide as lubricant for steel–steel contact. Tribol Int2004; 37(7): 547–552.
14.
WangHLuQYeC. Friction and wear behaviors of ionic liquid of alkylimidazolium hexafluorophosphates as lubricants for steel/steel contact. Wear2004; 256(1-2): 44–48.
15.
ZhaoQZhaoGZhangM. Tribological behavior of protic ionic liquids with dodecylamine salts of dialkyldithiocarbamate as additives in lithium complex grease. Tribol Lett2012; 48: 133–144.
16.
MuZLiuWZhangS. Functional room-temperature ionic liquids as lubricants for an aluminum-on-steel system. Chem Lett2004; 33(5): 524–525.
17.
MuZZhouFZhangS. Effect of the functional groups in ionic liquid molecules on the friction and wear behavior of aluminum alloy in lubricated aluminum-on-steel contact. Tribol Int2005; 38(8): 725–731.
18.
JiménezAEBermúdezMDIglesiasP. 1 -N-alkyl-3-methylimidazolium ionic liquids as neat lubricants and lubricant additives in steel–aluminium contacts. Wear2006; 260(7-8): 766–782.
19.
JiménezAEBermúdezMDCarriónFJ. Room temperature ionic liquids as lubricant additives in steel–aluminium contacts: influence of sliding velocity, normal load and temperature. Wear2006; 261(3-4): 347–359.
20.
QuJTruhanJJDaiS. Ionic liquids with ammonium cations as lubricants or additives. Tribol Lett2006; 22(3): 207–214.
21.
LiuXZhouFLiangY. Tribological performance of phosphonium based ionic liquids for an aluminum-on-steel system and opinions on lubrication mechanism. Wear2006; 261(10): 1174–1179.
22.
SwatloskiRPHolbreyJDRogersRD. Ionic liquids are not always green: hydrolysis of 1-butyl-3-methylimidazolium hexafluorophosphate. Green Chem2003; 5(4): 361–361.
23.
BakerGABakerSN. A simple colorimetric assay of ionic liquid hydrolytic stability. Aust J Chem2005; 58: 174–177.
Quaedflieg PeterJLMTimmersCMMarel GijsA. An alternative route to the preparation of (3'-5') methylene acetal linked di- and trinucleosides. Synthesis1993; 24(51): 627–633.
26.
ZhangLFengDXuB. Tribological characteristics of alkylimidazolium diethyl phosphates ionic liquids as lubricants for steel–steel contact. Tribol Lett2009; 34(2): 95–101.
27.
HuangZGaoDLiZ. The development of liquid electrolytes based on ionic liquids in lithium rechargeable batteries. Chin J Power Source2006; 30(9): 774–778.
28.
CaiMZhaoZLiangY. Alkyl imidazolium ionic liquids as friction reduction and anti-wear additive in polyurea grease for steel/steel contacts. Tribol Lett2010; 40: 215–224.
29.
NIST X-ray Photoelectron Spectroscopy (XPS) Database. Available at: http://srdata.nist.gov/xps/ (accessed 18 May 2013).
30.
BermúdezMDJiménezAE. Surface interaction and tribochemical processes in ionic liquid lubrication of aluminum-steel contacts. Int J Surface Sci Eng2007; 1(1): 100–110.
31.
QuJBlauPJDaiS. Tribological characteristics of aluminum alloys sliding against steel lubricated by ammonium and imidazolium ionic liquids. Wear2009; 267(5-8): 1226–1231.
32.
TorimotoTTsudaTOkazaki Ki. New frontiers in materials science opened by ionic liquids. Adv Mater2010; 22(11): 1196–1221.
33.
CaiMLiangYYaoM. Imidazolium ionic liquids as antiwear and antioxidant additive in poly(ethylene glycol) for steel/steel contacts. Appl Mater Interfac2010; 2(3): 870–876.
