Tribological behaviors of three novel imidazoline-type thiadiazole derivatives as multifunctional lubricant additives in biodegradable lithium grease

Abstract

Three novel imidazoline-type thiadiazole derivatives are prepared and used as antiwear and extreme-pressure additives in biodegradable lithium grease, and their tribological performances are evaluated using a four-ball tester. Tribological tests show that all derivatives are effective in reducing wear, especially at lower additive concentrations. Oleic acid-imidazoline-type thiadiazole derivative is a preferred additive to reduce wear. For the friction-reducing property of base grease, improvements after using these derivatives are not remarkable. On the other hand, these derivatives are also effective extreme-pressure additives. In order to understand the friction process further, chemical composition of tribofilms under antiwear/extreme-pressure regime is analyzed by X-ray absorption near edge structure spectroscopy, and thermal films are also considered for comparison. Thermal films formed by these imidazoline-type thiadiazole derivatives consist of adsorbed organic sulfide and ferrous sulfide. Sulfur presents several chemical valences in the antiwear regime, and tribofilms generated by stearic acid and lauric acid-imidazoline-type thiadiazole derivatives at 1.0 wt% are composed of ferrous disulfide, ferrous sulfide and ferrous sulfate. The appearance of disulfide suggests that the interfacial temperature between the upper ball and three lower balls under antiwear conditions is considerably low. Composition of extreme-pressure films generated by oleic acid and lauric acid-imidazoline-type thiadiazole derivatives is only ferrous sulfide, and the extreme-pressure film for stearic acid imidazoline-type thiadiazole derivative is a mixture of ferrous sulfide, ferrous sulfate, and adsorbed organic sulfide.

Keywords

Biodegradable grease thiadiazole derivative thermal film tribofilm X-ray absorption near edge structure

Get full access to this article

View all access options for this article.

References

NLGI. Lubricating grease guide, 4th edn. Kansas City, MO: NLGI, 1996.

Romero

Ferrer

. Determination of oil and grease by solid phase extraction and infrared spectroscopy. Anal Chim Acta 1999; 395(1–2): 77–84.

Gow

. Lubricating grease. In: Mortier

Fox

Orszulik

(eds) Chemistry and technology of lubricants. Heidelberg: Springer, 2010, pp.411–432.

Kajdas

Karpinska

Kulczycki

. Industrial lubricants. In: Mortier

Fox

Orszulik

(eds) Chemistry and technology of lubricants. Heidelberg: Springer, 2010, pp.239–292.

Odi-Owei

. Tribological properties of some vegetable oils and fats. Lubr Eng 1989; 45(11): 685–690.

Stachowiak

Batchelor

. Engineering tribology, 2nd edn. Woburn, MA: Butterworth-Heinemann, 2001.

Cann

. Grease lubrication of rolling element bearings—role of grease thickener. Lubr Sci 2007; 19(3): 183–196.

Gatzen

Pape

Bruening

. Correlation between performance and boundary layers in high speed bearings lubricated with polymer-enhanced greases. Tribol Int 2010; 43(5–6): 981–989.

Todd

. The 2000 grease production survey report: what does it mean?. NLGI Spokesman 2002; 65(10): 21–31.

10.

Stempfel

Schmid

. Biodegradable lubricating greases. NLGI 1991; 55(8): 25–33.

11.

Sullivan

. Soy grease on track for sales boom. Lube Report, 22 July 2003.

12.

Stempfel

. Practical experience with highly biodegradable lubricants, especially hydraulic oils and lubricating greases. NLGI 1998; 62(1): 8–23.

13.

Beran

. Experience with evaluating biodegradability of lubricating base oils. Tribol Int 2008; 41(12): 1212–1218.

14.

Cann

. Grease degradation in a bearing simulation device. Tribol Int 2006; 39(12): 1698–1706.

15.

Cann

Webster

Doner

. Grease degradation in ROF bearing tests. Tribol Trans 2007; 50(2): 187–197.

16.

Mota

Ferreira

. Inﬂuence of grease composition on rolling contact wear: experimental study. Tribol Int 2009; 42(4): 569–574.

17.

Singh

Bhattacharya

Verma

. EP activity assessment of certain nitrogen and sulfur heterocyclic compounds as potential additives in four ball test. Lubr Eng 1989; 46(10): 681–685.

18.

Zhang

Liu

Xue

. A study of N and S heterocyclic compound as a potential lubricating oil additive. Wear 1999; 224(1): 160–164.

19.

Zhang

Liu

Xue

. The effect of molecular structure of heterocyclic compounds containing N, O and S on their tribological performance. Wear 1999; 231(1): 65–70.

20.

Wan

Xue

. Antiwear and extreme pressure characteristics of 2-mercaptobenzothiazole derivative as the potential lubricating oil. Wear 1996; 192(1–2): 74–77.

21.

Ren

Xue

Wang

. A study of S-(1H-benzotriazol-1-yl)methyl N, N-dialkyldithiocarbamates as novel multifunctional oil additives. Wear 1994; 172(1): 59–64.

22.

Croudace

. Lubrication anti-wear additive. Patent 4,990,273, USA, 1991.

23.

Bhattacharya

Singh

Verma

. 1, 3, 4-Thiadiazoles as potential EP additives — a tribological evaluation using a four-ball test. Tribol Int 1995; 28(3): 189–194.

24.

Pou

Fouquay

. Sulphydryl acid and imidazoline stalts as inhibitors of carbon corrosion of iron and ferrous metals. Patent 6,395,225, USA, 2002.

25.

Edwards

Osborne

Webster

. Mechanistic studies of the corrosion inhibitor oleic imidazoline. Corros Sci 1994; 36(2): 315–325.

26.

Okafor

Liu

Zheng

. Corrosion inhibition of mild steel by ethylamino imidazoline derivative in CO₂-saturated solution. Corros Sci 2009; 51(4): 761–768.

27.

Hong

Jepson

. Corrosion inhibitor studies in large flow loop at high temperature and high pressure. Corros Sci 2001; 43(10): 1839–1849.

28.

Kasrai

Lennard

Brunner

. Sampling depth of total electron and fluorescence measurements in Si L- and K-edge absorption spectroscopy. Appl Surf Sci 1996; 99(4): 303–312.

29.

Najman

Kasrai

Bancroft

. X-ray absorption spectroscopy and atomic force microscopy of ﬁlms generated from organosulfur extreme-pressure (EP) oil additives. Tribol Lett 2003; 14(4): 225–235.

30.

Najman

Kasrai

Bancroft

. Chemistry of antiwear films from ashless thiophosphate oil additives. Tribol Lett 2004; 17(2): 217–229.

31.

Najman

Kasrai

Bancroft

. Investigating binary oil additive systems containing P and S using X-ray absorption near-edge structure spectroscopy. Wear 2004; 257(1–2): 32–40.

32.

Zhang

Najman

Kasrai

. Study of interaction of EP and AW additives with dispersants using XANES. Tribol Lett 2005; 18(1): 43–51.

33.

Yin

Kasrai

Bancroft

. Application of soft X-ray absorption spectroscopy in chemical characterization of antiwear ﬁlms generated by ZDDP. Part II: the effect of detergents and dispersants. Wear 1997; 202(2): 192–201.

34.

Yin

Kasrai

Fuller

. Application of soft X-ray absorption in chemical characterization of antiwear films generated by ZDDP. Part I: the effects of physical parameters. Wear 1997; 202(2): 172–191.

35.

Fuller

Yin

Kasrai

. Chemical characterization of tribochemical and thermal films generated from neutral and basic ZDDPs using X-ray absorption spectroscopy. Tribol Int 1997; 30(4): 305–315.

36.

Ren

. The tribological chemistry of polysulﬁdes in mineral oil and synthetic diester. Appl Surf Sci 2008; 254(22): 7232–7236.

37.

Dorinson

Ludema

. Mechanics and chemistry in lubrication. In: Tribology series, vol. 9. Amsterdam: Elsevier, 1985, pp. 457–469.

38.

Zeng

Cao

. XANES analysis of tribochemical and thermal films generating from some organic polysulfides. Chin Sci Bull 2006; 51(22): 2710–2716.

39.

McFadden

Soto

Spencer

. Adsorption and surface chemistry in tribology. Tribol Int 1997; 30(12): 881–888.

40.

Zhuang

Liu

. Microstructure and tribological properties of sulphide coating produced by ion sulphuration. Wear 1999; 225–229(2): 799–805.