Friction–speed characteristics of elastohydrodynamically lubricated contacts with anomalous film shapes

Abstract

An optical elastohydrodynamically lubricated (EHL) test rig was modified, so that the measurement of friction and mapping of the lubricated contact could be executed simultaneously. Pure sliding tests using viscous polybutene oils were carried out with very slow entrainment speeds to achieve isothermal conditions. The experimentally obtained friction–speed curves are characterized by anomalous wave shapes with two inflection points, a peak and a valley. This deviates from the traditional Stribeck curve, which is characterized by a monotonic increasing trend from EHL regime to hydrodynamic lubrication regime. Comparing the abnormal friction–speed curve with the corresponding film shapes, the two inflection points closely relate to the appearance of a dimple at the inlet of the contact and the loss of elastic deformation of the contact surfaces, respectively. Previous numerical studies hypothesized that the anomalous EHL film shape is due to boundary slippage. The present finding of a reduction in friction with the anomalous EHL film shapes gives further support to this hypothesis.

Keywords

elastohydrodynamic lubrication hydrodynamic lubrication boundary slippage Stribeck curve limiting shear stress

Get full access to this article

View all access options for this article.

References

Chiu

Sibley

. Contact shape and non-Newtonian effects in elastohydrodynamic point contacts. ASLE Lubr. Eng, 1972, 28, 48–60.

Kaneta

Nishikawa

Kameishi

Sakai

. Effect of elastic moduli of contact surface in elastohydrodynamic lubrication. ASME J. Tribol, 1992, 114, 75–80.

Kaneta

Nishikawa

Sakai

Matsuda

. Abnormal phenomena appearing in EHL contact. ASME J. Tribol, 1996, 118, 886–892.

Guo

Wong

. Experimental observation of a dimple-wedge elastohydrodynamic lubricating film. Tribol. Int, 2004, 37, 119–127.

Guo

Wong

. An anomalous elastohydrodynamic lubrication film – inlet dimple. ASME J. Tribol, 2005, 127, 425–434.

Guo

Wong

. Non-classical elastohydrodynamic lubricating film shape under large slide-roll ratios. Tribol. Lett, 2007, 27, 211–219.

Shieh

Hamrock

. Film collapse in EHL and micro-EHL. ASME J. Tribol, 1991, 113, 372–377.

Ehret

Dowson

Taylor

. On lubricant transport conditions in elastohydrodynamic conjunctions. Proc. R. Soc. Lond, 1998, A 454, 763–787.

Yang

Guo

. Theoretical investigation on the dimple occurrence in the thermal EHL simple sliding steel-glass circular contacts. Tribol. Int, 2000, 33, 59–65.

10.

Yang

Kaneta

Nishikawa

. Formation of steady dimples in point TEHL contacts. ASME J. Tribol, 2001, 123, 42–49.

11.

Yagi

Vergne

. Abnormal film shapes in sliding elastohydrodynamic contacts lubricated by fatty alcohols. Proc. IMechE, Part J: J. Engineering Tribology, 2007, 221, 287–300.

12.

Carli

Sharif

Ciulli

Evans

Snidle

. Thermal point contact EHL analysis of rolling/sliding contacts with experiment comparison showing anomalous film shapes. Tribol. Int, 2009, 42, 517–525.

13.

Gelinck

ERM

Schipper

. Calculation of Stribeck curves for line contacts. Tribol. Int, 2000, 33, 175–181.

14.

Guo

Wong

. A multi-beam intensity-based approach for lubricant film measurements in non-conformal contacts. Proc. IMechE, Part J: J. Engineering Tribology, 2002, 216, 281–291.

15.

Guo

Wong

. Theoretical study on the interferometry of thin EHL film measurement. Tribol. Lett, 2008, 31, 57–65.