Sage Journals: Discover world-class research

Abstract

A numerical simulation method is proposed to analyse the hydrodynamic lubrication performances of lip seal based on surface topography of sealing lip and shaft, lip interference, lip deformation, etc. The method, which can simulate the lubrication characteristics of lip seal under different interferences, is more reasonable than other existing methods. The proposed method was applied to auto water pump bearing’s seal. The surfaces of sealing lip and shaft are modelled, and the maximum film pressure, the average film pressure, the minimum film thickness, the average film thickness, and the friction on lip surface of stable working stage are calculated. Therelationship between the lubrication characteristics and initial interference are obtained. The results will be very helpful for lip interference determination and optimization of auto water pump bearing’s seal.

Keywords

lip seals lubrication characteristics numerical simulation method

Get full access to this article

View all access options for this article.

References

Jagger

. Study of the lubrication of synthetic rubber rotary shaft seals. Proceedings of the Conference on Lubrication and wear, 1957, 409–415 Institution of Mechanical Engineers, London.

Müller

. Concepts of sealing mechanism of rubber lip type rotary shaft seal. Proceedings of the 11th International Conference on Fluid sealing, BHRA, Cannes, France, April 1987, 698–709.

Horve

. Understanding the sealing mechanism of the radial lip seal for rotating shafts. Proceedings of the 13th BHRG International Conference on Fluid sealing Nau

, 1992, 5–19 Kluwer, Dordrecht, The Netherlands.

Gabelli

. Micro-elastohydrodynamic lubricant film formation in rotary lip seal contact. Proceedings of the 15th Leeds–Lyon Symposium on Tribology, Leeds, UK, 6–9 September 1988, 57–68.

Gabelli

Poll

. Formation of lubricant film in rotary sealing contacts: part 1 – lubricant film modeling. J. Tribol, 1992, 114, 280–289.

Salant

. Elastohydrodynamic model of the rotary shaft lip-type seal. Tribol. Int, 1992, 114, 485–492.

Salant

. Modelling rotary lip seal. Wear, 1997, 207, 92–99.

Salant

. Theory of lubrication of elastomeric rotary shaft seal. Proc. IMechE, Part J: J. Engineering Tribology, 1999, 21, 597–616.

Shi

Salant

. Numerical study of a rotary lip seal with a quasi-random sealing surface. J.Tribol, 2001, 123, 517–524.

10.

Hajjam

Bonneau

. Elastohydrodynamic analysis of lip seals with microundulations. J. Eng. Tribol, 2004, 218, 13–21.

11.

Maoui

Hajjam

Bonneau

. Effect of 3D lip deformations on elasohydrodynamic lip seals behavior. Tribol. Int, 2008, 41, 901–907.

12.

Thatte

Salant

. Transient EHL analysis of an elastomeric hydraulic seal. Tribol. Int, 2009, 42(10), 1424–1432.

13.

Thatte

Salant

. Elastohydrodynamic analysis of an elastomeric hydraulic rod seal during fully transient operation. J. Tribol, 2009, 131(3), 031501–031501.

14.

Salant

Shen

. Hydrodynamic effects of shaft surface finish on lip seal operation. Tribol. Trans, 2002, 45, 404–410.

15.

Shen

Salant

. Elastohydrodynamic analysis of the effect of shaft surface finish on the rotary lip seal behavior. Tribol. Trans, 2003, 46, 391–396.

16.

Hadinata

Stephens

. Soft elastohydrodynamic analysis of radial lip seals with deterministic microasperities on the shaft. ASME J. Tribol, 2007, 129, 851–859.

17.

Thomas Tom

. Rough surface, 1999 (Imperial College Press, London).

18.

Patir

. A numerical procedure for random generation of rough surfaces. Wear, 1978, 47(2), 263–277.

19.

Timoshenko

Goodier

. Theory of elastisity, 1951 (McGraw-Hill, New York).

20.

Keping

Dong

Shizhu

. A new numerical technique for computing surface elastic deformation caused by a given normal pressure distribution. J. Tribol, 1985, 107, 128–132.

A numerical simulation method for hydrodynamic lubrication of lip seal

Abstract

Keywords

Get full access to this article

References