The aim of this study is to find a connection between mechanical engineering and biotechnology by utilizing biomimetics in lubrication. The objective is to improve boundary lubrication by biomolecules in water-based systems. Proteins were used because they can form films and multilayers on the surfaces and thus prevent direct contact between them. In this study, hydrophobin and albumin proteins are studied as additives to enable water lubrication.
McFaddenC.SotoC.SpencerN. D.Adsorption and surface chemistry in tribology. Tribol. Int., 1997, 30, 881–888.
2.
DowsonD.NevilleA.Bio-tribology and bio-mimetics in the operating environment. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220, 109–123.
3.
NevilleA.MorinaA.LiskiewiczT.YanY.Synovial joint lubrication – does nature teach more effective engineering lubrication strategies?Proc. IMechE, Part C: J. Mechanical Engineering Science, 2007, 221, 1223–1230.
4.
HolmbergK.Elastohydrodynamic lubrication theory and its applications on machine elements. Lic. Thesis, Helsinki University of Technology, 1980.
5.
HillsB. A.Boundary lubrication in vivo. Proc. IMechE, Part H: J. Engineering in Medicine, 2000, 214, 83–94.
6.
SchwarzI. M.HillsB. A.Surface-active phospholipids as the lubricating component of lubricin. Br. J. Rheumatology, 1998, 37, 21–26.
7.
MorinaA.LiskiewiczT.NevilleA.Designing new lubricant additives using biomimetics. Design and Nature III: Comparing Design in Nature with Science and Engineering, 2006, 87, 157–166.
LimG. H.ChuaP. S. K.HeY. B.Modern water hydraulics – the new energy-transmission technology in fluid power. Appl. Energy, 2003, 76, 239–246.
10.
MasukoM.SuzukiA.SagaeY.TokoroM.YamamotoK.Friction characteristics of inorganic or organic thin coatings on solid surfaces under water lubrication. Tribol. Int., 2006, 39, 1601–1608.
11.
TomalaA.KarpinskaA.WernerW. S. M.OlverA.StöriH.Tribological properties of additives for water-based lubricants. Wear, 2010, 269, 804–810.
12.
SantosO.NylanderT.PaulssonM.TrägårdhC.Whey protein adsorption onto steel surfaces - effect of temperature, flow rate, residence time and aggregation. J. Food Eng., 2006, 74, 468–483.
ZapponeB.RuthsM.GreeneG. W.JayG. D.IsraelachviliJ. N.Adsorption, lubrication, and wear of lubricin on model surfaces: polymer brush-like behavior of a glycoprotein. Biophys. J., 2007, 92, 1693–1708.
15.
SpencerD. S.XuK.LoganT. M.ZhouH.-X.Effects of pH, salt and macromolecular crowding on the stability of FK506-binding protein: an integrated experimental and theoretical study. J. Mol. Biol., 2005, 351, 219–232.
16.
TanakaN.NishizawaH.KunugiS.Structure of pressure-induced denatured state of human serum albumin: a comparison with the intermediate in urea-induced denaturation. Biochim. Biophys. Acta, 1997, 1338, 13–20.
17.
FarruggiaB.PicoG.Thermodynamic features of the chemical and thermal denaturations of human serum albumin. Int. J. Biol. Macromol., 1999, 26, 317–323.
18.
WangZ.HuangY.LiS.XuH.LinderM. B.QiaoM.Hydrophilic modification of polystyrene with hydrophobin for time-resolved immunofluorometric assay. Biosens. Bioelectron., 2010, 26, 1074–1079.
19.
van der VegtW.van der MeiH. C.WöstenH. A. B.WesselsJ. G. H.BusscherH. J.A comparison of surface activity of the fungal hydrophobin SC3p with those of other proteins. Biophys. Chem., 1996, 57, 253–260.
20.
LinderM.SzilvayG.Nakari-SetäläT.PenttiläM.Hydrophobins: the protein-amphiphiles of filamentous fungi. FEMS Microbiol. Rev., 2005, 29, 877–896.
21.
LinderM. B.Hydrophobins: proteins that self assemble at interfaces. Curr. Opin. Colloid Interface Sci., 2009, 14, 356–363.
22.
ColesJ. M.ChangD. P.ZauscherS.Molecular mechanisms of aqueous boundary lubrication by mucinous glycoproteins. Curr. Opin. Colloid Interface Sci., 2010, 15, 406–416.
23.
Ahlroos, T., Linder, M., Helle, A., Holmberg, K., Nevanen, T., and Varjus, S. Biomimetic approach to boundary lubrication. In Proceedings of ECOTRIB09, the 2nd European Conference on Tribology, Pisa, Italy, 7–10 June 2009, pp. 473–478 (Edizioni ETS, Pisa).
24.
RobaM.NakaM.GautierE.SpencerN. D.CrockettR.The adsorption and lubrication behavior of synovial fluid proteins and glycoproteins on the bearing-surface materials of hip replacements. Biomaterials, 2009, 30, 2072–2078.
25.
LeeS.MullerM.Ratoi-SalageanM.VörösJ.PascheS.De PaulS. M.SpikesH. A.TextorM.SpencerN. D.Boundary lubrication of oxide surfaces by poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) in aqueous media. Tribol. Lett., 2003, 15, 231–239.
26.
FeilerA. A.SahlholmA.SandbergT.CaldwellK. D.Adsorption and viscoelastic properties of fractionated mucin (BSM) and bovine serum albumin (BSA) studied with quartz crystal microbalance (QCM-D). J. Colloid Interface Sci., 2007, 315, 475–481.
27.
LeeS.MüllerM.RezwanK.SpencerN. D.Porcine gastric mucin (PGM) at the water/poly(dimethylsiloxane) (PDMS) interface: influence of pH and ionic strength on its conformation, adsorption, and aqueous lubrication properties. Langmuir, 2005, 21, 8344–8353.
