Simulation training on bedside veno-arterial extracorporeal membrane oxygenation decannulation

Abstract

Veno-arterial extracorporeal membrane oxygenation is a form of mechanical circulatory support for patients with refractory decompensated heart failure. Blood is drawn from a large vein and pumped back to a large artery, usually a femoral artery through large bore catheters. When the heart recovers, the extracorporeal membrane oxygenation support can be terminated and the catheters are decannulated. The bleeding at the venous side can be controlled by prolonged compression; however, the arteriotomy wound needs to be repaired. Conventionally, the arteriotomy wounds require open vascular repair in the operating theater. The novel application of percutaneous vascular closure devices, which have been commonly used in vascular operations and percutaneous structural heart interventions, could be applied for closure of arteriotomy wounds at the bedside after extracorporeal membrane oxygenation support. The post-close ProGlide (Abbott Vascular) technique was shown to be safe and could potentially save time and manpower. The wounds are much smaller as compared with the conventional open repair and potentially, the chance of wound infection can be reduced. However, the success of percutaneous bedside closure requires careful prior planning and technique training. Backup plans with vascular surgeons’ standby are essential in case of failure of closure. Staffs in the extracorporeal membrane oxygenation centers need to be familiar with the preparation, the procedure as well as the device application technique for successful percutaneous closure. The long learning curve and the limited case load mean that such skills are best trained by simulation scenarios. This article described how this new technique and the team logistics can be trained by simulation.