Abstract
Introduction
Iris prostheses are an integral tool for the management of symptoms in the setting of damaged, insufficient, or absent irides. Fixation of a custom iris prosthesis in the absence of capsular support raises similar challenges to the fixation of an intraocular lens (IOLs) without capsular support. Centration and planar orientation of these larger iris devices are perhaps even more important than with IOLs.
Methods
We describe two variations of a reliably reproducible suture fixation technique for securing these special devices using a modification of the tiltless, centration-adjustable suture technique for sclerally-fixated posterior chamber IOLs.
Results
We described a few techniques that are safe and reproductible. That have been used in more than 300 cases in our co-hort with success and follow-ups of over 10 year.
Conclusion
We go over the technique step-by-step, highlighting the critical steps and pitfalls to avoid complications and achieve satisfactory results and aiming to get more surgeons to use these techniques and help facilitate the steep learning curve some of the steps might have.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
